Detail produk
Snap-On MMBX Plug to Reverse Polarity SMA Female Bulkhead Cable Using RG316-DS Coax
Nomor komponen (MPN)
Impedansi
50 Ohm
Antarmuka
MMBX
rakitan kabel RF kustom dari gambar untuk sourcing produksi
rakitan kabel RF kustom dari gambar berorientasi produksi dengan review kompatibilitas, panduan MOQ, dan dukungan sourcing cost-down.
Apa yang harus disiapkan sebelum RFQ Input yang jelas mengurangi dugaan dan mempercepat jawaban yang berguna. ⌄
- • Bagikan MPN referensi, komponen pasangan, atau merek asal jika relevan untuk peninjauan.
- • Tambahkan BOM, pembagian kuantitas, dan permintaan tahunan jika proyek melewati tahap prototipe.
- • Lampirkan gambar, lembar data, atau persyaratan kritis untuk impedansi, frekuensi, pemasangan, dan pelapisan.
Gambar
Klik untuk memperbesar.
Specifications
| Antarmuka | Cable Assemblies |
|---|---|
| Antarmuka | RG316-DS |
| Antarmuka | MMBX |
| Antarmuka | SMA |
| Impedansi | 50 Ohm |
| Impedansi | 50 Ohm |
| Impedansi | 50 Ohm |
| Jenis kelamin konektor | Plug |
| Jenis kelamin konektor | Female |
| Orientasi | Straight |
| Orientasi | Straight |
| Connector Polarity 1 | Standard |
Show 5 more specs
| Pemasangan | None |
|---|---|
| Connector Polarity 2 | Reverse Polarity |
| Pemasangan | Bulkhead |
| Jenis kabel | RG316-DS |
| Category | Cable Assemblies |
Deskripsi
Data referensi untuk PE3C4054 saat ini mencakup: MMBX · 50 Ohm · Bulkhead. Katalog saat ini mencantumkan konfigurasi sebagai: Straight. Impedansi tercantum sebagai 50 Ohm. Jika parameter ini kritis, konfirmasikan kembali dalam RFQ. Pemasangan tercantum sebagai Bulkhead. Jika batasan panel, pemasangan tembus panel, atau flensa penting, kirim dimensinya bersama RFQ. Halaman ini untuk peninjauan dan penyaringan awal; bukan persetujuan akhir.
Gunakan halaman ini untuk menyaring kandidat sebelum RFQ. Jalur pasokan dan produksi kustom MOQ 200+ dikonfirmasi setelah peninjauan gambar/spesifikasi/BOM.
Konektor serupa
Anda mungkin juga tertarik pada model berikut:
095-902-515-036
RP-SMA lurus jack ke RP-SMA lurus plug RG-58 50 Ω 36 inches
LCCA30050-FT3
L-com low loss SMA male right angle to SMA male right angle cable assembly with heavy duty heat shrink boot using LL335i coax, 3 FT is available for same day shipping from our facility. This high quality SMA cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30050-FT3 SMA cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF low loss coaxial cable assemblies are built with right angle SMA connection on one end and right angle SMA connection on the other. This low lossright angle SMA to right angle SMA cable from L-com has a male to male gender combination. Our SMA male to SMA male coaxial assembly part number LCCA30050-FT3 can also be known as low loss right angle SMA plug to right angle SMA plug cable assembly when using alternate gender names. SMA plug to SMA plug cable assembly LCCA30050-FT3 is manufactured with a flexible coax. These flexible SMA to SMA cable assemblies use LL335i coax and are triple shielded. L-com triple shielded low loss SMA male right angle to SMA male right angle cable assembly with heavy duty heat shrink boot using LL335i coax, 3 FT is built from quality components by skilled assemblers with many years of experience.Maximum frequency for these SMA to SMA M/M cables is 18 GHz. Technical performance specifications on these 18 GHz SMA right angle male to SMA right angle male cables are located on the LCCA30050-FT3 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day.Low loss SMA male right angle to SMA male right angle cable assembly with heavy duty heat shrink boot using LL335i coax, 3 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our right angle SMA to right angle SMA cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our low loss SMA male right angle to SMA male right angle cable assembly with heavy duty heat shrink boot using LL335i coax, 3 FT.
LCCA30485-FT10
L-com N male to SMA female bulkhead cable assembly using LC141TBJ coax, 10 FT is available for same day shipping from our facility. This high quality N cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30485-FT10 N cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF coaxial cable assemblies are built with N connection on one end and SMA bulkhead connection on the other. This N to SMA cable from L-com has a male to female gender combination. Our N male to SMA female coaxial assembly part number LCCA30485-FT10 can also be known as N plug to SMA jack cable assembly when using alternate gender names. N plug to SMA jack cable assembly LCCA30485-FT10 is manufactured with a formable coax.Maximum frequency for these N to SMA M/F cables is 11 GHz. Technical performance specifications on these 11 GHz N male to SMA female bulkhead cables are located on the LCCA30485-FT10 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a SMA female bulkhead to N male cable assembly because it can be used in the opposite direction.N male to SMA female bulkhead cable assembly using LC141TBJ coax, 10 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our N to SMA cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our N male to SMA female bulkhead cable assembly using LC141TBJ coax, 10 FT.
PE3C1101
N Female Bulkhead to SMA Male Low Loss Cable Using LMR-100 Coax
SMA8100D-9316
SMA jack crimp right angle for RD316,RD316-FEP; 6GHz VSWR1.25
901-9842
SMA lurus Round Post jack 50 Ω
Pencarian MPN Mendukung pencocokan tepat, awalan, dan sebagian. ⌄
Sanggahan
Nama produsen, merek dagang, simbol, dan nomor komponen digunakan hanya untuk identifikasi dan referensi silang. Cstone Technology adalah mitra pengadaan ekspor berbasis di Tiongkok untuk alternatif yang kompatibel dan tidak berafiliasi dengan merek asli. Merek dagang tetap menjadi milik pemiliknya masing-masing. Kesesuaian akhir dikonfirmasi melalui tinjauan gambar/spesifikasi selama RFQ.