Butiran produk
L-com's LCCA30337-FT3 is a low loss 7/16 DIN male to N female bulkhead cable assembly using LMR-600 coax, 3 FT with Times Microwave components and ships same-day. The LMR-600 coax of this 7/16 DIN cable uses the PE (F) dielectric with a VoP of 87%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com 7/16 DIN to N cable assembly has a male to female gender configuration with flexible LMR-600 series coax and operates to 5.8 GHz. The double shield of this 7/16 DIN cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. L-com's RF cable assembly with N bulkhead interface enables system designers to have external connections on their product enclosures or to be used for other rack mount and panel mount applications. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this 7/16 DIN male to 7/16 DIN female cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30337-FT3 L-com Low Loss 7/16 DIN Male to N Female Bulkhead Cable Assembly using LMR-600 Coax, 3 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
Nombor bahagian (MPN)
Impedans
50 Ohm
Antara muka
7/16 DIN
pemasangan kabel RF khusus dari lukisan untuk sourcing pengeluaran
pemasangan kabel RF khusus dari lukisan berorientasikan pengeluaran dengan semakan keserasian, panduan MOQ dan sokongan sourcing cost-down.
Apa yang perlu disediakan sebelum RFQ Input yang jelas mengurangkan tekaan dan mempercepatkan jawapan berguna. ⌄
- • Kongsi MPN rujukan, bahagian pasangan atau jenama asal jika penting untuk semakan.
- • Tambah BOM, pembahagian kuantiti dan permintaan tahunan jika projek melebihi jumlah prototaip.
- • Lampirkan lukisan, helaian data atau keperluan kritikal untuk impedans, frekuensi, pemasangan dan penyalutan.
Imej
Klik untuk besarkan.
Specifications
| Antara muka | Coaxial Cable Assemblies |
|---|---|
| Antara muka | LMR-600 |
| Antara muka | 7/16 DIN |
| Antara muka | N |
| Impedans | 50 Ohm |
| Impedans | 50 Ohm |
| Impedans | 50 Ohm |
| Jantina penyambung | Male |
| Jantina penyambung | Female |
| Orientasi | Straight |
| Orientasi | Straight |
| Connector 1 Body Material | Brass |
Show 6 more specs
| Connector 1 Body Plating | Tri-Metal |
|---|---|
| Connector 1 Polarity | Standard |
| Connector 2 Polarity | Standard |
| Pemasangan | Bulkhead |
| Jenis kabel | LMR-600 |
| Category | Coaxial Cable Assemblies |
Penerangan
Data rujukan semasa untuk LCCA30337-FT3: 7/16 DIN · 50 Ohm · Bulkhead. Katalog menyenaraikan konfigurasi sebagai: Straight. Impedans disenaraikan sebagai 50 Ohm. Jika parameter ini kritikal, sahkan semula dalam RFQ. Pemasangan disenaraikan sebagai Bulkhead. Jika had panel, pemasangan tembus panel atau bebibir penting, hantar dimensi bersama RFQ. Bahan disenaraikan sebagai Brass. Ini membantu semakan, tetapi tidak menggantikan pengesahan struktur projek penuh. Gunakan halaman ini untuk penyaringan sebelum RFQ, bukan sebagai kelulusan akhir.
Gunakan halaman ini untuk menyaring sebelum RFQ. Laluan bekalan dan pengeluaran khusus MOQ 200+ disahkan selepas semakan lukisan/spesifikasi/BOM.
Penyambung serupa
Anda mungkin juga berminat dengan model ini:
22510365
Our standard PE coax cables consist of single or double shielding with a range of 50 and 75 ohm to deliver high-quality performance along with highly-efficient insertion loss.
L777SDB25P1ACO4F
konektor D-Sub standar D-SUB, Stamped Signal 3A, sudut siku PCB through-hole, FP=10.40 mm (.409in), Row Pitch 2.54 mm, 25 pin, 0.38 m (15 in) emas, Bright timah Shell+Grounding Dimples, 4-40 Front Screwlock, Ground Tab dengan Clear Hole tanpa Boardlock
LCCA30193-FT1.5
L-com's LCCA30193-FT1.5 is a low loss N female to N male cable assembly using LMR-400 coax, 1.5 FT with Times Microwave components and ships same-day. The LMR-400 coax of this N cable uses the PE (F) dielectric with a VoP of 85%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com N to N cable assembly has a female to male gender configuration with flexible LMR-400 series coax and operates to 6 GHz. The double shield of this N cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N female to N male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30193-FT1.5 L-com Low Loss N Female to N Male Cable Assembly using LMR-400 Coax, 1.5 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
LCCA30203-FT1
L-com's LCCA30203-FT1 is a low loss N male to N male right angle cable assembly using LMR-400-DB coax, 1 FT with Times Microwave components and ships same-day. The LMR-400-DB coax of this N cable uses the PE (F) dielectric with a VoP of 85%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com N to N cable assembly has a male to male gender configuration with flexible LMR-400-DB series coax and operates to 6 GHz. The double shield of this N cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. This right angle N cable interface on the LMR-400-DB coax allows for easier connections in tight spaces. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N male to N male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30203-FT1 L-com Low Loss N Male to N Male Right Angle Cable Assembly using LMR-400-DB Coax, 1 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
MD-40SG
DIN konektor mini-DIN, 4P jack, rt, through-hole, full pelindung
LC3MSA00476-12
The L-com LC3MSA00476-12 MIL-STD-1553 flexible RF cable assembly is perfect for applications that need tight bends and flexible cable. This TRB 3-slot to blunt cut cable assembly is plug to blunt cut and made of 78 ohm flexible 30-02003-LC twinax. Our 78 Ohm cable assembly is available with a PVC jacket and a copper inner conductor with silver plating. We offer a blue, 0.57-inch OD TRB 3-slot to blunt cut cable that operates at 500 MHz.This blue RF cable assembly is the most commonly utilized cable assembly in wide connectivity applications such as bus couplers, avionics control boxes, and bus relay. L-com's LC3MSA00476-12 MIL-STD-1553 flexible RF cable assembly is available with PE dielectric. Our TRB 3-slot plug to blunt cut cable has bayonet coupling connectors made of brass with nickel plating. This RF flexible 30-02003-LC twinax cable operates between -20 and 75 degrees Celsius.L-com has one of the largest in-stock selections of MIL-STD-1553 flexible RF cable assembly with same-day shipment for domestic and international orders. We are a global leader of wired and wireless connectivity products, offering a wide range of solutions across many key industries, including electronics, medical, industrial automation, military, and telecommunication. For further information on similar products, our expert technical support and trained sales team can get you the perfect TRB 3-slot plug to blunt cut cable as per your requirements.
Carian MPN Menyokong padanan tepat, awalan dan separa. ⌄
Penafian
Cstone ialah kilang profesional, bukan syarikat perdagangan, yang menghasilkan penyambung RF dan koaksial, adapter serta pemasangan kabel termasuk N-type, BNC, SMA, SMP, SSMB dan MMCX. Kami menghasilkan penyambung mengikut lukisan 2D atau sampel; kesesuaian, MOQ, masa penghantaran dan butiran pengeluaran disahkan melalui RFQ. Cstone Technology tidak bergabung dengan jenama asal. Nama pengeluar, tanda dagangan, simbol dan nombor bahagian digunakan untuk pengenalan dan rujukan silang sahaja. Tanda dagangan kekal hak milik pemilik masing-masing. Kesesuaian akhir disahkan melalui semakan lukisan/spesifikasi semasa RFQ.