Detail produk
4.1/9.5 Mini DIN Male Right Angle to 4.3-10 Female Cable Using SPP-250-LLPL Coax
Nomor komponen (MPN)
Impedansi
50 Ohm
Antarmuka
4.1/9.5 Mini DIN
rakitan kabel RF kustom dari gambar untuk sourcing produksi
rakitan kabel RF kustom dari gambar berorientasi produksi dengan review kompatibilitas, panduan MOQ, dan dukungan sourcing cost-down.
Apa yang harus disiapkan sebelum RFQ Input yang jelas mengurangi dugaan dan mempercepat jawaban yang berguna. ⌄
- • Bagikan MPN referensi, komponen pasangan, atau merek asal jika relevan untuk peninjauan.
- • Tambahkan BOM, pembagian kuantitas, dan permintaan tahunan jika proyek melewati tahap prototipe.
- • Lampirkan gambar, lembar data, atau persyaratan kritis untuk impedansi, frekuensi, pemasangan, dan pelapisan.
Gambar
Klik untuk memperbesar.
Specifications
| Antarmuka | Cable Assemblies |
|---|---|
| Antarmuka | SPP-250-LLPL |
| Antarmuka | 4.1/9.5 Mini DIN |
| Antarmuka | 4.3-10 |
| Impedansi | 50 Ohm |
| Impedansi | 50 Ohm |
| Impedansi | 50 Ohm |
| Jenis kelamin konektor | Male |
| Jenis kelamin konektor | Female |
| Orientasi | Right Angle |
| Orientasi | Straight |
| Connector Polarity 1 | Standard |
Show 5 more specs
| Pemasangan | None |
|---|---|
| Connector Polarity 2 | Standard |
| Pemasangan | None |
| Jenis kabel | SPP-250-LLPL |
| Category | Cable Assemblies |
Deskripsi
Data referensi untuk PE3C5950 saat ini mencakup: 4.1/9.5 Mini DIN · 50 Ohm · Right Angle. Katalog saat ini mencantumkan konfigurasi sebagai: Right Angle. Impedansi tercantum sebagai 50 Ohm. Jika parameter ini kritis, konfirmasikan kembali dalam RFQ. Jika data pemasangan tidak ada di sini, konfirmasikan dari gambar atau kebutuhan pasangan konektor. Halaman ini untuk peninjauan dan penyaringan awal; bukan persetujuan akhir.
Gunakan halaman ini untuk menyaring kandidat sebelum RFQ. Jalur pasokan dan produksi kustom MOQ 200+ dikonfirmasi setelah peninjauan gambar/spesifikasi/BOM.
Konektor serupa
Anda mungkin juga tertarik pada model berikut:
FMC1515405
7/16 DIN Male to 7/16 DIN Male Cable LMR-400-UF Coax
557B071NF332STB
backshell D-Sub SOLID BANDING BKSHLL 45DG SLT QWIKTY BAND
LC3MSA00478-48
The L-com LC3MSA00478-48 MIL-STD-1553 flexible RF cable assembly is perfect for applications that need tight bends and flexible cable. This TRB 3-slot to TRB 3-lug cable assembly is plug to jack and made of 78 ohm flexible 30-02003-LC twinax. Our 78 Ohm cable assembly is available with a PVC jacket and a copper inner conductor with silver plating. We offer a blue, 0.69-inch long TRB 3-slot to TRB 3-lug cable that operates at 500 MHz.This blue RF cable assembly is the most commonly utilized cable assembly in wide connectivity applications such as bus couplers, avionics control boxes, and bus relay. L-com's LC3MSA00478-48 MIL-STD-1553 flexible RF cable assembly is available with PE dielectric. Our TRB 3-slot plug to TRB 3-lug jack cable has bayonet coupling connectors made of brass with nickel plating. This RF flexible 30-02003-LC twinax cable operates between -20 and 75 degrees Celsius.L-com has one of the largest in-stock selections of MIL-STD-1553 flexible RF cable assembly with same-day shipment for domestic and international orders. We are a global leader of wired and wireless connectivity products, offering a wide range of solutions across many key industries, including electronics, medical, industrial automation, military, and telecommunication. For further information on similar products, our expert technical support and trained sales team can get you the perfect TRB 3-slot plug to TRB 3-lug jack cable as per your requirements.
LCCN45884
Cable Termination Non-Magnetic Straight PCB Mount type Connector LCCN45884 from L-Com is in stock at our warehouse and ready to ship on the same-day of your order. The LCCN45884 is a cable termination Non-magnetic straight PCB mount type Connector compatible with 0.047 cable. These Non-Magnetic Connector frequency ranges from 0-3 GHz with 50 Ohms impedance. Our RF coaxial connector specialists are available to answer any questions or concerns you have on the LCCN45884 Cable Termination Non-Magnetic Right-Angle PCB Mount. Our Non-magnetic connectors have a susceptibility of around 10⁻⁵, as opposed to 10ˉ² for standard connectors made of brass/nickel materials. As a result, our non-magnetic connectors are transparent to the magnetic field, which means no field distortion and a higher Signal-to-Noise Ratio (SNR). Contact L-Com’s expert technical support for assistance with the Cable Termination Non-Magnetic straight PCB mount type Connector or any RF coaxial cable connectors or cable assemblies. Download our LCCN45884 datasheet with specifications and CAD drawing with dimensions for details. Our knowledgeable sales team simplifies the purchasing process and ensures that your cable termination Non-magnetic RF coaxial connector will be exact to your specifications. The target audience for the straight coaxial is for quantum computing, the military and aerospace industries as well as the medical industry including MRI and patient monitoring devices. The LCCN45884 connector from L-Com uses a dedicated manufacturing process and raw material selection to guarantee the low magnetic susceptibility level of the connectors. The Cable Termination straight RF coax connector is available now from L-Com. We have no MOQ (minimum order quantity) and the connector ships the very same day from our warehouse.
22511639
Sucoform hand-formable microwave cables have a tin-soaked copper braid for the outer conductor, giving them outstanding hand-formability and a distinct mechanical advanatage over semi-rigid cables
FMC0115600
N Male to 7/16 DIN Male Cable LMR-600 Coax
Pencarian MPN Mendukung pencocokan tepat, awalan, dan sebagian. ⌄
Sanggahan
Cstone adalah pabrik profesional, bukan perusahaan dagang, untuk konektor RF dan koaksial, adaptor, serta rakitan kabel termasuk N-type, BNC, SMA, SMP, SSMB, dan MMCX. Kami memproduksi konektor berdasarkan gambar 2D atau sampel; kesesuaian, MOQ, waktu pengiriman, dan detail produksi dikonfirmasi melalui RFQ. Cstone Technology tidak berafiliasi dengan merek asli. Nama produsen, merek dagang, simbol, dan nomor komponen digunakan hanya untuk identifikasi dan referensi silang. Merek dagang tetap menjadi milik pemiliknya masing-masing. Kesesuaian akhir dikonfirmasi melalui tinjauan gambar/spesifikasi selama RFQ.