Szczegóły produktu
L-com's LCCA30340-FT2 is a low loss 4.3-10 male to N female cable assembly using LMR-600 coax, 2 FT with Times Microwave components and ships same-day. The LMR-600 coax of this 4.3-10 cable uses the PE (F) dielectric with a VoP of 87%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com 4.3-10 to N cable assembly has a male to female gender configuration with flexible LMR-600 series coax and operates to 5.8 GHz. The double shield of this 4.3-10 cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this 4.3-10 male to 4.3-10 female cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30340-FT2 L-com Low Loss 4.3-10 Male to N Female Cable Assembly using LMR-600 Coax, 2 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
Numer części (MPN)
Impedancja
50 Ohm
Interfejs
4.3-10
niestandardowy kabel RF z rysunku dla sourcingu produkcyjnego
niestandardowy kabel RF z rysunku zorientowane na produkcję, z review kompatybilności, wskazówkami MOQ i wsparciem cost-down sourcing.
Co przygotować przed RFQ Jasne dane wejściowe ograniczają domysły i przyspieszają odpowiedź. ⌄
- • Udostępnij referencyjny MPN, część współpracującą lub markę źródłową, jeśli ma to znaczenie dla weryfikacji.
- • Dodaj BOM, podział ilościowy i roczne zapotrzebowanie, jeśli projekt wykracza poza prototyp.
- • Dołącz rysunek, kartę danych lub kluczowe wymagania dotyczące impedancji, częstotliwości, montażu i powłoki.
Obraz
Kliknij, aby powiększyć.
Specifications
| Interfejs | Coaxial Cable Assemblies |
|---|---|
| Interfejs | LMR-600 |
| Interfejs | 4.3-10 |
| Interfejs | N |
| Impedancja | 50 Ohm |
| Impedancja | 50 Ohm |
| Impedancja | 50 Ohm |
| Płeć | Male |
| Płeć | Female |
| Orientacja | Straight |
| Orientacja | Straight |
| Connector 1 Body Material | Brass |
Show 5 more specs
| Connector 1 Body Plating | Tri-Metal |
|---|---|
| Connector 1 Polarity | Standard |
| Connector 2 Polarity | Standard |
| Typ kabla | LMR-600 |
| Category | Coaxial Cable Assemblies |
Opis
Aktualne dane referencyjne dla LCCA30340-FT2: 4.3-10 · 50 Ohm · Straight. Katalog podaje konfigurację jako: Straight. Impedancja jest podana jako 50 Ohm. Jeśli to parametr krytyczny, potwierdź go ponownie w RFQ. Jeśli brak tu danych montażu, potwierdź je z rysunku lub wymagań połączenia. Materiał jest podany jako Brass. Pomaga to w weryfikacji, ale nie zastępuje potwierdzenia pełnej konstrukcji projektu. Ta strona służy do wstępnego wyboru przed RFQ, a nie jako ostateczne zatwierdzenie.
Użyj tej strony do wstępnej selekcji przed RFQ. Ścieżka dostaw i produkcja na zamówienie MOQ 200+ są potwierdzane po przeglądzie rysunku/specyfikacji/BOM.
Podobne złącza
Mogą Cię też zainteresować te modele:
LCCA30217-FT1.5
L-com's LCCA30217-FT1.5 is a low loss 7/16 DIN male to 7/16 DIN male cable assembly using LMR-600-DB coax, 1.5 FT with Times Microwave components and ships same-day. The LMR-600-DB coax of this 7/16 DIN cable uses the PE (F) dielectric with a VoP of 87%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com 7/16 DIN to 7/16 DIN cable assembly has a male to male gender configuration with flexible LMR-600-DB series coax and operates to 5.8 GHz. The double shield of this 7/16 DIN cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this 7/16 DIN male to 7/16 DIN male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30217-FT1.5 L-com Low Loss 7/16 DIN Male to 7/16 DIN Male Cable Assembly using LMR-600-DB Coax, 1.5 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
22510047
Our standard PE coax cables consist of single or double shielding with a range of 50 and 75 ohm to deliver high-quality performance along with highly-efficient insertion loss.
7000-12601-0000000
Circular DIN złącza MOSA M12 żeński 0 FIELD-WIREABLE (IDC), 4-pol. 0.25...0.5 mm
PE3C10352
7/16 DIN Male to 4.3-10 Male Low PIM Cable Using TCOM-400 Coax With Times Microwave Components
C09111H0080014U
Circular DIN złącza 8PIN 6-8 mm męski zacisk TERMINATION
LCCA30339-FT1.5
L-com's LCCA30339-FT1.5 is a low loss 4.3-10 male to N male right angle cable assembly using LMR-600 coax, 1.5 FT with Times Microwave components and ships same-day. The LMR-600 coax of this 4.3-10 cable uses the PE (F) dielectric with a VoP of 87%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com 4.3-10 to N cable assembly has a male to male gender configuration with flexible LMR-600 series coax and operates to 5.8 GHz. The double shield of this 4.3-10 cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. This right angle N cable interface on the LMR-600 coax allows for easier connections in tight spaces. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this 4.3-10 male to 4.3-10 male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30339-FT1.5 L-com Low Loss 4.3-10 Male to N Male Right Angle Cable Assembly using LMR-600 Coax, 1.5 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
Wyszukiwanie MPN Obsługuje dopasowanie dokładne, prefiksowe i częściowe. ⌄
Zastrzeżenie
Cstone to profesjonalna fabryka, a nie firma handlowa, specjalizująca się w złączach RF i koncentrycznych, adapterach oraz zespołach kablowych, w tym N-type, BNC, SMA, SMP, SSMB i MMCX. Produkujemy złącza według rysunków 2D lub próbek; dopasowanie, MOQ, termin i szczegóły produkcji potwierdzamy w RFQ. Cstone Technology nie jest powiązana z oryginalnymi markami. Nazwy producentów, znaki towarowe, symbole i numery części są używane wyłącznie do identyfikacji i odniesień krzyżowych. Znaki towarowe pozostają własnością ich odpowiednich właścicieli. Ostateczna przydatność jest potwierdzana na podstawie przeglądu rysunku/specyfikacji podczas RFQ.