Detail produk
The L-com ANM-1400 is a TNC Male Reverse Thread Crimp connector made for use with RG8 and 400-series cable. This connector is compatible with RG8‚ WBC-400‚ LMR®400‚ Belden 9913 and Belden 7810 cable types. This part utilizes reverse threading on the inner part of the connector to make for easier mating. This connector is ideal for Wireless, WLAN and other generic Low Loss Coaxial applications. This connector is tested to MIL-Std. 202 for various environmental factors. The temperature range of the ANM-1202 is -55C to +85C. Order online today!
Nomor komponen (MPN)
Impedansi
50 Ohm
Frekuensi
DC
Antarmuka
TNC
rakitan kabel RF kustom dari gambar untuk sourcing produksi
rakitan kabel RF kustom dari gambar berorientasi produksi dengan review kompatibilitas, panduan MOQ, dan dukungan sourcing cost-down.
Apa yang harus disiapkan sebelum RFQ Input yang jelas mengurangi dugaan dan mempercepat jawaban yang berguna. ⌄
- • Bagikan MPN referensi, komponen pasangan, atau merek asal jika relevan untuk peninjauan.
- • Tambahkan BOM, pembagian kuantitas, dan permintaan tahunan jika proyek melewati tahap prototipe.
- • Lampirkan gambar, lembar data, atau persyaratan kritis untuk impedansi, frekuensi, pemasangan, dan pelapisan.
Gambar
Klik untuk memperbesar.
Specifications
| Antarmuka | RG8 |
|---|---|
| Antarmuka | 400-Series |
| Antarmuka | WBC400 |
| Antarmuka | CA-400 |
| Antarmuka | Belden 9913 |
| Antarmuka | Belden 7810 |
| Antarmuka | Coaxial Connectors |
| Antarmuka | TNC |
| Impedansi | 50 Ohm |
| Frekuensi (maks) | DC |
| Frekuensi (maks) | 11 GHz |
| Jenis kelamin konektor | Male |
Show 6 more specs
| Body Style | Straight |
|---|---|
| Polarity | Standard |
| Pemasangan | None |
| Category | Coaxial Connectors |
| Application | Low Loss Coax Applications; Radio Pigtails; RF Applications; Wi-Fi Applications; WLAN |
| Product Features | Can be used with RG8‚ WBC400‚ LMR®400‚ HyperLink CA-400, Belden 9913, 7810 cable types; Must be Purchased in Increments of 10 |
Deskripsi
Data referensi untuk ATML-1400 saat ini mencakup: TNC · 50 Ohm · DC. Impedansi tercantum sebagai 50 Ohm. Jika parameter ini kritis, konfirmasikan kembali dalam RFQ. Frekuensi tercantum sebagai DC. Batas operasi sebenarnya tetap bergantung pada rakitan, pasangan konektor, dan konteks aplikasi. Jika data pemasangan tidak ada di sini, konfirmasikan dari gambar atau kebutuhan pasangan konektor. Halaman ini untuk peninjauan dan penyaringan awal; bukan persetujuan akhir.
Gunakan halaman ini untuk menyaring kandidat sebelum RFQ. Jalur pasokan dan produksi kustom MOQ 200+ dikonfirmasi setelah peninjauan gambar/spesifikasi/BOM.
Konektor serupa
Anda mungkin juga tertarik pada model berikut:
TNC8975-0012
2 Watt 75ohm TNC jack termination 12GHz VSWR1.2
TNC8105T-0142
TNC isolated jack crimp bulkhead for RG142,RG400
LCCA30280-FT2
L-com's LCCA30280-FT2 is a low loss N male to TNC male right angle cable assembly using LMR-240-DB coax, 2 FT with Times Microwave components and ships same-day. The LMR-240-DB coax of this N cable uses the PE (F) dielectric with a VoP of 84%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com N to TNC cable assembly has a male to male gender configuration with flexible LMR-240-DB series coax and operates to 5.8 GHz. The double shield of this N cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. This right angle TNC cable interface on the LMR-240-DB coax allows for easier connections in tight spaces. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N male to N male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30280-FT2 L-com Low Loss N Male to TNC Male Right Angle Cable Assembly using LMR-240-DB Coax, 2 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
LCCA30590-FT1
L-com N female bulkhead to TNC female cable assembly using LC085TB coax, 1 FT is available for same day shipping from our facility. This high quality N cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30590-FT1 N cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF coaxial cable assemblies are built with N bulkhead connection on one end and TNC connection on the other. This N to TNC cable from L-com has a female to female gender combination. Our N female to TNC female coaxial assembly part number LCCA30590-FT1 can also be known as N jack to TNC jack cable assembly when using alternate gender names. N jack to TNC jack cable assembly LCCA30590-FT1 is manufactured with a formable coax. These formable N to TNC cable assemblies use LC085TB coax and are single shielded. L-com single shielded N female bulkhead to TNC female cable assembly using LC085TB coax, 1 FT is built from quality components by skilled assemblers with many years of experience.Maximum frequency for these N to TNC F/F cables is 6 GHz. Technical performance specifications on these 6 GHz N femalebulkhead to TNC female cables are located on the LCCA30590-FT1 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a TNC female to N female bulkhead cable assembly because it can be used in the opposite direction.N female bulkhead to TNC female cable assembly using LC085TB coax, 1 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our N to TNC cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our N female bulkhead to TNC female cable assembly using LC085TB coax, 1 FT.
LCCA30703-FT1
L-com N male right angle to TNC male cable assembly using RG58 coax, 1 FT is available for same day shipping from our facility. This high quality N cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30703-FT1 N cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF coaxial cable assemblies are built with right angle N connection on one end and TNC connection on the other. This right angle N to TNC cable from L-com has a male to male gender combination. Our N male to TNC male coaxial assembly part number LCCA30703-FT1 can also be known as right angle N plug to TNC plug cable assembly when using alternate gender names. N plug to TNC plug cable assembly LCCA30703-FT1 is manufactured with a flexible coax. These flexible N to TNC cable assemblies use RG58 coax and are single shielded. L-com single shielded N male right angle to TNC male cable assembly using RG58 coax, 1 FT is built from quality components by skilled assemblers with many years of experience.Maximum frequency for these N to TNC M/M cables is 1 GHz. Technical performance specifications on these 1 GHz N right angle male to TNC male cables are located on the LCCA30703-FT1 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a TNC male to right angle N male cable assembly because it can be used in the opposite direction.N male right angle to TNC male cable assembly using RG58 coax, 1 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our right angle N to TNC cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our N male right angle to TNC male cable assembly using RG58 coax, 1 FT.
SCE18110303
Low Loss TNC Male to TNC Male Cable LL142 Coax with LF Solder
Pencarian MPN Mendukung pencocokan tepat, awalan, dan sebagian. ⌄
Sanggahan
Cstone adalah pabrik profesional, bukan perusahaan dagang, untuk konektor RF dan koaksial, adaptor, serta rakitan kabel termasuk N-type, BNC, SMA, SMP, SSMB, dan MMCX. Kami memproduksi konektor berdasarkan gambar 2D atau sampel; kesesuaian, MOQ, waktu pengiriman, dan detail produksi dikonfirmasi melalui RFQ. Cstone Technology tidak berafiliasi dengan merek asli. Nama produsen, merek dagang, simbol, dan nomor komponen digunakan hanya untuk identifikasi dan referensi silang. Merek dagang tetap menjadi milik pemiliknya masing-masing. Kesesuaian akhir dikonfirmasi melalui tinjauan gambar/spesifikasi selama RFQ.