CSTONE
Senarai RFQ

Butiran produk

7/16 DIN Male to N Female Low PIM Cable Using TFT-402 Coax Using Times Microwave Components

Alternatif serasi dari China — kami sahkan kesesuaian melalui lukisan/spesifikasi anda.

Nombor bahagian (MPN)

PE3C8267

Impedans

50 Ohm

Antara muka

7/16 DIN

pemasangan kabel RF khusus dari lukisan untuk sourcing pengeluaran

pemasangan kabel RF khusus dari lukisan berorientasikan pengeluaran dengan semakan keserasian, panduan MOQ dan sokongan sourcing cost-down.

Kabel RF khusus daripada lukisan →
WhatsApp — Balas Pantas
Tempoh: 3–6 mgg | MOQ: 200+ unit
Apa yang perlu disediakan sebelum RFQ Input yang jelas mengurangkan tekaan dan mempercepatkan jawapan berguna.
  • Kongsi MPN rujukan, bahagian pasangan atau jenama asal jika penting untuk semakan.
  • Tambah BOM, pembahagian kuantiti dan permintaan tahunan jika projek melebihi jumlah prototaip.
  • Lampirkan lukisan, helaian data atau keperluan kritikal untuk impedans, frekuensi, pemasangan dan penyalutan.

Imej

Klik untuk besarkan.

Imej produk

PE3C8267 product photo

PE3C8267 product photo

Specifications

Specifications for PE3C8267
Antara mukaCable Assemblies
Antara mukaTFT-402
Antara muka7/16 DIN
Antara mukaN
Impedans50 Ohm
Impedans50 Ohm
Impedans50 Ohm
Jantina penyambungMale
Jantina penyambungFemale
OrientasiStraight
OrientasiStraight
Connector Polarity 1Standard
Show 5 more specs
PemasanganNone
Connector Polarity 2Standard
PemasanganNone
Jenis kabelTFT-402
CategoryCable Assemblies

Penerangan

Data rujukan semasa untuk PE3C8267: 7/16 DIN · 50 Ohm · Straight. Katalog menyenaraikan konfigurasi sebagai: Straight. Impedans disenaraikan sebagai 50 Ohm. Jika parameter ini kritikal, sahkan semula dalam RFQ. Jika maklumat pemasangan tiada di sini, sahkan daripada lukisan atau keperluan pasangan. Gunakan halaman ini untuk penyaringan sebelum RFQ, bukan sebagai kelulusan akhir.

Gunakan halaman ini untuk menyaring sebelum RFQ. Laluan bekalan dan pengeluaran khusus MOQ 200+ disahkan selepas semakan lukisan/spesifikasi/BOM.

Penyambung serupa

Anda mungkin juga berminat dengan model ini:

LC3MSA00474-36

The L-com LC3MSA00474-36 MIL-STD-1553 flexible RF cable assembly is perfect for applications that need tight bends and flexible cable. This TRB 3-slot to TRB 3-lug cable assembly is plug to jack and made of 78 ohm flexible 30-02003-LC twinax. Our 78 Ohm cable assembly is available with a PVC jacket and a copper inner conductor with silver plating. We offer a blue, 0.8-inch long TRB 3-slot to TRB 3-lug cable that operates at 500 MHz.This blue RF cable assembly is the most commonly utilized cable assembly in wide connectivity applications such as bus couplers, avionics control boxes, and bus relay. L-com's LC3MSA00474-36 MIL-STD-1553 flexible RF cable assembly is available with PE dielectric. Our TRB 3-slot plug to TRB 3-lug jack cable has bayonet coupling connectors made of brass with nickel plating. This RF flexible 30-02003-LC twinax cable operates between -20 and 75 degrees Celsius.L-com has one of the largest in-stock selections of MIL-STD-1553 flexible RF cable assembly with same-day shipment for domestic and international orders. We are a global leader of wired and wireless connectivity products, offering a wide range of solutions across many key industries, including electronics, medical, industrial automation, military, and telecommunication. For further information on similar products, our expert technical support and trained sales team can get you the perfect TRB 3-slot plug to TRB 3-lug jack cable as per your requirements.

Lihat butiran →

LCCA30191-FT4

L-com's LCCA30191-FT4 is a low loss N male to N male cable assembly using LMR-400 coax, 4 FT with Times Microwave components and ships same-day. The LMR-400 coax of this N cable uses the PE (F) dielectric with a VoP of 85%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com N to N cable assembly has a male to male gender configuration with flexible LMR-400 series coax and operates to 6 GHz. The double shield of this N cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N male to N male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30191-FT4 L-com Low Loss N Male to N Male Cable Assembly using LMR-400 Coax, 4 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.

Lihat butiran →

FMCA1766

Low PIM 4.3-10 Female to 7/16 DIN Male Plenum Cable SPP-250-LLPL Coax with LF Solder

Lihat butiran →

T 3475 018

Circular DIN konektor 7 pin male; emas kabel mounting

Lihat butiran →

PE3C8233

4.1/9.5 Mini DIN Male to 7/16 DIN Male Low PIM Cable Using TFT-402 Coax Using Times Microwave Components

Lihat butiran →

LCCA30008-FT3

L-com Cable Assembly LCCA30008 is an N male to N female 3 feet cable using 402SS Series coax that ships same-day. L-com's flexible RF cable assemblies are ideal for applications where tight bends and flexure are required. This L-com N to N cable assembly has a male to female gender configuration with 50 ohm flexible 402SS Series coax and operates to 18 GHz. Highly durable stainless-steel connectors and heavy-duty booting extend the life of this versatile flexible cable assembly. The double shield includes a silver plated copper braid over a silver plated copper spiral strip providing excellent shielding effectiveness greater than 110 dB. Custom versions of this cable assembly along with the rest of L-com's RF cable assemblies can be built and shipped same day. Other available RF cable assembly value added services include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for custom cable quotes.

Lihat butiran →
Carian MPN Menyokong padanan tepat, awalan dan separa.

Menyokong padanan tepat, awalan dan separa.

Penafian

Nama pengeluar, tanda dagangan, simbol dan nombor bahagian digunakan untuk pengenalan dan rujukan silang sahaja. Cstone Technology ialah rakan pembekalan eksport berpangkalan di China untuk alternatif yang serasi dan tidak bergabung dengan jenama asal. Tanda dagangan kekal hak milik pemilik masing-masing. Kesesuaian akhir disahkan melalui semakan lukisan/spesifikasi semasa RFQ.