Butiran produk
Plenum 7/16 DIN Male to 7/16 DIN Male Low PIM Cable Using SPP-250-LLPL Coax Using Times Microwave Parts
Nombor bahagian (MPN)
Impedans
50 Ohm
Antara muka
7/16 DIN
pemasangan kabel RF khusus dari lukisan untuk sourcing pengeluaran
pemasangan kabel RF khusus dari lukisan berorientasikan pengeluaran dengan semakan keserasian, panduan MOQ dan sokongan sourcing cost-down.
Apa yang perlu disediakan sebelum RFQ Input yang jelas mengurangkan tekaan dan mempercepatkan jawapan berguna. ⌄
- • Kongsi MPN rujukan, bahagian pasangan atau jenama asal jika penting untuk semakan.
- • Tambah BOM, pembahagian kuantiti dan permintaan tahunan jika projek melebihi jumlah prototaip.
- • Lampirkan lukisan, helaian data atau keperluan kritikal untuk impedans, frekuensi, pemasangan dan penyalutan.
Imej
Klik untuk besarkan.
Specifications
| Antara muka | Cable Assemblies |
|---|---|
| Antara muka | SPP-250-LLPL |
| Antara muka | 7/16 DIN |
| Antara muka | 7/16 DIN |
| Impedans | 50 Ohm |
| Impedans | 50 Ohm |
| Impedans | 50 Ohm |
| Jantina penyambung | Male |
| Jantina penyambung | Male |
| Orientasi | Straight |
| Orientasi | Straight |
| Connector Polarity 1 | Standard |
Show 5 more specs
| Pemasangan | None |
|---|---|
| Connector Polarity 2 | Standard |
| Pemasangan | None |
| Jenis kabel | SPP-250-LLPL |
| Category | Cable Assemblies |
Penerangan
Data rujukan semasa untuk PE3C6181: 7/16 DIN · 50 Ohm · Straight. Katalog menyenaraikan konfigurasi sebagai: Straight. Impedans disenaraikan sebagai 50 Ohm. Jika parameter ini kritikal, sahkan semula dalam RFQ. Jika maklumat pemasangan tiada di sini, sahkan daripada lukisan atau keperluan pasangan. Gunakan halaman ini untuk penyaringan sebelum RFQ, bukan sebagai kelulusan akhir.
Gunakan halaman ini untuk menyaring sebelum RFQ. Laluan bekalan dan pengeluaran khusus MOQ 200+ disahkan selepas semakan lukisan/spesifikasi/BOM.
Penyambung serupa
Anda mungkin juga berminat dengan model ini:
LC3MSA00604-12
The L-com LC3MSA00604-12 MIL-STD-1553 flexible RF cable assembly is perfect for applications that need tight bends and flexible cable. This TRB 2-slot to blunt cut cable assembly is plug to blunt cut and made of 78 ohm flexible TWCH-78-2-LC twinax. Our 78 Ohm cable assembly is available with a HF POF jacket and a copper inner conductor with silver plating. We offer a blue, 0.57-inch OD TRB 2-slot to blunt cut cable that operates at 500 MHz.This blue RF cable assembly is the most commonly utilized cable assembly in wide connectivity applications such as bus couplers, avionics control boxes, and bus relay. L-com's LC3MSA00604-12 MIL-STD-1553 flexible RF cable assembly is available with PE dielectric. Our TRB 2-slot plug to blunt cut cable has bayonet coupling connectors made of brass with nickel plating. This RF flexible TWCH-78-2-LC twinax cable operates between -30 and 80 degrees Celsius.L-com has one of the largest in-stock selections of MIL-STD-1553 flexible RF cable assembly with same-day shipment for domestic and international orders. We are a global leader of wired and wireless connectivity products, offering a wide range of solutions across many key industries, including electronics, medical, industrial automation, military, and telecommunication. For further information on similar products, our expert technical support and trained sales team can get you the perfect TRB 2-slot plug to blunt cut cable as per your requirements.
C091 31W004 100 2
Circular DIN konektor male receptacle 4 pin; Front MT
CA-DMDMF100
High quality fully tested 7/16 DIN Male to 7/16 DIN Male cable assemblies featuring high performance 400-Series coax cable. These lightweight cables have excellent low loss characteristics. Not exactly what you are looking for? Build your own cable assembly with our Custom Product Configurator.
630-0600
DIN konektor soket nikel 6 pin
LCCA30179-FT6
L-com's LCCA30179-FT6 is a low loss 4.3-10 male to 4.3-10 male cable assembly using LMR-240-DB coax, 6 FT with Times Microwave components and ships same-day. The LMR-240-DB coax of this 4.3-10 cable uses the PE (F) dielectric with a VoP of 84%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com 4.3-10 to 4.3-10 cable assembly has a male to male gender configuration with flexible LMR-240-DB series coax and operates to 5.8 GHz. The double shield of this 4.3-10 cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this 4.3-10 male to 4.3-10 male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30179-FT6 L-com Low Loss 4.3-10 Male to 4.3-10 Male Cable Assembly using LMR-240-DB Coax, 6 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
2081556-1
adaptor RF - In seri 7-16 DIN male to7-16 DIN female Low PIM
Carian MPN Menyokong padanan tepat, awalan dan separa. ⌄
Penafian
Nama pengeluar, tanda dagangan, simbol dan nombor bahagian digunakan untuk pengenalan dan rujukan silang sahaja. Cstone Technology ialah rakan pembekalan eksport berpangkalan di China untuk alternatif yang serasi dan tidak bergabung dengan jenama asal. Tanda dagangan kekal hak milik pemilik masing-masing. Kesesuaian akhir disahkan melalui semakan lukisan/spesifikasi semasa RFQ.