Detail produk
The S-seri is a line of cost-efficient, low loss microwave kabel, characterised by their very low insertion loss across a wide frequency range. S-seri kabel are made dengan environmentally-friendly, halogen-free materials.
Nomor komponen (MPN)
Frekuensi
≤ 7.5 GHz
Apa yang harus disiapkan sebelum RFQ Input yang jelas mengurangi dugaan dan mempercepat jawaban yang berguna. ⌄
- • Bagikan MPN referensi, mating part, atau merek asal jika relevan untuk review.
- • Tambahkan BOM, pembagian kuantitas, dan permintaan tahunan jika proyek melampaui volume prototipe.
- • Lampirkan gambar, datasheet, atau persyaratan kritis untuk impedansi, frekuensi, pemasangan, dan pelapisan.
Image
Click to enlarge.
Specifications
| Frekuensi (maks) | ≤ 7.5 GHz |
|---|---|
| Centre conductor | Aluminium / tembaga |
| Dielectric | SPE (Foamed Polyethylene) |
| Outer conductor | tembaga |
| Jenis kelamin konektor | PE (Polyethylene) |
| Impedansi | 50 Ω + / -2Ω |
| Kapasitansi | 77 pF / m |
| Inductance | 0.248 µH / m |
| Velocity of signal propagation | 87 % |
| Signal delay | 3.85 ns / m |
| Screening effectiveness | 90 dB at frequency 0.001 GHz ... 7.5 GHz |
| Insulation resistance | 100000000 MΩ*m |
Show 15 more specs
| Inner conductor resistance | 2.3 Ω / km |
|---|---|
| Outer conductor resistance | 3.9 Ω / km |
| Operating Voltage (at sea level) | ≤ 1.5 kVrms |
| Phase vs temperature | 3000 ppm within the temperature range -40 ... 70 °C |
| Phaase vs bending | 2 ° / GHz |
| Test voltage (50 Hz / 1 min) | ≤ 3 kVrms |
| Weight | approx. 150 g / m |
| Static bending radius | ≥ 100 mm |
| Repeated bending radius | 200 mm |
| Operation temperature | -40 °C ... 85 °C |
| Installation temperature | -20 °C ... 60 °C |
| Fire characteristics | free of halogenes, acc. standar IEC 60754 |
| Directive | RoHS 2011 / 65 / EU dan (EU) 2015 / 863 |
| Rating | Free of SVHC >0,1% |
| Regulation | REACH 1907 / 2006 Article 33 SVHC |
Deskripsi
Data referensi untuk 22512320 saat ini mencakup: ≤ 7.5 GHz. Frequency is listed as ≤ 7.5 GHz. The real operating limit still depends on the assembly, mating pair, and application context. For higher-frequency projects, include the drawing, cable path, and critical requirements in the first RFQ. If mounting is missing here, confirm it from the drawing or mating requirement. Halaman ini untuk review dan shortlisting. Konfirmasi akhir kesesuaian, MOQ, dan waktu pengiriman diberikan setelah review gambar, spesifikasi, atau BOM.
Gunakan halaman ini untuk shortlist sebelum RFQ. Produksi kustom MOQ 200+ dikonfirmasi setelah review gambar/spesifikasi/BOM.
Similar Connectors
You might also be interested in these models:
SM4740
SMA female (jack) ke TNC female (jack) Bulkhead adaptor, Passivated baja tahan karat Body, tinggi Temp, 1.35 VSWR
1731110559
SM8854
2.92 mm female (jack) ke SMP male (plug) Full Detent adaptor, tinggi Temp, 1.25 VSWR
SA18N100-10
10 dB Fixed Attenuator N male (plug) ke N female (jack) Directional Up ke 18 GHz Rated ke 100 Watts, Heatsink Body, 1.35 VSWR
ST1850
SMA male (plug) Termination (Load) 2 Watts ke 18 GHz, emas berlapis baja tahan karat, 1.2 VSWR, 500 Watts Peak Power
92602995
The 4 fiber OutDoorConnector integrates the single fiber technology into the mechanical reliability of the market proven RF N-Interface.
Pencarian MPN Mendukung pencocokan tepat, awalan, dan sebagian. ⌄
Sanggahan
Nama produsen, merek dagang, simbol, dan nomor komponen digunakan hanya untuk identifikasi dan referensi silang. Cstone Technology adalah mitra pengadaan ekspor berbasis di Tiongkok untuk alternatif yang kompatibel dan tidak berafiliasi dengan merek asli. Merek dagang tetap menjadi milik pemiliknya masing-masing. Kesesuaian akhir dikonfirmasi melalui tinjauan gambar/spesifikasi selama RFQ.