Butiran produk
7/16 DIN Male to 7/16 DIN Female Adapter, IP67 UnMated
Nombor bahagian (MPN)
Impedans
50 Ohm
Frekuensi
DC
Antara muka
7/16 DIN
pemasangan kabel RF khusus dari lukisan untuk sourcing pengeluaran
pemasangan kabel RF khusus dari lukisan berorientasikan pengeluaran dengan semakan keserasian, panduan MOQ dan sokongan sourcing cost-down.
Apa yang perlu disediakan sebelum RFQ Input yang jelas mengurangkan tekaan dan mempercepatkan jawapan berguna. ⌄
- • Kongsi MPN rujukan, bahagian pasangan atau jenama asal jika penting untuk semakan.
- • Tambah BOM, pembahagian kuantiti dan permintaan tahunan jika projek melebihi jumlah prototaip.
- • Lampirkan lukisan, helaian data atau keperluan kritikal untuk impedans, frekuensi, pemasangan dan penyalutan.
Imej
Klik untuk besarkan.
Specifications
| Antara muka | Adapters |
|---|---|
| Antara muka | 7/16 DIN |
| Antara muka | 7/16 DIN |
| Impedans | 50 Ohm |
| Impedans | 50 Ohm |
| Frekuensi (maks) | DC |
| Frekuensi (maks) | 6 GHz |
| Jantina penyambung | Male |
| Jantina penyambung | Female |
| Adapter Body Style | Straight |
| Connector Body Material 1 | Brass |
| Connector Body Material 2 | Brass |
Show 7 more specs
| Connector Body Plating 1 | Tri-Metal |
|---|---|
| Connector Body Plating 2 | Tri-Metal |
| Connector Polarity 1 | Standard |
| Connector Polarity 2 | Standard |
| Pemasangan | None |
| Pemasangan | None |
| Category | Adapters |
Penerangan
Data rujukan semasa untuk PE91228: 7/16 DIN · 50 Ohm · DC. Impedans disenaraikan sebagai 50 Ohm. Jika parameter ini kritikal, sahkan semula dalam RFQ. Frekuensi disenaraikan sebagai DC. Had operasi sebenar masih bergantung pada pemasangan, bahagian pasangan dan konteks aplikasi. Jika maklumat pemasangan tiada di sini, sahkan daripada lukisan atau keperluan pasangan. Bahan disenaraikan sebagai Brass. Ini membantu semakan, tetapi tidak menggantikan pengesahan struktur projek penuh. Gunakan halaman ini untuk penyaringan sebelum RFQ, bukan sebagai kelulusan akhir.
Gunakan halaman ini untuk menyaring sebelum RFQ. Laluan bekalan dan pengeluaran khusus MOQ 200+ disahkan selepas semakan lukisan/spesifikasi/BOM.
Penyambung serupa
Anda mungkin juga berminat dengan model ini:
L717HDBH44POL2VF
konektor D-Sub densitas tinggi D-SUB, Stamped Signal 3A, tinggi densitas, lurus PCB through-hole, 44 pin, Bright timah Shell+Grounding Dimples, Flash emas, 4-40 Removable Front Screwlock, 4-40 Threaded Rear Nut, tanpa Boardlock
L717DEH09PTRM8
konektor D-Sub standar D-SUB, Machined signal 7.5A, lurus PCB through-hole, Cnt Length=4.0 mm (.157in), Cnt =0.6 mm (.024in), 09 pin, Bright timah Shell+Grounding Dimples, Flash emas, 4-40 Fixed Round Front Screwlock dan Standoff dengan Boardlock
LCCA30219-FT1
L-com's LCCA30219-FT1 is a low loss N male to N male cable assembly using LMR-600-DB coax, 1 FT with Times Microwave components and ships same-day. The LMR-600-DB coax of this N cable uses the PE (F) dielectric with a VoP of 87%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com N to N cable assembly has a male to male gender configuration with flexible LMR-600-DB series coax and operates to 5.8 GHz. The double shield of this N cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N male to N male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30219-FT1 L-com Low Loss N Male to N Male Cable Assembly using LMR-600-DB Coax, 1 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
LCCA30269-FT1.5
L-com's LCCA30269-FT1.5 is a low loss 4.3-10 male to N female bulkhead cable assembly using LMR-240 coax, 1.5 FT with Times Microwave components and ships same-day. The LMR-240 coax of this 4.3-10 cable uses the PE (F) dielectric with a VoP of 84%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com 4.3-10 to N cable assembly has a male to female gender configuration with flexible LMR-240 series coax and operates to 5.8 GHz. The double shield of this 4.3-10 cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. L-com's RF cable assembly with N bulkhead interface enables system designers to have external connections on their product enclosures or to be used for other rack mount and panel mount applications. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this 4.3-10 male to 4.3-10 female cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30269-FT1.5 L-com Low Loss 4.3-10 Male to N Female Bulkhead Cable Assembly using LMR-240 Coax, 1.5 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
SD-50
Circular DIN konektor 3 13 posisi, modular plug, standar Circular DIN konektor
173112-0619
kontak D-Sub FCT TERM HFREQ sudut siku PC receptacle 50 Ω DIN
Carian MPN Menyokong padanan tepat, awalan dan separa. ⌄
Penafian
Cstone ialah kilang profesional, bukan syarikat perdagangan, yang menghasilkan penyambung RF dan koaksial, adapter serta pemasangan kabel termasuk N-type, BNC, SMA, SMP, SSMB dan MMCX. Kami menghasilkan penyambung mengikut lukisan 2D atau sampel; kesesuaian, MOQ, masa penghantaran dan butiran pengeluaran disahkan melalui RFQ. Cstone Technology tidak bergabung dengan jenama asal. Nama pengeluar, tanda dagangan, simbol dan nombor bahagian digunakan untuk pengenalan dan rujukan silang sahaja. Tanda dagangan kekal hak milik pemilik masing-masing. Kesesuaian akhir disahkan melalui semakan lukisan/spesifikasi semasa RFQ.