CSTONE
RFQ 목록

제품 상세

SMA Female to SMA Male Cable Using 93 Ohm RG62 Coax

중국 조달 호환 대체품 — 도면/사양 검토로 적합성을 확인합니다.

품번 (MPN)

PE3405

임피던스

50

인터페이스

SMA

도면 기반 맞춤 RF 케이블 어셈블리 생산 소싱

호환성 검토, MOQ 안내, 원가 절감 소싱 지원을 포함한 생산 중심 도면 기반 맞춤 RF 케이블 어셈블리.

도면 기반 맞춤 RF 케이블 →
WhatsApp — 빠른 응답
납기: 3–6주 | MOQ: 200+개
RFQ 전에 준비할 사항 명확한 입력은 추측을 줄이고 유용한 답변을 앞당깁니다.
  • 검토에 중요하다면 참조 MPN, 결합 부품 또는 원 브랜드를 공유해 주세요.
  • 프로젝트가 시제품 수량을 넘는다면 BOM, 수량 구분, 연간 수요를 추가해 주세요.
  • 도면, 데이터 시트 또는 임피던스, 주파수, 장착, 도금에 관한 핵심 요구사항을 첨부해 주세요.

이미지

클릭하여 확대

제품 이미지

PE3405 product photo

PE3405 product photo

Specifications

Specifications for PE3405
인터페이스Cable Assemblies
인터페이스RG62
인터페이스SMA
인터페이스SMA
임피던스50
임피던스50
임피던스93
젠더Male
젠더Female
방향Straight
방향Straight
Connector Polarity 1Standard
Show 5 more specs
장착 방식None
Connector Polarity 2Standard
장착 방식None
케이블 유형RG62A/U
CategoryCable Assemblies

설명

PE3405의 현재 참조 데이터: SMA · 50 · Straight. 카탈로그에는 구성이 Straight로 표시되어 있습니다. 임피던스는 50로 표시되어 있습니다. 중요한 매개변수라면 RFQ에서 다시 확인하세요. 여기에 장착 정보가 없으면 도면이나 결합 요구사항으로 확인하세요. 이 페이지는 RFQ 전 후보 선정을 위한 것이며 최종 승인 근거가 아닙니다.

RFQ 전에 이 페이지에서 후보를 추리세요. 도면/사양/BOM 검토 후 MOQ 200+ 공급 경로와 맞춤 생산 루트가 확정됩니다.

유사 커넥터

다음 모델도 함께 확인해 보세요:

JF1R6-CR3-6I

RF 케이블 어셈블리 6" U.FL 암 까지 RPSMA 암

자세히 보기 →

LCCA30257/WP-FT3

The L-com LCCA30257/WP-FT3 is a weatherproof low loss cable assembly that comes with SMA male connection with weatherproof boot on one end and BNC male with weatherproof boot on the other. L-com’s RF coaxial cable assembly products are designed for typical use, production, laboratory test and measurement, defense/military, aerial antenna towers, etc. The low loss cable has a 50 Ohm impedance and is specifically ready for quicker shipment than most in the industry can provide.This weatherproof low loss RF cable assembly operates at a maximum frequency of 4 GHz. Our RF cable assembly has a PE jacket with 0.240 inches diameter. The SMA male to BNC male cable assembly LCCA30257/WP-FT3 is built with LMR-240 coax, which has a flexible design.This RF cable assembly with 0.5 inches diameter has copper as cable’s inner conducting material and PE (F) dielectric type. The weatherproof boot low loss cable is reusable and can withstand elements including extreme temperature. Additional dimensions, specifications, and CAD drawings for this LCCA30257/WP-FT3 low loss RF cable are available on our downloadable PDF datasheet.L-com stocks a wide selection of weatherproof low loss cable assemblies that ship the same business day as ordered from our warehouse. Make your online purchase right now to take advantage of our same-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal SMA male to BNC male cable assembly as per your requirements.

자세히 보기 →

SM4693

SMA Female (Jack) to 7/16 DIN Male (Plug) Adapter, 1.3 VSWR

자세히 보기 →

LCCA30420-FT1

L-com N male right angle to SMA female bulkhead cable assembly using LC141TB coax, 1 FT is available for same day shipping from our facility. This high quality N cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30420-FT1 N cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF coaxial cable assemblies are built with right angle N connection on one end and SMA bulkhead connection on the other. This right angle N to SMA cable from L-com has a male to female gender combination. Our N male to SMA female coaxial assembly part number LCCA30420-FT1 can also be known as right angle N plug to SMA jack cable assembly when using alternate gender names. N plug to SMA jack cable assembly LCCA30420-FT1 is manufactured with a formable coax. These formable N to SMA cable assemblies use LC141TB coax and are single shielded. L-com single shielded N male right angle to SMA female bulkhead cable assembly using LC141TB coax, 1 FT is built from quality components by skilled assemblers with many years of experience.Maximum frequency for these N to SMA M/F cables is 10 GHz. Technical performance specifications on these 10 GHz N right angle male to SMA female bulkhead cables are located on the LCCA30420-FT1 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a SMA female bulkhead to right angle N male cable assembly because it can be used in the opposite direction.N male right angle to SMA female bulkhead cable assembly using LC141TB coax, 1 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our right angle N to SMA cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our N male right angle to SMA female bulkhead cable assembly using LC141TB coax, 1 FT.

자세히 보기 →

R125326900W

RF 커넥터 / 동축 커넥터 SMA F 직선 CR .085

자세히 보기 →

PE35371LF

Reverse Thread SMA Male to SMA Male Cable Using RG223 Coax , LF Solder

자세히 보기 →
MPN 검색 정확 일치, 접두사, 부분 일치를 지원합니다.

정확 일치, 접두사, 부분 일치를 지원합니다.

면책 조항

Cstone은 무역회사가 아니라 N-type, BNC, SMA, SMP, SSMB, MMCX 등을 포함한 RF 및 동축 커넥터, 어댑터, 케이블 어셈블리를 생산하는 전문 공장입니다. 2D 도면 또는 샘플에 따라 커넥터를 제작하며 적합성, MOQ, 납기 및 생산 세부사항은 RFQ에서 확인합니다. Cstone Technology는 원 브랜드와 제휴하지 않습니다. 제조사 이름, 상표, 기호 및 부품 번호는 식별 및 상호 참조 목적으로만 사용됩니다. 상표는 각 소유자의 재산으로 남아 있습니다. 최종 적합성은 RFQ 과정에서 도면/사양 검토를 통해 확인됩니다.