Szczegóły produktu
L-com's LCCA30218-FT2 is a low loss 4.3-10 male to 4.3-10 male cable assembly using LMR-600-DB coax, 2 FT with Times Microwave components and ships same-day. The LMR-600-DB coax of this 4.3-10 cable uses the PE (F) dielectric with a VoP of 87%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com 4.3-10 to 4.3-10 cable assembly has a male to male gender configuration with flexible LMR-600-DB series coax and operates to 5.8 GHz. The double shield of this 4.3-10 cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this 4.3-10 male to 4.3-10 male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30218-FT2 L-com Low Loss 4.3-10 Male to 4.3-10 Male Cable Assembly using LMR-600-DB Coax, 2 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
Numer części (MPN)
Impedancja
50 Ohm
Interfejs
4.3-10
niestandardowy kabel RF z rysunku dla sourcingu produkcyjnego
niestandardowy kabel RF z rysunku zorientowane na produkcję, z review kompatybilności, wskazówkami MOQ i wsparciem cost-down sourcing.
Co przygotować przed RFQ Jasne dane wejściowe ograniczają domysły i przyspieszają odpowiedź. ⌄
- • Udostępnij referencyjny MPN, część współpracującą lub markę źródłową, jeśli ma to znaczenie dla weryfikacji.
- • Dodaj BOM, podział ilościowy i roczne zapotrzebowanie, jeśli projekt wykracza poza prototyp.
- • Dołącz rysunek, kartę danych lub kluczowe wymagania dotyczące impedancji, częstotliwości, montażu i powłoki.
Obraz
Kliknij, aby powiększyć.
Specifications
| Interfejs | Coaxial Cable Assemblies |
|---|---|
| Interfejs | LMR-600-DB |
| Interfejs | 4.3-10 |
| Interfejs | 4.3-10 |
| Impedancja | 50 Ohm |
| Impedancja | 50 Ohm |
| Impedancja | 50 Ohm |
| Płeć | Male |
| Płeć | Male |
| Orientacja | Straight |
| Orientacja | Straight |
| Connector 1 Body Material | Brass |
Show 5 more specs
| Connector 1 Body Plating | Tri-Metal |
|---|---|
| Connector 1 Polarity | Standard |
| Connector 2 Polarity | Standard |
| Typ kabla | LMR-600-DB |
| Category | Coaxial Cable Assemblies |
Opis
Aktualne dane referencyjne dla LCCA30218-FT2: 4.3-10 · 50 Ohm · Straight. Katalog podaje konfigurację jako: Straight. Impedancja jest podana jako 50 Ohm. Jeśli to parametr krytyczny, potwierdź go ponownie w RFQ. Jeśli brak tu danych montażu, potwierdź je z rysunku lub wymagań połączenia. Materiał jest podany jako Brass. Pomaga to w weryfikacji, ale nie zastępuje potwierdzenia pełnej konstrukcji projektu. Ta strona służy do wstępnego wyboru przed RFQ, a nie jako ostateczne zatwierdzenie.
Użyj tej strony do wstępnej selekcji przed RFQ. Ścieżka dostaw i produkcja na zamówienie MOQ 200+ są potwierdzane po przeglądzie rysunku/specyfikacji/BOM.
Podobne złącza
Mogą Cię też zainteresować te modele:
LCCA30200-FT10
L-com's LCCA30200-FT10 is a low loss 4.3-10 male to 4.3-10 male cable assembly using LMR-400-DB coax, 10 FT with Times Microwave components and ships same-day. The LMR-400-DB coax of this 4.3-10 cable uses the PE (F) dielectric with a VoP of 85%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com 4.3-10 to 4.3-10 cable assembly has a male to male gender configuration with flexible LMR-400-DB series coax and operates to 6 GHz. The double shield of this 4.3-10 cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this 4.3-10 male to 4.3-10 male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30200-FT10 L-com Low Loss 4.3-10 Male to 4.3-10 Male Cable Assembly using LMR-400-DB Coax, 10 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
LCCA30203-FT5
L-com's LCCA30203-FT5 is a low loss N male to N male right angle cable assembly using LMR-400-DB coax, 5 FT with Times Microwave components and ships same-day. The LMR-400-DB coax of this N cable uses the PE (F) dielectric with a VoP of 85%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com N to N cable assembly has a male to male gender configuration with flexible LMR-400-DB series coax and operates to 6 GHz. The double shield of this N cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. This right angle N cable interface on the LMR-400-DB coax allows for easier connections in tight spaces. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N male to N male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30203-FT5 L-com Low Loss N Male to N Male Right Angle Cable Assembly using LMR-400-DB Coax, 5 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
NP-A-QJ
The NP-A-QJ is an N adaptor connector. This connector is suitable for various high-frequency applications. It features a impedance 50Ω, operates up to 8 GHz, and has a rated voltage of AC 500V, ensures a high insulation resistance (1000MΩ(Min.) at DC 500V), a low contact resistance (3 mΩ(Max.), and an excellent V.S.W.R 1.2(Max.) at DC~8GHz. Withstanding temperatures from -40 to +85°C. The contact is made of Beryllium Copper/Gold Plating, while the body is Brass/Ternary Plating. We can customize our products for you. We offer total customization, including changes to a product's shape, length, material, surface treatment, and packaging. Available from 1 piece for in-stock items.
T3376-550
Circular DIN złącza męski gniazdo 5 WAY
550T039M3CCH1-04B
Obudowy tylne D-Sub BANDING SPLIT BS TOP kabel do kabel EMI
LCCA30217-FT1.5
L-com's LCCA30217-FT1.5 is a low loss 7/16 DIN male to 7/16 DIN male cable assembly using LMR-600-DB coax, 1.5 FT with Times Microwave components and ships same-day. The LMR-600-DB coax of this 7/16 DIN cable uses the PE (F) dielectric with a VoP of 87%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com 7/16 DIN to 7/16 DIN cable assembly has a male to male gender configuration with flexible LMR-600-DB series coax and operates to 5.8 GHz. The double shield of this 7/16 DIN cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this 7/16 DIN male to 7/16 DIN male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30217-FT1.5 L-com Low Loss 7/16 DIN Male to 7/16 DIN Male Cable Assembly using LMR-600-DB Coax, 1.5 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
Wyszukiwanie MPN Obsługuje dopasowanie dokładne, prefiksowe i częściowe. ⌄
Zastrzeżenie
Cstone to profesjonalna fabryka, a nie firma handlowa, specjalizująca się w złączach RF i koncentrycznych, adapterach oraz zespołach kablowych, w tym N-type, BNC, SMA, SMP, SSMB i MMCX. Produkujemy złącza według rysunków 2D lub próbek; dopasowanie, MOQ, termin i szczegóły produkcji potwierdzamy w RFQ. Cstone Technology nie jest powiązana z oryginalnymi markami. Nazwy producentów, znaki towarowe, symbole i numery części są używane wyłącznie do identyfikacji i odniesień krzyżowych. Znaki towarowe pozostają własnością ich odpowiednich właścicieli. Ostateczna przydatność jest potwierdzana na podstawie przeglądu rysunku/specyfikacji podczas RFQ.