제품 상세
TNC 직각 PCB 잭 스루홀 50 Ω
품번 (MPN)
주파수
11
도면 기반 맞춤 RF 케이블 어셈블리 생산 소싱
호환성 검토, MOQ 안내, 원가 절감 소싱 지원을 포함한 생산 중심 도면 기반 맞춤 RF 케이블 어셈블리.
RFQ 전에 준비할 사항 명확한 입력은 추측을 줄이고 유용한 답변을 앞당깁니다. ⌄
- • 검토에 중요하다면 참조 MPN, 결합 부품 또는 원 브랜드를 공유해 주세요.
- • 프로젝트가 시제품 수량을 넘는다면 BOM, 수량 구분, 연간 수요를 추가해 주세요.
- • 도면, 데이터 시트 또는 임피던스, 주파수, 장착, 도금에 관한 핵심 요구사항을 첨부해 주세요.
이미지
클릭하여 확대
Specifications
| 바디 마감 | 니켈 |
|---|---|
| 바디 재질 | 황동 |
| 케이블 유형 (Terminates 까지) | 해당 없음 |
| 접점 마감 | 금 |
| 접점 재질 | 인청동 |
| 접점 종단 | 솔더 |
| 결합 메커니즘 | 나사식 |
| 수출통제분류번호 | EAR99 |
| 주파수(최대) | 11 |
| 성별 | 잭 |
| IP 등급 | 정격 없음 |
| 임피던스 (Ω) | 50 |
Show 13 more specs
| 절연체 재질 | PTFE |
|---|---|
| 절연됨 | 아니오 |
| Low PIM | 아니오 |
| MIL 인증 | MIL 미인증 |
| 비자성 | 아니오 |
| 방향 | 직각 |
| 패널 장착 Feature | 해당 없음 |
| 포트 | 1 (Single Port) |
| 사이즈 카테고리 | Miniature |
| 온도 (Max °C) | 85 |
| 온도 (Min °C) | -40 |
| 종단 방식 | PCB - 스루홀 |
| 나사 방향 | 표준 |
설명
031-5607의 현재 참조 데이터: 11. 주파수는 11로 표시되어 있습니다. 실제 작동 한계는 조립 상태, 결합 부품, 적용 환경에 따라 달라집니다. 고주파 프로젝트는 첫 RFQ에 도면, 케이블 경로, 중요 요구사항을 포함해 주세요. 여기에 장착 정보가 없으면 도면이나 결합 요구사항으로 확인하세요. 카탈로그에는 밀폐 또는 보호 값 정격 없음도 표시되어 있습니다. 실제 사용 환경 요구와 RFQ에서 대조하세요. 이 페이지는 RFQ 전 후보 선정을 위한 것이며 최종 승인 근거가 아닙니다.
RFQ 전에 이 페이지에서 후보를 추리세요. 도면/사양/BOM 검토 후 MOQ 200+ 공급 경로와 맞춤 생산 루트가 확정됩니다.
유사 커넥터
다음 모델도 함께 확인해 보세요:
PE44811
TNC Female Bulkhead Mount Precision Connector Clamp/Solder Attachment for PE-P142LL
N30T90-L240-
N 플러그 까지 TNC 역극성 극성 잭 using JBY240
LCCA30306-FT4
L-com's LCCA30306-FT4 is a low loss N male right angle to TNC male cable assembly using LMR-400 coax, 4 FT with Times Microwave components and ships same-day. The LMR-400 coax of this N cable uses the PE (F) dielectric with a VoP of 85%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com N to TNC cable assembly has a male to male gender configuration with flexible LMR-400 series coax and operates to 6 GHz. The double shield of this N cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. This right angle N cable interface on the LMR-400 coax allows for easier connections in tight spaces. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N male to N male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30306-FT4 L-com Low Loss N Male Right Angle to TNC Male Cable Assembly using LMR-400 Coax, 4 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
LCCA30024-FT1
L-com low loss TNC male to TNC female bulkhead cable assembly with heavy duty heat shrink boot using LL142 coax, 1 FT is available for same day shipping from our facility. This high quality TNC cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30024-FT1 TNC cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF low loss coaxial cable assemblies are built with TNC connection on one end and TNC bulkhead connection on the other. This low loss TNC to TNC cable from L-com has a male to female gender combination. Our TNC male to TNC female coaxial assembly part number LCCA30024-FT1 can also be known as low loss TNC plug to TNC jack cable assembly when using alternate gender names. TNC plug to TNC jack cable assembly LCCA30024-FT1 is manufactured with a flexible coax. These flexible TNC to TNC cable assemblies use LL142 coax and are triple shielded. L-com triple shielded low loss TNC male to TNC female bulkhead cable assembly with heavy duty heat shrink boot using LL142 coax, 1 FT is built from quality components by skilled assemblers with many years of experience.Maximum frequency for these TNC to TNC M/F cables is 18 GHz. Technical performance specifications on these 18 GHz TNC male to TNC female bulkhead cables are located on the LCCA30024-FT1 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a low loss TNC female bulkhead to TNC male cable assembly because it can be used in the opposite direction.Low loss TNC male to TNC female bulkhead cable assembly with heavy duty heat shrink boot using LL142 coax, 1 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our TNC to TNC cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our low loss TNC male to TNC female bulkhead cable assembly with heavy duty heat shrink boot using LL142 coax, 1 FT.
R417606130
Attenuators - Interconnects ATT TNC 6DB 4 GHz
Telegartner: TNC Adaptor
Telegartner: TNC Adaptor, 50 Ohm, m-m (packed per 1)
면책 조항
Cstone은 무역회사가 아니라 N-type, BNC, SMA, SMP, SSMB, MMCX 등을 포함한 RF 및 동축 커넥터, 어댑터, 케이블 어셈블리를 생산하는 전문 공장입니다. 2D 도면 또는 샘플에 따라 커넥터를 제작하며 적합성, MOQ, 납기 및 생산 세부사항은 RFQ에서 확인합니다. Cstone Technology는 원 브랜드와 제휴하지 않습니다. 제조사 이름, 상표, 기호 및 부품 번호는 식별 및 상호 참조 목적으로만 사용됩니다. 상표는 각 소유자의 재산으로 남아 있습니다. 최종 적합성은 RFQ 과정에서 도면/사양 검토를 통해 확인됩니다.