제품 상세
SMA Male to TNC Female Bulkhead Low Loss Cable Using LMR-195 Coax
품번 (MPN)
임피던스
50 Ohm
인터페이스
SMA
도면 기반 맞춤 RF 케이블 어셈블리 생산 소싱
호환성 검토, MOQ 안내, 원가 절감 소싱 지원을 포함한 생산 중심 도면 기반 맞춤 RF 케이블 어셈블리.
RFQ 전에 준비할 사항 명확한 입력은 추측을 줄이고 유용한 답변을 앞당깁니다. ⌄
- • 검토에 중요하다면 참조 MPN, 결합 부품 또는 원 브랜드를 공유해 주세요.
- • 프로젝트가 시제품 수량을 넘는다면 BOM, 수량 구분, 연간 수요를 추가해 주세요.
- • 도면, 데이터 시트 또는 임피던스, 주파수, 장착, 도금에 관한 핵심 요구사항을 첨부해 주세요.
이미지
클릭하여 확대
Specifications
| 인터페이스 | Cable Assemblies |
|---|---|
| 인터페이스 | LMR-195 |
| 인터페이스 | SMA |
| 인터페이스 | TNC |
| 임피던스 | 50 Ohm |
| 임피던스 | 50 Ohm |
| 임피던스 | 50 Ohm |
| 젠더 | Male |
| 젠더 | Female |
| 방향 | Straight |
| 방향 | Straight |
| Connector 1 Body Material | Brass |
Show 6 more specs
| Connector 1 Body Plating | Nickel |
|---|---|
| Connector 1 Polarity | Standard |
| Connector 2 Polarity | Standard |
| 장착 방식 | Bulkhead |
| 케이블 유형 | LMR-195 |
| Category | Cable Assemblies |
설명
PE3W09288의 현재 참조 데이터: SMA · 50 Ohm · Bulkhead. 카탈로그에는 구성이 Straight로 표시되어 있습니다. 임피던스는 50 Ohm로 표시되어 있습니다. 중요한 매개변수라면 RFQ에서 다시 확인하세요. 장착 방식은 Bulkhead로 표시되어 있습니다. 패널, 관통 장착 또는 플랜지 제약이 중요하면 RFQ와 함께 치수를 보내주세요. 재질은 Brass로 표시되어 있습니다. 검토에는 도움이 되지만 전체 프로젝트 구조 확인을 대신하지는 않습니다. 이 페이지는 RFQ 전 후보 선정을 위한 것이며 최종 승인 근거가 아닙니다.
RFQ 전에 이 페이지에서 후보를 추리세요. 도면/사양/BOM 검토 후 MOQ 200+ 공급 경로와 맞춤 생산 루트가 확정됩니다.
유사 커넥터
다음 모델도 함께 확인해 보세요:
PE36161LF
7/16 DIN Male to SMA Male Cable Using RG223 Coax , LF Solder
LCCA30012-FT1
L-com low loss SMA male to SMA male right angle cable assembly with heavy duty heat shrink boot using LL142 coax, 1 FT is available for same day shipping from our facility. This high quality SMA cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30012-FT1 SMA cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF low loss coaxial cable assemblies are built with SMA connection on one end and right angle SMA connection on the other. This low loss SMA to right angle SMA cable from L-com has a male to male gender combination. Our SMA male to SMA male coaxial assembly part number LCCA30012-FT1 can also be known as low loss SMA plug to right angle SMA plug cable assembly when using alternate gender names. SMA plug to SMA plug cable assembly LCCA30012-FT1 is manufactured with a flexible coax. These flexible SMA to SMA cable assemblies use LL142 coax and are triple shielded. L-com triple shielded low loss SMA male to SMA male right angle cable assembly with heavy duty heat shrink boot using LL142 coax, 1 FT is built from quality components by skilled assemblers with many years of experience.Maximum frequency for these SMA to SMA M/M cables is 18 GHz. Technical performance specifications on these 18 GHz SMA male to SMA right angle male cables are located on the LCCA30012-FT1 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a low loss right angle SMA male to SMA male cable assembly because it can be used in the opposite direction.Low loss SMA male to SMA male right angle cable assembly with heavy duty heat shrink boot using LL142 coax, 1 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our SMA to right angle SMA cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our low loss SMA male to SMA male right angle cable assembly with heavy duty heat shrink boot using LL142 coax, 1 FT.
LCCA30561-FT5
L-com precision SMA male right angle to TNC female bulkhead semi-flexible cable assembly using LC085TB coax, 5 FT , LF solder is available for same day shipping from our facility. This high quality SMA cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30561-FT5 SMA cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF precision coaxial cable assemblies are built with right angle SMA connection on one end and TNC bulkhead connection on the other. This precisionright angle SMA to TNC cable from L-com has a male to female gender combination. Our SMA male to TNC female coaxial assembly part number LCCA30561-FT5 can also be known as precision right angle SMA plug to TNC jack cable assembly when using alternate gender names. SMA plug to TNC jack cable assembly LCCA30561-FT5 is manufactured with a formable coax. These formable SMA to TNC cable assemblies use LC085TB coax and are single shielded. L-com single shielded precision SMA male right angle to TNC female bulkhead semi-flexible cable assembly using LC085TB coax, 5 FT , LF solder is built from quality components by skilled assemblers with many years of experience.Maximum frequency for these SMA to TNC M/F cables is 6 GHz. Technical performance specifications on these 6 GHz SMA right angle male to TNC female bulkhead cables are located on the LCCA30561-FT5 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a precision TNC female bulkhead to right angle SMA male cable assembly because it can be used in the opposite direction.Precision SMA male right angle to TNC female bulkhead semi-flexible cable assembly using LC085TB coax, 5 FT , LF solder is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our right angle SMA to TNC cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our precision SMA male right angle to TNC female bulkhead semi-flexible cable assembly using LC085TB coax, 5 FT , LF solder.
2-core (Zipcord) OM2 SMA905-OPEN
This product is an optical fiber cable pre-terminated with optical connectors. The standard cable color varies depending on the fiber mode. This is a 2-core (Zipcord) cable, multimode (OM2), with SMA905-OPEN connectors.Example model: TFC-2C-OM2-SMA-OPEN-1mYou can select the fiber count (1-core/2-core/4-core), mode (single-mode (SM) / multimode (OM1–OM5), and connector type (SC/LC/ST/FC/MU/SMA905), and specify the overall length. Please refer to the specifications.Delivery is typically 2 to 5 weeks after order placement. Please contact us for details.
LCCA30114-FT10
L-com SMA male to SMA female cable assembly using LC085TB coax, 10 FT is available for same day shipping from our facility. This high quality SMA cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30114-FT10 SMA cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF coaxial cable assemblies are built with SMA connection on one end and SMA connection on the other. This SMA to SMA cable from L-com has a male to female gender combination. Our SMA male to SMA female coaxial assembly part number LCCA30114-FT10 can also be known as SMA plug to SMA jack cable assembly when using alternate gender names. SMA plug to SMA jack cable assembly LCCA30114-FT10 is manufactured with a formable coax.Maximum frequency for these SMA to SMA M/F cables is 18 GHz. Technical performance specifications on these 18 GHz SMA male to SMA female cables are located on the LCCA30114-FT10 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a SMA female to SMA male cable assembly because it can be used in the opposite direction.SMA male to SMA female cable assembly using LC085TB coax, 10 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our SMA to SMA cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our SMA male to SMA female cable assembly using LC085TB coax, 10 FT.
A30A95-316D-
SMA 플러그 까지 SMA 역극성 극성 잭 bulkhead IP67mated using RD316
면책 조항
제조사 이름, 상표, 기호 및 부품 번호는 식별 및 상호 참조 목적으로만 사용됩니다. Cstone Technology는 호환 가능한 대안을 위한 중국 기반 수출 소싱 파트너이며 원래 브랜드와 제휴 관계가 없습니다. 상표는 각 소유자의 재산으로 남아 있습니다. 최종 적합성은 RFQ 과정에서 도면/사양 검토를 통해 확인됩니다.