제품 상세
SMA PCB 스루홀 직각 잭 50 Ω
품번 (MPN)
주파수
18
도면 기반 맞춤 RF 케이블 어셈블리 생산 소싱
호환성 검토, MOQ 안내, 원가 절감 소싱 지원을 포함한 생산 중심 도면 기반 맞춤 RF 케이블 어셈블리.
RFQ 전에 준비할 사항 명확한 입력은 추측을 줄이고 유용한 답변을 앞당깁니다. ⌄
- • 검토에 중요하다면 참조 MPN, 결합 부품 또는 원 브랜드를 공유해 주세요.
- • 프로젝트가 시제품 수량을 넘는다면 BOM, 수량 구분, 연간 수요를 추가해 주세요.
- • 도면, 데이터 시트 또는 임피던스, 주파수, 장착, 도금에 관한 핵심 요구사항을 첨부해 주세요.
이미지
클릭하여 확대
Specifications
| 바디 마감 | 금 |
|---|---|
| 바디 재질 | Stainless 강철 |
| 케이블 유형 (Terminates 까지) | 해당 없음 |
| 접점 마감 | 금 |
| 접점 재질 | 베릴륨 구리 |
| 접점 종단 | 솔더 |
| 결합 메커니즘 | 나사식 |
| 수출통제분류번호 | EAR99 |
| 주파수(최대) | 18 |
| 성별 | 잭 |
| IP 등급 | 정격 없음 |
| 임피던스 (Ω) | 50 |
Show 13 more specs
| 절연체 재질 | PTFE |
|---|---|
| 절연됨 | 아니오 |
| Low PIM | 아니오 |
| MIL 인증 | MIL 미인증 |
| 비자성 | 아니오 |
| 방향 | 직각 |
| 패널 장착 Feature | 해당 없음 |
| 포트 | 1 (Single Port) |
| 사이즈 카테고리 | Subminiature |
| 온도 (Max °C) | 165 |
| 온도 (Min °C) | -65 |
| 종단 방식 | PCB - 스루홀 |
| 나사 방향 | 표준 |
설명
901-143의 현재 참조 데이터: 18. 주파수는 18로 표시되어 있습니다. 실제 작동 한계는 조립 상태, 결합 부품, 적용 환경에 따라 달라집니다. 고주파 프로젝트는 첫 RFQ에 도면, 케이블 경로, 중요 요구사항을 포함해 주세요. 여기에 장착 정보가 없으면 도면이나 결합 요구사항으로 확인하세요. 카탈로그에는 밀폐 또는 보호 값 정격 없음도 표시되어 있습니다. 실제 사용 환경 요구와 RFQ에서 대조하세요. 이 페이지는 RFQ 전 후보 선정을 위한 것이며 최종 승인 근거가 아닙니다.
RFQ 전에 이 페이지에서 후보를 추리세요. 도면/사양/BOM 검토 후 MOQ 200+ 공급 경로와 맞춤 생산 루트가 확정됩니다.
유사 커넥터
다음 모델도 함께 확인해 보세요:
CSI-RSFB-100-UFFR
RF 케이블 어셈블리 RP-SMA 암 bulkhead (CONREVSMA005B-1.13) 까지 직각 U.FL 암 (CONUFL012-1.13) 포함 100 mm of 1.13 mm 케이블
SMA-5012-31-HRM-00
RF 커넥터 / 동축 커넥터 SMA FEM CN
LCCA30608-FT2
L-com SMA male to N female bulkhead semi-flexible cable assembly using LC085TBJ coax, 2 FT , LF solder is available for same day shipping from our facility. This high quality SMA cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30608-FT2 SMA cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF coaxial cable assemblies are built with SMA connection on one end and N bulkhead connection on the other. This SMA to N cable from L-com has a male to female gender combination. Our SMA male to N female coaxial assembly part number LCCA30608-FT2 can also be known as SMA plug to N jack cable assembly when using alternate gender names. SMA plug to N jack cable assembly LCCA30608-FT2 is manufactured with a formable coax. These formable SMA to N cable assemblies use LC085TBJ coax and are single shielded. L-com single shielded SMA male to N female bulkhead semi-flexible cable assembly using LC085TBJ coax, 2 FT , LF solder is built from quality components by skilled assemblers with many years of experience.Maximum frequency for these SMA to N M/F cables is 10 GHz. Technical performance specifications on these 10 GHz SMA male to N female bulkhead cables are located on the LCCA30608-FT2 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a N female bulkhead to SMA male cable assembly because it can be used in the opposite direction.SMA male to N female bulkhead semi-flexible cable assembly using LC085TBJ coax, 2 FT , LF solder is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our SMA to N cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our SMA male to N female bulkhead semi-flexible cable assembly using LC085TBJ coax, 2 FT , LF solder.
CC174RP-10
In situations that require an extension cable to relocate a wireless LAN antenna these are the cables you need. FCC part 15.203 dictates the need for a non standard interface to be used for connectors designed for use on spread spectrum wireless devices. These coaxial cable assemblies feature a Reverse Polarized SMA Plug to Jack configuration allowing you to simply remove the antenna from the base unit and relocate using these extension cables to link the antenna to the base unit. This type of extension cable with non standard interfaces can be difficult to find but are typically available in stock from L-com.
Flat (V-Groove) (2-core) SM ST-SMA905
This product is an optical fiber cable pre-terminated with optical connectors. The standard cable color varies depending on the fiber mode. This is a flat (v-groove) cable (2-core), single-mode (SM), with ST-SMA905 connectors.Example model: TFC-2C-SM-ST-SMA-1m-HYou can select the fiber count (1-core/2-core/4-core), mode (single-mode (SM) / multimode (OM1–OM5), and connector type (SC/LC/ST/FC/MU/SMA905), and specify the overall length. Please refer to the specifications.Delivery is typically 2 to 5 weeks after order placement. Please contact us for details.
PE34163
N Female Bulkhead to SMA Male Cable Using PE-SR401FL Coax
면책 조항
Cstone은 무역회사가 아니라 N-type, BNC, SMA, SMP, SSMB, MMCX 등을 포함한 RF 및 동축 커넥터, 어댑터, 케이블 어셈블리를 생산하는 전문 공장입니다. 2D 도면 또는 샘플에 따라 커넥터를 제작하며 적합성, MOQ, 납기 및 생산 세부사항은 RFQ에서 확인합니다. Cstone Technology는 원 브랜드와 제휴하지 않습니다. 제조사 이름, 상표, 기호 및 부품 번호는 식별 및 상호 참조 목적으로만 사용됩니다. 상표는 각 소유자의 재산으로 남아 있습니다. 최종 적합성은 RFQ 과정에서 도면/사양 검토를 통해 확인됩니다.