제품 상세
Our standard PE coax cables consist of single or double shielding with a range of 50 and 75 ohm to deliver high-quality performance along with highly-efficient insertion loss.
품번 (MPN)
임피던스
50 Ω +/-2Ω
주파수
≤ 6 GHz
도면 기반 맞춤 RF 케이블 어셈블리 생산 소싱
호환성 검토, MOQ 안내, 원가 절감 소싱 지원을 포함한 생산 중심 도면 기반 맞춤 RF 케이블 어셈블리.
RFQ 전에 준비할 사항 명확한 입력은 추측을 줄이고 유용한 답변을 앞당깁니다. ⌄
- • 검토에 중요하다면 참조 MPN, 결합 부품 또는 원 브랜드를 공유해 주세요.
- • 프로젝트가 시제품 수량을 넘는다면 BOM, 수량 구분, 연간 수요를 추가해 주세요.
- • 도면, 데이터 시트 또는 임피던스, 주파수, 장착, 도금에 관한 핵심 요구사항을 첨부해 주세요.
이미지
클릭하여 확대
Specifications
| 임피던스 | 50 Ω +/-2Ω |
|---|---|
| 주파수(최대) | ≤ 6 GHz |
| Centre conductor | Copper, Silver plated |
| Dielectric | PE (Polyethylene) |
| Outer conductor | Copper, Tin plated |
| 젠더 | PVC (Polyvinyl chloride) |
| Capacitance | 101 pF/m |
| Velocity of signal propagation | 66 % |
| Signal delay | 5.03 ns/m |
| Screening effectiveness | 71 dB at frequency 0.001 GHz ... 1GHz |
| Insulation resistance | 100000000 MΩ*m |
| Inner conductor resistance | 5.8 Ω/km |
Show 16 more specs
| Outer conductor resistance | 3.9 Ω/km |
|---|---|
| Operating Voltage (at sea level) | ≤ 5 kVrms |
| Voltage Rating UL | 30 V |
| Phase vs temperature | -40 ... 70 °C |
| Phaase vs bending | 9 °/GHz |
| Test voltage (50 Hz/1 min) | ≤ 10 kVrms |
| Weight | approx. 189 g/m |
| Static bending radius | ≥ 55 mm |
| Repeated bending radius | 108 mm |
| Operation temperature | -25 °C ... 85 °C |
| Installation temperature | -20 °C ... 60 °C |
| Flame propagation standard | UL (vertical flame test similar VW-1) |
| Fire characteristics | contains halogene |
| Directive | RoHS 2011/65/EU and (EU) 2015/863 |
| Rating | Free of SVHC >0,1% |
| Regulation | REACH 1907/2006 Article 33 SVHC |
설명
22511566의 현재 참조 데이터: 50 Ω +/-2Ω · ≤ 6 GHz. 임피던스는 50 Ω +/-2Ω로 표시되어 있습니다. 중요한 매개변수라면 RFQ에서 다시 확인하세요. 주파수는 ≤ 6 GHz로 표시되어 있습니다. 실제 작동 한계는 조립 상태, 결합 부품, 적용 환경에 따라 달라집니다. 고주파 프로젝트는 첫 RFQ에 도면, 케이블 경로, 중요 요구사항을 포함해 주세요. 여기에 장착 정보가 없으면 도면이나 결합 요구사항으로 확인하세요. 이 페이지는 RFQ 전 후보 선정을 위한 것이며 최종 승인 근거가 아닙니다.
RFQ 전에 이 페이지에서 후보를 추리세요. 도면/사양/BOM 검토 후 MOQ 200+ 공급 경로와 맞춤 생산 루트가 확정됩니다.
유사 커넥터
다음 모델도 함께 확인해 보세요:
FMCA1868
Plenum Low PIM RA 7/16 DIN Male to N Male Cable SPP-250-LLPL Coax Using Times Microwave Parts
85259454
MICROBEND features include 35 % lower loss than 0.047-inch semi-rigid cable, a minimum bend radius of 1.52 mm (0.060 inch) and triple shielding for high isolation. MICROBEND assemblies are available with a wide range of connector interfaces.
15AL7FX
DIN 커넥터 7P DIN CBL MNT CON F RCPT 포함 GRND
FMCA100118
Fire Rated Low PIM 7/16 DIN Male to N Male Cable TCOM-400-FR Coax With Times Microwave Components
84084633
Sucoform hand-formable microwave cables have a tin-soaked copper braid for the outer conductor, giving them outstanding hand-formability and a distinct mechanical advanatage over semi-rigid cables
L777SDEH09POL2VF
표준 D-Sub 커넥터 D-SUB, Stamped Signal 3A, 직선 PCB 스루홀, Back Insulator Plus Back Shell Height 6.0 mm, 9 핀, 0.38 m (15 in) 금, Bright 주석 Shell+Grounding Dimples, 4-40 Removable Front Screwlock, 미포함 Standoff 및 Boardlock
면책 조항
제조사 이름, 상표, 기호 및 부품 번호는 식별 및 상호 참조 목적으로만 사용됩니다. Cstone Technology는 호환 가능한 대안을 위한 중국 기반 수출 소싱 파트너이며 원래 브랜드와 제휴 관계가 없습니다. 상표는 각 소유자의 재산으로 남아 있습니다. 최종 적합성은 RFQ 과정에서 도면/사양 검토를 통해 확인됩니다.