CSTONE
RFQ 목록

제품 상세

TRB 3-Slot Straight Plug Bulkhead 78 Ohm

중국 조달 호환 대체품 — 도면/사양 검토로 적합성을 확인합니다.

품번 (MPN)

LC3MSA00478-48

임피던스

78 Ohm

인터페이스

TRB 3-Slot

도면 기반 맞춤 RF 케이블 어셈블리 생산 소싱

호환성 검토, MOQ 안내, 원가 절감 소싱 지원을 포함한 생산 중심 도면 기반 맞춤 RF 케이블 어셈블리.

도면 기반 맞춤 RF 케이블 →
WhatsApp — 빠른 응답
납기: 3–6주 | MOQ: 200+개
RFQ 전에 준비할 사항 명확한 입력은 추측을 줄이고 유용한 답변을 앞당깁니다.
  • 검토에 중요하다면 참조 MPN, 결합 부품 또는 원 브랜드를 공유해 주세요.
  • 프로젝트가 시제품 수량을 넘는다면 BOM, 수량 구분, 연간 수요를 추가해 주세요.
  • 도면, 데이터 시트 또는 임피던스, 주파수, 장착, 도금에 관한 핵심 요구사항을 첨부해 주세요.

이미지

클릭하여 확대

제품 이미지

LC3MSA00478-48 product photo

LC3MSA00478-48 product photo

Specifications

Specifications for LC3MSA00478-48
인터페이스Coaxial Cable Assemblies
인터페이스30-02003-LC
인터페이스TRB 3-Slot
인터페이스TRB 3-Lug
임피던스78 Ohm
임피던스78 Ohm
임피던스78 Ohm
젠더Plug
젠더Jack
방향Straight
방향Straight
Connector 1 Body MaterialBrass
Show 7 more specs
Connector 1 Body PlatingNickel
Connector 1 PolarityStandard
Connector 2 PolarityStandard
장착 방식Bulkhead
케이블 유형30-02003-LC
Length, Max48 inches
CategoryCoaxial Cable Assemblies

설명

LC3MSA00478-48의 현재 참조 데이터: TRB 3-Slot · 78 Ohm · Bulkhead. 카탈로그에는 구성이 Straight로 표시되어 있습니다. 임피던스는 78 Ohm로 표시되어 있습니다. 중요한 매개변수라면 RFQ에서 다시 확인하세요. 장착 방식은 Bulkhead로 표시되어 있습니다. 패널, 관통 장착 또는 플랜지 제약이 중요하면 RFQ와 함께 치수를 보내주세요. 재질은 Brass로 표시되어 있습니다. 검토에는 도움이 되지만 전체 프로젝트 구조 확인을 대신하지는 않습니다. 이 페이지는 RFQ 전 후보 선정을 위한 것이며 최종 승인 근거가 아닙니다.

RFQ 전에 이 페이지에서 후보를 추리세요. 도면/사양/BOM 검토 후 MOQ 200+ 공급 경로와 맞춤 생산 루트가 확정됩니다.

유사 커넥터

다음 모델도 함께 확인해 보세요:

84030868

HUBER+SUHNER N connectors perform to a maximum frequency of up to 18 GHz, depending on the connector and cable type.

자세히 보기 →

M55116/6-4

DIN 커넥터 M55116 / 6-4

자세히 보기 →

557B386NF530

D-Sub 백셸 EMI / RFI BANDING BS 어셈블리 45 DEGREE

자세히 보기 →

LCCN45883

Cable Termination Non-Magnetic Right Angle PCB Mount type Connector LCCN45883 from L-Com is in stock at our warehouse and ready to ship on the same-day of your order. The LCCN45883 is a cable termination Non-magnetic right-angle PCB mount type Connector compatible with RG179, RG316. These Non-Magnetic Connector frequency ranges from 0-3 GHz with 50 Ohms impedance. Our RF coaxial connector specialists are available to answer any questions or concerns you have on the LCCN45883 Cable Termination Non-Magnetic Right-Angle PCB Mount. Our Non-magnetic connectors have a susceptibility of around 10⁻⁵, as opposed to 10ˉ² for standard connectors made of brass/nickel materials. As a result, our non-magnetic connectors are transparent to the magnetic field, which means no field distortion and a higher Signal-to-Noise Ratio (SNR). Contact L-Com’s expert technical support for assistance with the cable termination Non-Magnetic right angle PCB mount type Connector or any RF coaxial cable connectors or cable assemblies. Download our LCCN45883 datasheet with specifications and CAD drawing with dimensions for details. Our knowledgeable sales team simplifies the purchasing process and ensures that your cable termination Non-magnetic RF coaxial connector will be exact to your specifications. The target audience for the right-angle coaxial is for quantum computing, the military and aerospace industries as well as the medical industry including MRI and patient monitoring devices. The LCCN45883 connector from L-Com uses a dedicated manufacturing process and raw material selection to guarantee the low magnetic susceptibility level of the connectors. The Cable Termination right angle RF coax connector is available now from L-Com. We have no MOQ (minimum order quantity) and the connector ships the very same day from our warehouse.

자세히 보기 →

507-145M09

D-Sub 백셸 SPLIT SHELL BANDING ROUND 케이블 ENTRY

자세히 보기 →

L777HDD78PD1CH3R

D-Sub 고밀도 커넥터 D-SUB, Stamped Signal 3A, 직각 PCB 스루홀, FP=8.89 mm (.350"), 78 핀, Bright 주석 Shell+Grounding Dimples, 0.38 m (15 in) 금, M3 Rear Insert, Ground Tab 포함 Boardlock

자세히 보기 →
MPN 검색 정확 일치, 접두사, 부분 일치를 지원합니다.

정확 일치, 접두사, 부분 일치를 지원합니다.

면책 조항

Cstone은 무역회사가 아니라 N-type, BNC, SMA, SMP, SSMB, MMCX 등을 포함한 RF 및 동축 커넥터, 어댑터, 케이블 어셈블리를 생산하는 전문 공장입니다. 2D 도면 또는 샘플에 따라 커넥터를 제작하며 적합성, MOQ, 납기 및 생산 세부사항은 RFQ에서 확인합니다. Cstone Technology는 원 브랜드와 제휴하지 않습니다. 제조사 이름, 상표, 기호 및 부품 번호는 식별 및 상호 참조 목적으로만 사용됩니다. 상표는 각 소유자의 재산으로 남아 있습니다. 최종 적합성은 RFQ 과정에서 도면/사양 검토를 통해 확인됩니다.