Detail produk
RP-TNC lurus crimp jack RG-58 RG-141 Times LMR-195 50 Ω
Nomor komponen (MPN)
Impedansi
50
Frekuensi
11
rakitan kabel RF kustom dari gambar untuk sourcing produksi
rakitan kabel RF kustom dari gambar berorientasi produksi dengan review kompatibilitas, panduan MOQ, dan dukungan sourcing cost-down.
Apa yang harus disiapkan sebelum RFQ Input yang jelas mengurangi dugaan dan mempercepat jawaban yang berguna. ⌄
- • Bagikan MPN referensi, komponen pasangan, atau merek asal jika relevan untuk peninjauan.
- • Tambahkan BOM, pembagian kuantitas, dan permintaan tahunan jika proyek melewati tahap prototipe.
- • Lampirkan gambar, lembar data, atau persyaratan kritis untuk impedansi, frekuensi, pemasangan, dan pelapisan.
Gambar
Klik untuk memperbesar.
Specifications
| Antarmuka | RG-58, RG-141, Times LMR-195, Times LMR-200-LLPL, Belden 7806A, Belden 8219, Belden 8240, Belden 8259, Belden 8262, Belden 9201, Belden 9203, Belden 9310, Belden 9311 |
|---|---|
| Frekuensi (maks) | 11 |
| Jenis kelamin konektor | Jack |
| Pemasangan | Tidak berlaku |
| Finishing bodi | Nikel |
| Material bodi | Kuningan |
| Finishing kontak | Emas |
| Material kontak | Kuningan |
| Terminasi kontak | Crimp |
| Mekanisme coupling | Threaded |
| Terminasi | 47-10070 |
| Export Control Classification Number | EAR99 |
Show 14 more specs
| Rating IP | Not Rated |
|---|---|
| Impedansi | 50 |
| Material isolator | PTFE |
| Terisolasi | Tidak |
| Low PIM | Tidak |
| Mil Qualified | Tidak bersertifikasi MIL |
| Non-magnetik | Tidak |
| Orientasi | Lurus |
| Ports | 1 (Single Port) |
| Size Category | Miniature |
| Temp (Max Degrees Celsius) | 165 |
| Temp (Min Degrees Celsius) | -65 |
| Gaya terminasi | kabel - crimp |
| Arah ulir | standar |
Deskripsi
Data referensi untuk 122122RP saat ini mencakup: 50 · 11 · Tidak berlaku. Katalog saat ini mencantumkan konfigurasi sebagai: 47-10070. Impedansi tercantum sebagai 50. Jika parameter ini kritis, konfirmasikan kembali dalam RFQ. Frekuensi tercantum sebagai 11. Batas operasi sebenarnya tetap bergantung pada rakitan, pasangan konektor, dan konteks aplikasi. Untuk proyek frekuensi tinggi, sertakan gambar, jalur kabel, dan persyaratan kritis dalam RFQ pertama. Pemasangan tercantum sebagai Tidak berlaku. Jika batasan panel, pemasangan tembus panel, atau flensa penting, kirim dimensinya bersama RFQ. Material tercantum sebagai Kuningan. Ini membantu peninjauan, tetapi tidak menggantikan konfirmasi struktur proyek secara penuh. Katalog juga mencantumkan nilai penyegelan atau perlindungan Not Rated. Cocokkan dengan kebutuhan lingkungan sebenarnya dalam RFQ. Halaman ini untuk peninjauan dan penyaringan awal; bukan persetujuan akhir.
Gunakan halaman ini untuk menyaring kandidat sebelum RFQ. Jalur pasokan dan produksi kustom MOQ 200+ dikonfirmasi setelah peninjauan gambar/spesifikasi/BOM.
Konektor serupa
Anda mungkin juga tertarik pada model berikut:
TNC-R
The TNC-R is an TNC Receptacle. This connector is suitable for various high-frequency applications. It features a impedance 50Ω, operates up to 4 GHz, and has a rated voltage of AC 500V, ensures a high insulation resistance (1000MΩ(Min.) at DC 500V), a low contact resistance (3 mΩ(Max.). Withstanding temperatures from -40 to +85°C. The contact is made of Phosphor Bronze/Gold Plating, while the body is Brass/Nickel Plating. Terminal Shape is solder. We can customize our products for you. We offer total customization, including changes to a product's shape, length, material, surface treatment, and packaging.
LCCA30280-FT3
L-com's LCCA30280-FT3 is a low loss N male to TNC male right angle cable assembly using LMR-240-DB coax, 3 FT with Times Microwave components and ships same-day. The LMR-240-DB coax of this N cable uses the PE (F) dielectric with a VoP of 84%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com N to TNC cable assembly has a male to male gender configuration with flexible LMR-240-DB series coax and operates to 5.8 GHz. The double shield of this N cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. This right angle TNC cable interface on the LMR-240-DB coax allows for easier connections in tight spaces. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N male to N male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30280-FT3 L-com Low Loss N Male to TNC Male Right Angle Cable Assembly using LMR-240-DB Coax, 3 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
T30T85-316-
TNC plug ke TNC jack bulkhead using RG316
85091699
TNC connectors are threaded RF connectors applicable from DC up to 18 GHz
095-850-306-036
RP-TNC Straight Plug to TNC Straight Plug LMR-240-UF 50 Ohm 36 Inches
LCCA30655-FT10
L-com N female bulkhead to TNC male right angle cable assembly using LC085TBJ coax, 10 FT is available for same day shipping from our facility. This high quality N cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30655-FT10 N cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF coaxial cable assemblies are built with N bulkhead connection on one end and right angle TNC connection on the other. This N to right angle TNC cable from L-com has a female to male gender combination. Our N female to TNC male coaxial assembly part number LCCA30655-FT10 can also be known as N jack to right angle TNC plug cable assembly when using alternate gender names. N jack to TNC plug cable assembly LCCA30655-FT10 is manufactured with a formable coax. These formable N to TNC cable assemblies use LC085TBJ coax and are single shielded. L-com single shielded N female bulkhead to TNC male right angle cable assembly using LC085TBJ coax, 10 FT is built from quality components by skilled assemblers with many years of experience.Maximum frequency for these N to TNC F/M cables is 6 GHz. Technical performance specifications on these 6 GHz N femalebulkhead to TNC right angle male cables are located on the LCCA30655-FT10 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a right angle TNC male to N female bulkhead cable assembly because it can be used in the opposite direction.N female bulkhead to TNC male right angle cable assembly using LC085TBJ coax, 10 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our N to right angle TNC cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our N female bulkhead to TNC male right angle cable assembly using LC085TBJ coax, 10 FT.
Pencarian MPN Mendukung pencocokan tepat, awalan, dan sebagian. ⌄
Sanggahan
Cstone adalah pabrik profesional, bukan perusahaan dagang, untuk konektor RF dan koaksial, adaptor, serta rakitan kabel termasuk N-type, BNC, SMA, SMP, SSMB, dan MMCX. Kami memproduksi konektor berdasarkan gambar 2D atau sampel; kesesuaian, MOQ, waktu pengiriman, dan detail produksi dikonfirmasi melalui RFQ. Cstone Technology tidak berafiliasi dengan merek asli. Nama produsen, merek dagang, simbol, dan nomor komponen digunakan hanya untuk identifikasi dan referensi silang. Merek dagang tetap menjadi milik pemiliknya masing-masing. Kesesuaian akhir dikonfirmasi melalui tinjauan gambar/spesifikasi selama RFQ.