제품 상세
FMAD1565 — Miter 직각 SMA 암 까지 2.92 mm 암 어댑터 포함 Passivated Stainless 강철 Body, DC 까지 27 GHz
품번 (MPN)
주파수
DC 까지 27 GHz
도면 기반 맞춤 RF 케이블 어셈블리 생산 소싱
호환성 검토, MOQ 안내, 원가 절감 소싱 지원을 포함한 생산 중심 도면 기반 맞춤 RF 케이블 어셈블리.
RFQ 전에 준비할 사항 명확한 입력은 추측을 줄이고 유용한 답변을 앞당깁니다. ⌄
- • 검토에 중요하다면 참조 MPN, 결합 부품 또는 원 브랜드를 공유해 주세요.
- • 프로젝트가 시제품 수량을 넘는다면 BOM, 수량 구분, 연간 수요를 추가해 주세요.
- • 도면, 데이터 시트 또는 임피던스, 주파수, 장착, 도금에 관한 핵심 요구사항을 첨부해 주세요.
이미지
클릭하여 확대
Specifications
| 주파수(최대) | DC 까지 27 GHz |
|---|---|
| Signal Performance 항목 | 1.2: 1 |
| 접점 Geometry | 0.600 in [15.2 mm] |
| Category 항목 | 동축 커넥터 |
| 제품 유형 | 동축 커넥터 |
설명
FMAD1565의 현재 참조 데이터: DC 까지 27 GHz. 주파수는 DC 까지 27 GHz로 표시되어 있습니다. 실제 작동 한계는 조립 상태, 결합 부품, 적용 환경에 따라 달라집니다. 고주파 프로젝트는 첫 RFQ에 도면, 케이블 경로, 중요 요구사항을 포함해 주세요. 여기에 장착 정보가 없으면 도면이나 결합 요구사항으로 확인하세요. 이 페이지는 RFQ 전 후보 선정을 위한 것이며 최종 승인 근거가 아닙니다.
RFQ 전에 이 페이지에서 후보를 추리세요. 도면/사양/BOM 검토 후 MOQ 200+ 공급 경로와 맞춤 생산 루트가 확정됩니다.
유사 커넥터
다음 모델도 함께 확인해 보세요:
RFPCB-SMA-FR18G-53
RFPCB-SMA-FR18G-53 SMA female PCB connector available from L-com has a 50 Ohm impedance. This RF connector has an end launch connector mount interface and is designed for a wide variety of Printed-Circuit Board (PCB) applications in RF and microwave systems. This SMA female connector uses solder as an attachment method. Our SMA female PCB connector provides a minimum frequency of DC and a maximum frequency of 18 GHz. The SMA connector is available in a 0.57-inch length and 0.25-inch width. The L-com SMA female PCB connector has a PTFE dielectric type and a VSWR of 1.46:1. This SMA PCB connector has a brass body with gold plating. Our RFPCB-SMA-FR18G-53 SMA connector uses beryllium copper alloy contacts and gold plating material. This SMA female PCB radio frequency connector is RoHS and REACH compliant. This L-com SMA female connector will ship the same day as purchased. Our SMA female connector is part of over 40,000 RF, microwave, and millimeter wave components in stock for worldwide shipment. We also build SMA custom connector cable assemblies that will ship the same day as well. The SMA female connector with 50 Ohm impedance has a weight of 0.00657 lbs. This RF connector has a high-quality construction. The female coaxial connector is capable of operating at temperatures ranging from -65 deg C to 165 deg C. We currently have a variety of antenna, audio/video, Ethernet, fiber optic, and USB connectors in our portfolio that are ready to ship today. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the high-quality RF that meets your requirements.
AMM-1102
The AMM-1102 is an MCX plug for RG316 and 100-series cable that is a crimp termination style from L-com. Taking advantage of the gold plated center contact, this MCX crimp connector is made for applications such as GPS, PCMCIA, Digital Cellular WLAN and wireless networking. This connector is designed for use with RG316, RG174, RG188‚ WBC-100‚ LMR®100A and Belden 7805 cable types. The small form factor ideally suited for high density applications and the snap on coupling mechanism simplifies the mating and unmating process. Order online today!
A30N85-142-
SMA 플러그 까지 N 잭 bulkhead IP67 mated using RG142
LCCA30312-FT10
L-com's LCCA30312-FT10 is a low loss N female bulkhead to SMA male cable assembly using LMR-400-DB coax, 10 FT with Times Microwave components with heatshrink and ships same-day. The LMR-400-DB coax of this N cable uses the PE (F) dielectric with a VoP of 85%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com N to SMA cable assembly has a female to male gender configuration with flexible LMR-400-DB series coax and operates to 6 GHz. The double shield of this N cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. L-com's RF cable assembly with N bulkhead interface enables system designers to have external connections on their product enclosures or to be used for other rack mount and panel mount applications. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N female to N male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30312-FT10 L-com Low Loss N Female Bulkhead to SMA Male Cable Assembly using LMR-400-DB Coax, 10 FT with Times Microwave Components with HeatShrink data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
733910232
RF 동축 커넥터 733910232 SMA 플러그, 우-각, 크림프, RG-174, RG-188 및 RG-316 케이블, 황동 Body, 금 (Au) Plated, 아니오
면책 조항
Cstone은 무역회사가 아니라 N-type, BNC, SMA, SMP, SSMB, MMCX 등을 포함한 RF 및 동축 커넥터, 어댑터, 케이블 어셈블리를 생산하는 전문 공장입니다. 2D 도면 또는 샘플에 따라 커넥터를 제작하며 적합성, MOQ, 납기 및 생산 세부사항은 RFQ에서 확인합니다. Cstone Technology는 원 브랜드와 제휴하지 않습니다. 제조사 이름, 상표, 기호 및 부품 번호는 식별 및 상호 참조 목적으로만 사용됩니다. 상표는 각 소유자의 재산으로 남아 있습니다. 최종 적합성은 RFQ 과정에서 도면/사양 검토를 통해 확인됩니다.