Detail produk
7/16 DIN Male to 7/16 DIN Male Cable Using RG400 Coax, RoHS
Nomor komponen (MPN)
Impedansi
50
Antarmuka
7/16 DIN
rakitan kabel RF kustom dari gambar untuk sourcing produksi
rakitan kabel RF kustom dari gambar berorientasi produksi dengan review kompatibilitas, panduan MOQ, dan dukungan sourcing cost-down.
Apa yang harus disiapkan sebelum RFQ Input yang jelas mengurangi dugaan dan mempercepat jawaban yang berguna. ⌄
- • Bagikan MPN referensi, komponen pasangan, atau merek asal jika relevan untuk peninjauan.
- • Tambahkan BOM, pembagian kuantitas, dan permintaan tahunan jika proyek melewati tahap prototipe.
- • Lampirkan gambar, lembar data, atau persyaratan kritis untuk impedansi, frekuensi, pemasangan, dan pelapisan.
Gambar
Klik untuk memperbesar.
Specifications
| Antarmuka | Cable Assemblies |
|---|---|
| Antarmuka | RG400 |
| Antarmuka | 7/16 DIN |
| Antarmuka | 7/16 DIN |
| Impedansi | 50 |
| Impedansi | 50 |
| Impedansi | 50 |
| Jenis kelamin konektor | Male |
| Jenis kelamin konektor | Male |
| Orientasi | Straight |
| Orientasi | Straight |
| Connector Polarity 1 | Standard |
Show 5 more specs
| Pemasangan | None |
|---|---|
| Connector Polarity 2 | Standard |
| Pemasangan | None |
| Jenis kabel | RG400/U |
| Category | Cable Assemblies |
Deskripsi
Data referensi untuk PE34360LF saat ini mencakup: 7/16 DIN · 50 · Straight. Katalog saat ini mencantumkan konfigurasi sebagai: Straight. Impedansi tercantum sebagai 50. Jika parameter ini kritis, konfirmasikan kembali dalam RFQ. Jika data pemasangan tidak ada di sini, konfirmasikan dari gambar atau kebutuhan pasangan konektor. Halaman ini untuk peninjauan dan penyaringan awal; bukan persetujuan akhir.
Gunakan halaman ini untuk menyaring kandidat sebelum RFQ. Jalur pasokan dan produksi kustom MOQ 200+ dikonfirmasi setelah peninjauan gambar/spesifikasi/BOM.
Konektor serupa
Anda mungkin juga tertarik pada model berikut:
LCCA30174-FT6
L-com's LCCA30174-FT6 is a low loss N male to N female bulkhead cable assembly using LMR-240 coax, 6 FT with Times Microwave components and ships same-day. The LMR-240 coax of this N cable uses the PE (F) dielectric with a VoP of 84%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com N to N cable assembly has a male to female gender configuration with flexible LMR-240 series coax and operates to 5.8 GHz. The double shield of this N cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. L-com's RF cable assembly with N bulkhead interface enables system designers to have external connections on their product enclosures or to be used for other rack mount and panel mount applications. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N male to N female cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30174-FT6 L-com Low Loss N Male to N Female Bulkhead Cable Assembly using LMR-240 Coax, 6 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
LC3MP2268-12
The L-com LC3MP2268-12 MIL-STD-1553 flexible RF cable assembly is perfect for applications that need tight bends and flexible cable. This TRB 3-slot to TRB 3-lug cable assembly is plug to jack and made of 78 ohm flexible 30-02001-LC twinax. Our 78 Ohm cable assembly is available with a PVC jacket and a copper inner conductor with silver plating. We offer a blue, 0.69-inch long TRB 3-slot to TRB 3-lug cable that operates at 400 MHz.This blue RF cable assembly is the most commonly utilized cable assembly in wide connectivity applications such as bus couplers, avionics control boxes, and bus relay. L-com's LC3MP2268-12 MIL-STD-1553 flexible RF cable assembly is available with PE dielectric. Our TRB 3-slot plug to TRB 3-lug jack cable has bayonet coupling connectors made of brass with nickel plating. This RF flexible 30-02001-LC twinax cable operates between -20 and 75 degrees Celsius.L-com has one of the largest in-stock selections of MIL-STD-1553 flexible RF cable assembly with same-day shipment for domestic and international orders. We are a global leader of wired and wireless connectivity products, offering a wide range of solutions across many key industries, including electronics, medical, industrial automation, military, and telecommunication. For further information on similar products, our expert technical support and trained sales team can get you the perfect TRB 3-slot plug to TRB 3-lug jack cable as per your requirements.
2.4J-K292P
The 2.4J-K292P is an In/Between Series Adaptors . This connector is suitable for various high-frequency applications. It features a impedance 50Ω, operates up to 40GHz, and has a rated voltage of AC 160V, ensures a high insulation resistance (1000MΩ(Min.) at DC 500V), a low contact resistance (Between inner conductors: 4.0 mΩ(Max.)（2.4mm）/ 3.0 mΩ(Max.)（2.92mm）between outer conductors: 2.5 mΩ(Max.)（2.4mm）/ 2.0 mΩ(Max.)（2.92mm）, and an excellent V.S.W.R 1.25(Max.) at DC~40GHz. The contact is made of Beryllium Copper/Gold Plating, while the body is Stainless/Passivate Treatment. We can customize our products for you. We offer total customization, including changes to a product's shape, length, material, surface treatment, and packaging. Available from 1 piece for in-stock items.
7000-12341-0140500
Circular DIN konektor M12 female 90 dengan kabel, PVC 4x0.34 ye UL / CSA 5m
NP-8/U
The NP-8/U is an N Straight Plug connector, designed for coaxial cables. This connector is suitable for various high-frequency applications.Fits RG-8/U,RG-11/U,RG-214/U,6D-FBW cables. It features a impedance 50Ω, operates up to 10 GHz, and has a rated voltage of AC 500V, ensures a high insulation resistance (1000MΩ(Min.) at DC 500V), a low contact resistance (3 mΩ(Max.). Withstanding temperatures from -40 to +85°C. The contact is made of Brass/Gold-Plated/Soldered, while the body is Brass/Nickel Plating/Tightening. We can customize our products for you. We offer total customization, including changes to a product's shape, length, material, surface treatment, and packaging. Available from 1 piece for in-stock items.
LCCA30212-FT3
L-com's LCCA30212-FT3 is a low loss N male to N male cable assembly using LMR-600 coax, 3 FT with Times Microwave components and ships same-day. The LMR-600 coax of this N cable uses the PE (F) dielectric with a VoP of 87%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com N to N cable assembly has a male to male gender configuration with flexible LMR-600 series coax and operates to 5.8 GHz. The double shield of this N cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N male to N male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30212-FT3 L-com Low Loss N Male to N Male Cable Assembly using LMR-600 Coax, 3 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
Pencarian MPN Mendukung pencocokan tepat, awalan, dan sebagian. ⌄
Sanggahan
Nama produsen, merek dagang, simbol, dan nomor komponen digunakan hanya untuk identifikasi dan referensi silang. Cstone Technology adalah mitra pengadaan ekspor berbasis di Tiongkok untuk alternatif yang kompatibel dan tidak berafiliasi dengan merek asli. Merek dagang tetap menjadi milik pemiliknya masing-masing. Kesesuaian akhir dikonfirmasi melalui tinjauan gambar/spesifikasi selama RFQ.