Butiran produk
SMA sudut siku crimp jack RG-174 RG-188 RG-316 Times LMR-100A Bulkhead 50 Ω
Nombor bahagian (MPN)
Impedans
50
Frekuensi
12.4
pemasangan kabel RF khusus dari lukisan untuk sourcing pengeluaran
pemasangan kabel RF khusus dari lukisan berorientasikan pengeluaran dengan semakan keserasian, panduan MOQ dan sokongan sourcing cost-down.
Apa yang perlu disediakan sebelum RFQ Input yang jelas mengurangkan tekaan dan mempercepatkan jawapan berguna. ⌄
- • Kongsi MPN rujukan, bahagian pasangan atau jenama asal jika penting untuk semakan.
- • Tambah BOM, pembahagian kuantiti dan permintaan tahunan jika projek melebihi jumlah prototaip.
- • Lampirkan lukisan, helaian data atau keperluan kritikal untuk impedans, frekuensi, pemasangan dan penyalutan.
Imej
Klik untuk besarkan.
Specifications
| Antara muka | RG-174, RG-188, RG-316, Times LMR-100A, Belden 7805A, Belden 8216, Belden 83269, Belden 83284, Belden 84316, Times RG-174LL, Shikoku 1.5DS-QFB-TA, Sumitomo 1.5DS-GXC-SP, Leoni DACAR 462, Leoni DACAR 462-2 |
|---|---|
| Frekuensi (maks) | 12.4 |
| Jantina penyambung | Jack |
| Pemasangan | Bulkhead - Rear mounting |
| Finishing bodi | Emas |
| Material bodi | Kuningan |
| Finishing kontak | Emas |
| Material kontak | Tembaga berilium |
| Terminasi kontak | Solder |
| Mekanisme penggandingan | Threaded |
| Penamatan | 47-10150 |
| Export Control Classification Number item | EAR99 |
Show 14 more specs
| Penarafan IP | Not Rated |
|---|---|
| Impedans | 50 |
| Material isolator | PTFE |
| Terisolasi | Tidak |
| Low PIM | Tidak |
| Mil Qualified item | Tidak bersertifikasi MIL |
| Non-magnetik | Tidak |
| Orientasi | Sudut siku |
| Ports item | 1 (Single Port) |
| Size Category item | Subminiature |
| Temp (Max Degrees Celsius) item | 165 |
| Temp (Min Degrees Celsius) item | -65 |
| Gaya terminasi | kabel - crimp |
| Arah ulir | standar |
Penerangan
Data rujukan semasa untuk 132245: 50 · 12.4 · Bulkhead - Rear mounting. Katalog menyenaraikan konfigurasi sebagai: 47-10150. Impedans disenaraikan sebagai 50. Jika parameter ini kritikal, sahkan semula dalam RFQ. Frekuensi disenaraikan sebagai 12.4. Had operasi sebenar masih bergantung pada pemasangan, bahagian pasangan dan konteks aplikasi. Untuk projek frekuensi tinggi, sertakan lukisan, laluan kabel dan keperluan kritikal dalam RFQ pertama. Pemasangan disenaraikan sebagai Bulkhead - Rear mounting. Jika had panel, pemasangan tembus panel atau bebibir penting, hantar dimensi bersama RFQ. Bahan disenaraikan sebagai Kuningan. Ini membantu semakan, tetapi tidak menggantikan pengesahan struktur projek penuh. Katalog juga menyenaraikan nilai pengedapan atau perlindungan Not Rated. Semak dengan keperluan persekitaran sebenar dalam RFQ. Gunakan halaman ini untuk penyaringan sebelum RFQ, bukan sebagai kelulusan akhir.
Gunakan halaman ini untuk menyaring sebelum RFQ. Laluan bekalan dan pengeluaran khusus MOQ 200+ disahkan selepas semakan lukisan/spesifikasi/BOM.
Penyambung serupa
Anda mungkin juga berminat dengan model ini:
RFPCB-SMA-FS18G-54
RFPCB-SMA-FS18G-54 SMA female PCB connector available from L-com has a 50 Ohm impedance. This RF connector has an edge mount connector mount interface and is designed for a wide variety of Printed-Circuit Board (PCB) applications in RF and microwave systems. This SMA female connector uses solder as an attachment method. Our SMA female PCB connector provides a minimum frequency of DC and a maximum frequency of 18 GHz. The SMA connector is available in a 0.52-inch length and 0.32-inch width. The L-com SMA female PCB connector has a PTFE dielectric type and a VSWR of 1.2:1. This SMA PCB connector has a brass body with gold plating. Our RFPCB-SMA-FS18G-54 SMA connector uses beryllium copper alloy contacts and gold plating material. This SMA female PCB radio frequency connector is RoHS and REACH compliant. This L-com SMA female connector will ship the same day as purchased. Our SMA female connector is part of over 40,000 RF, microwave, and millimeter wave components in stock for worldwide shipment. We also build SMA custom connector cable assemblies that will ship the same day as well. The SMA female connector with 50 Ohm impedance has a weight of 0.005445 lbs. This RF connector has a high-quality construction. The female coaxial connector is capable of operating at temperatures ranging from -55 deg C to 125 deg C. We currently have a variety of antenna, audio/video, Ethernet, fiber optic, and USB connectors in our portfolio that are ready to ship today. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the high-quality RF that meets your requirements.
LCCA30224-FT4
L-com's LCCA30224-FT4 is a low loss SMA male to TNC male cable assembly using LMR-100 coax, 4 FT with Times Microwave components and ships same-day. The LMR-100A-PVC coax of this SMA cable uses the PE dielectric with a VoP of 66%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com SMA to TNC cable assembly has a male to male gender configuration with flexible LMR-100A-PVC series coax and operates to 5.8 GHz. The double shield of this SMA cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this SMA male to SMA male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30224-FT4 L-com Low Loss SMA Male to TNC Male Cable Assembly using LMR-100 Coax, 4 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
Bundled (4-core) OM4 FC-MU
This product is an optical fiber cable pre-terminated with optical connectors. The standard cable color varies depending on the fiber mode. This is a bundled cable (4-core), multimode (OM4), with FC-MU connectors.Example model: TFC-4C-OM4-FC-MU-1m-CYou can select the fiber count (1-core/2-core/4-core), mode (single-mode (SM) / multimode (OM1–OM5), and connector type (SC/LC/ST/FC/MU/SMA905), and specify the overall length. Please refer to the specifications.Delivery is typically 2 to 5 weeks after order placement. Please contact us for details.
ADT-2542-7M-SMM-02
adaptor RF - antar seri adaptor X / M 7 mm / SMA 18 GHz
PE45584
SMA Female Field Replaceable Connector 2 Hole Flange Mount 0.009 inch Pin, .481 inch Hole Spacing, with Metal Contact Ring
A90MC80-141T-
SMA polaritas terbalik jack ke SMC jack using .141 semi-rigid
Carian MPN Menyokong padanan tepat, awalan dan separa. ⌄
Penafian
Cstone ialah kilang profesional, bukan syarikat perdagangan, yang menghasilkan penyambung RF dan koaksial, adapter serta pemasangan kabel termasuk N-type, BNC, SMA, SMP, SSMB dan MMCX. Kami menghasilkan penyambung mengikut lukisan 2D atau sampel; kesesuaian, MOQ, masa penghantaran dan butiran pengeluaran disahkan melalui RFQ. Cstone Technology tidak bergabung dengan jenama asal. Nama pengeluar, tanda dagangan, simbol dan nombor bahagian digunakan untuk pengenalan dan rujukan silang sahaja. Tanda dagangan kekal hak milik pemilik masing-masing. Kesesuaian akhir disahkan melalui semakan lukisan/spesifikasi semasa RFQ.