Butiran produk
TRB 3-Slot Straight Plug Bulkhead 78 Ohm
Nombor bahagian (MPN)
Impedans
78 Ohm
Antara muka
TRB 3-Slot
pemasangan kabel RF khusus dari lukisan untuk sourcing pengeluaran
pemasangan kabel RF khusus dari lukisan berorientasikan pengeluaran dengan semakan keserasian, panduan MOQ dan sokongan sourcing cost-down.
Apa yang perlu disediakan sebelum RFQ Input yang jelas mengurangkan tekaan dan mempercepatkan jawapan berguna. ⌄
- • Kongsi MPN rujukan, bahagian pasangan atau jenama asal jika penting untuk semakan.
- • Tambah BOM, pembahagian kuantiti dan permintaan tahunan jika projek melebihi jumlah prototaip.
- • Lampirkan lukisan, helaian data atau keperluan kritikal untuk impedans, frekuensi, pemasangan dan penyalutan.
Imej
Klik untuk besarkan.
Specifications
| Antara muka | Coaxial Cable Assemblies |
|---|---|
| Antara muka | 30-02001-LC |
| Antara muka | TRB 3-Slot |
| Antara muka | TRB 3-Lug |
| Impedans | 78 Ohm |
| Impedans | 78 Ohm |
| Impedans | 78 Ohm |
| Jantina penyambung | Plug |
| Jantina penyambung | Jack |
| Orientasi | Straight |
| Orientasi | Straight |
| Connector 1 Body Material | Brass |
Show 7 more specs
| Connector 1 Body Plating | Nickel |
|---|---|
| Connector 1 Polarity | Standard |
| Connector 2 Polarity | Standard |
| Pemasangan | Bulkhead |
| Jenis kabel | 30-02001-LC |
| Length, Max | 12 inches |
| Category | Coaxial Cable Assemblies |
Penerangan
Data rujukan semasa untuk LC3MP2268-12: TRB 3-Slot · 78 Ohm · Bulkhead. Katalog menyenaraikan konfigurasi sebagai: Straight. Impedans disenaraikan sebagai 78 Ohm. Jika parameter ini kritikal, sahkan semula dalam RFQ. Pemasangan disenaraikan sebagai Bulkhead. Jika had panel, pemasangan tembus panel atau bebibir penting, hantar dimensi bersama RFQ. Bahan disenaraikan sebagai Brass. Ini membantu semakan, tetapi tidak menggantikan pengesahan struktur projek penuh. Gunakan halaman ini untuk penyaringan sebelum RFQ, bukan sebagai kelulusan akhir.
Gunakan halaman ini untuk menyaring sebelum RFQ. Laluan bekalan dan pengeluaran khusus MOQ 200+ disahkan selepas semakan lukisan/spesifikasi/BOM.
Penyambung serupa
Anda mungkin juga berminat dengan model ini:
173112-0611
kontak D-Sub FCT TERM HFREQ sudut siku PC receptacle 50 Ω DIN
PE3C7744
Plenum 7/16 DIN Female to N Male Low PIM Cable Using SPP-375-LLPL Coax with Times Microwave Components
LCCA30191-FT6
L-com's LCCA30191-FT6 is a low loss N male to N male cable assembly using LMR-400 coax, 6 FT with Times Microwave components and ships same-day. The LMR-400 coax of this N cable uses the PE (F) dielectric with a VoP of 85%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com N to N cable assembly has a male to male gender configuration with flexible LMR-400 series coax and operates to 6 GHz. The double shield of this N cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N male to N male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30191-FT6 L-com Low Loss N Male to N Male Cable Assembly using LMR-400 Coax, 6 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
L717SDEG09POL2VFM
konektor D-Sub standar D-SUB, Stamped Signal 3A, lurus PCB through-hole, Back Insulator Plus Back Shell Height 6.0 mm, 9 pin, Flash emas, Bright timah Shell+Grounding Dimples, M3 Removable Front Screwlock, tanpa Standoff dan Boardlock
NCA-PJ-6
The NCA-PJ-6 is an N75Ω Attenuator. This connector is suitable for various high-frequency applications. It features a impedance 75Ω, operates up to 2 GHz, and an excellent V.S.W.R 1.2(Max.) at DC~2GHz. The contact is made of Brass/Phosphor Bronze/Gold Plating, while the body is Brass/Nickel Plating. Rated Power is 1W.Attenuation is 6±0.8dB up to 2GHz. We can customize our products for you. We offer total customization, including changes to a product's shape, length, material, surface treatment, and packaging.
557B071NF332
backshell D-Sub SOLID BANDING BKSHLL 45DEG
Carian MPN Menyokong padanan tepat, awalan dan separa. ⌄
Penafian
Nama pengeluar, tanda dagangan, simbol dan nombor bahagian digunakan untuk pengenalan dan rujukan silang sahaja. Cstone Technology ialah rakan pembekalan eksport berpangkalan di China untuk alternatif yang serasi dan tidak bergabung dengan jenama asal. Tanda dagangan kekal hak milik pemilik masing-masing. Kesesuaian akhir disahkan melalui semakan lukisan/spesifikasi semasa RFQ.