CSTONE
RFQリスト

製品詳細

This N-Female to 7/16 DIN Male coaxial adapter provides the ability to connect between a N-Male and 7/16 DIN Female interface. The silver plated body helps ensure durability and long life in the field.

中国調達の互換代替品 — 図面・仕様レビューで適合を確認します。

品番 (MPN)

AXA-NFDM

インピーダンス

50 Ohm

周波数

DC

インターフェース

7/16 DIN

図面からのカスタムRFケーブルアセンブリの量産調達

互換性確認、MOQガイド、コストダウン調達サポートを含む量産向け図面からのカスタムRFケーブルアセンブリ。

図面ベースのカスタムRFケーブル →
WhatsApp — 迅速な返信
納期:3〜6週間 | MOQ:200+個
RFQ前に準備すること 明確な入力情報は推測を減らし、有用な回答を早めます。
  • レビューに関連する場合は、参照MPN、メイティング部品、またはソースブランドを共有してください。
  • プロジェクトがプロトタイプ数量を超える場合は、BOM、数量配分、年間需要を追加してください。
  • インピーダンス、周波数、実装、めっきに関する図面、データシート、または重要要件を添付してください。

画像

クリックで拡大

製品画像

AXA-NFDM product photo

AXA-NFDM product photo

仕様

AXA-NFDM の仕様
インターフェースCoaxial Adapters
インターフェース7/16 DIN
インターフェースN
インピーダンス50 Ohm
インピーダンス50 Ohm
周波数(最大)DC
周波数(最大)6 GHz
性別Male
性別Female
Adapter Body StyleStraight
Connector Body Material 1Brass
Connector Body Material 2Brass
さらに 9 件の仕様を表示
Connector Body Plating 1Silver
Connector Body Plating 2Silver
Connector Polarity 1Standard
Connector Polarity 2Standard
取付方式None
取付方式None
CategoryCoaxial Adapters
ApplicationCoax retrofit applications; Coaxial extension; Coaxial interface conversion; OEM coax applications
Product FeaturesAllows interconnection of devices with N-Male and 7/16 DIN Female interfaces; Adapters utilize machined components for durability and long life; Handy device to have on hand to solve your interconnection problems; Silver plated adapter body

説明

AXA-NFDM の現在の参照データ:7/16 DIN · 50 Ohm · DC。 インピーダンスは 50 Ohm と記載されています。重要な項目であれば RFQ で再確認してください。 周波数は DC と記載されています。実際の動作上限は、組立、相手部品、使用環境によって変わります。 ここに実装情報がない場合は、図面または嵌合要件から確認してください。 材料は Brass と記載されています。確認には役立ちますが、プロジェクト全体の構造確認の代わりにはなりません。 このページは RFQ 前の候補選定に使用し、最終承認の根拠にはしないでください。

RFQ前の絞り込みにこのページをご利用ください。図面/仕様書/BOM確認後にMOQ 200+ の供給経路とカスタム生産ルートを確定します。

類似コネクタ

こちらのモデルもご覧ください:

T 3400 018

Circular DIN コネクタ 6 ピン オス; 金 ケーブル 取付

詳細を見る →

LCCA30209-FT5

L-com's LCCA30209-FT5 is a 75 Ohm low loss N male to N male cable assembly using LMR-400-75 coax, 5 FT with Times Microwave components and ships same-day. The LMR-400-75 coax of this N cable uses the PE (F) dielectric with a VoP of 85%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com N to N cable assembly has a male to male gender configuration with 75 Ohm flexible LMR-400-75 series coax and operates to 2.5 GHz. The double shield of this N cable is layered by tinned copper over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N male to N male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30209-FT5 L-com 75 Ohm Low Loss N Male to N Male Cable Assembly using LMR-400-75 Coax, 5 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.

詳細を見る →

L717SDE09P1ACO4R

D-Sub標準コネクタ D-SUB, Stamped Signal 3A, ライトアングル PCB スルーホール, FP=10.40 mm (.409in), Row Pitch 2.54 mm, 09 ピン, Flash 金, Bright 錫 Shell+Grounding Dimples, 4-40 Rear Insert, Ground Tab 付き Clear Hole なし Boardlock

詳細を見る →

85032410

HUBER+SUHNER N connectors perform to a maximum frequency of up to 18 GHz, depending on the connector and cable type.

詳細を見る →

601-0400

DIN コネクタ ソケット 4 °C BLACK

詳細を見る →

T3374-951

Circular DIN コネクタ オス ケーブル コネクタ 5 WAY

詳細を見る →
MPN検索 完全一致・前方一致・部分一致に対応しています。

完全一致・前方一致・部分一致に対応しています。

免責事項

Cstoneは商社ではなく、N-type、BNC、SMA、SMP、SSMB、MMCXなどのRF・同軸コネクタ、アダプタ、ケーブルアセンブリを製造する専門工場です。2D図面またはサンプルに基づいてコネクタを製造し、適合性、MOQ、納期、生産内容はRFQで確認します。 Cstone Technologyは元ブランドと提携していません。 メーカー名、商標、記号、部品番号は、識別およびクロスリファレンスの目的でのみ使用されています。 商標はそれぞれの所有者に帰属します。 最終的な適合性はRFQプロセスにおける図面/仕様書のレビューで確認されます。