Butiran produk
TRB 2-Slot Straight Plug 78 Ohm
Nombor bahagian (MPN)
Impedans
78 Ohm
Antara muka
TRB 2-Slot
pemasangan kabel RF khusus dari lukisan untuk sourcing pengeluaran
pemasangan kabel RF khusus dari lukisan berorientasikan pengeluaran dengan semakan keserasian, panduan MOQ dan sokongan sourcing cost-down.
Apa yang perlu disediakan sebelum RFQ Input yang jelas mengurangkan tekaan dan mempercepatkan jawapan berguna. ⌄
- • Kongsi MPN rujukan, bahagian pasangan atau jenama asal jika penting untuk semakan.
- • Tambah BOM, pembahagian kuantiti dan permintaan tahunan jika projek melebihi jumlah prototaip.
- • Lampirkan lukisan, helaian data atau keperluan kritikal untuk impedans, frekuensi, pemasangan dan penyalutan.
Imej
Klik untuk besarkan.
Specifications
| Antara muka | Coaxial Cable Assemblies |
|---|---|
| Antara muka | TWCH-78-2-LC |
| Antara muka | TRB 2-Slot |
| Antara muka | Blunt Cut |
| Impedans | 78 Ohm |
| Impedans | 78 Ohm |
| Jantina penyambung | Plug |
| Jantina penyambung | Hermaphroditic |
| Orientasi | Straight |
| Orientasi | Straight |
| Connector 1 Body Material | Brass |
| Connector 1 Body Plating | Nickel |
Show 5 more specs
| Connector 1 Polarity | Standard |
|---|---|
| Connector 2 Polarity | Standard |
| Jenis kabel | TWCH-78-2-LC |
| Length, Max | 48 inches |
| Category | Coaxial Cable Assemblies |
Penerangan
Data rujukan semasa untuk LC3MSA00604-48: TRB 2-Slot · 78 Ohm · Straight. Katalog menyenaraikan konfigurasi sebagai: Straight. Impedans disenaraikan sebagai 78 Ohm. Jika parameter ini kritikal, sahkan semula dalam RFQ. Jika maklumat pemasangan tiada di sini, sahkan daripada lukisan atau keperluan pasangan. Bahan disenaraikan sebagai Brass. Ini membantu semakan, tetapi tidak menggantikan pengesahan struktur projek penuh. Gunakan halaman ini untuk penyaringan sebelum RFQ, bukan sebagai kelulusan akhir.
Gunakan halaman ini untuk menyaring sebelum RFQ. Laluan bekalan dan pengeluaran khusus MOQ 200+ disahkan selepas semakan lukisan/spesifikasi/BOM.
Penyambung serupa
Anda mungkin juga berminat dengan model ini:
LMR-LW600-LC-FT
LMR-LW600-LC-FT coax cable from L-com is only one of a large number of radio frequency coaxial cable types specifically stocked to be ready for quick shipment. L-com LMR-LW600-LC-FT coax cable is manufactured in a flexible design and has a 50 Ohm impedance. This low loss flexible 50 Ohm coax cable LMR-LW600-LC-FT is constructed with a 0.590 inch diameter and Black PE jacket. LMR-LW600-LC-FT flexible 50 Ohm coax cable with PVC jacket is rated for a 5.8GHz maximum operating frequency. This 50 Ohm 0.590 inch diameter and low loss flexible coax cable is built with a double shield count and RF shielding of 90 dB. L-com LMR-LW600-LC-FT coax is constructed with Foam PE dielectric and a maximum operating temperature of +85 degrees C. Times Microwave LMR-LW600-LC-FT coax cable specs for this wire properties can be found on its RF coax cable LMR-LW600-LC-FT datasheet. LMR-LW600-LC-FT cable is part of more than one million RF, microwave parts in stock at L-com. This Times Microwave low loss LMR-LW600-LC-FT coax cable is ready to buy and can be shipped worldwide. L-com also maintains a wide selection of other radio frequency coaxial cable types that ship same-day from our warehouse as with the rest of our other RF/microwave components. * LMR™ is a trademark of Times Microwave Systems.
C091 31H007 100 5 U
Circular DIN konektor male kabel konektor, Quicklock, ukuran M16, 7 kontak, perak kontak Plating, 7A Arrangement, kabel Diameter 4-8.5 mm,
557E113M316B
backshell D-Sub SOLID BANDING BKSHLL END BAND SUPPLIED
PE3C6512
Outdoor Rated 4.3-10 Male to 7/16 DIN Male Low PIM Cable Using SPO-500 Coax Using Times Microwave Parts
LCCA30192-FT1.5
L-com's LCCA30192-FT1.5 is a low loss N male right angle to N male cable assembly using LMR-400 coax, 1.5 FT with Times Microwave components and ships same-day. The LMR-400 coax of this N cable uses the PE (F) dielectric with a VoP of 85%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com N to N cable assembly has a male to male gender configuration with flexible LMR-400 series coax and operates to 6 GHz. The double shield of this N cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. This right angle N cable interface on the LMR-400 coax allows for easier connections in tight spaces. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N male to N male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30192-FT1.5 L-com Low Loss N Male Right Angle to N Male Cable Assembly using LMR-400 Coax, 1.5 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
85259449
MICROBEND features include 35 % lower loss than 0.047-inch semi-rigid cable, a minimum bend radius of 1.52 mm (0.060 inch) and triple shielding for high isolation. MICROBEND assemblies are available with a wide range of connector interfaces.
Carian MPN Menyokong padanan tepat, awalan dan separa. ⌄
Penafian
Cstone ialah kilang profesional, bukan syarikat perdagangan, yang menghasilkan penyambung RF dan koaksial, adapter serta pemasangan kabel termasuk N-type, BNC, SMA, SMP, SSMB dan MMCX. Kami menghasilkan penyambung mengikut lukisan 2D atau sampel; kesesuaian, MOQ, masa penghantaran dan butiran pengeluaran disahkan melalui RFQ. Cstone Technology tidak bergabung dengan jenama asal. Nama pengeluar, tanda dagangan, simbol dan nombor bahagian digunakan untuk pengenalan dan rujukan silang sahaja. Tanda dagangan kekal hak milik pemilik masing-masing. Kesesuaian akhir disahkan melalui semakan lukisan/spesifikasi semasa RFQ.