उत्पाद विवरण
4.1/9.5 Mini DIN Female to 7/16 DIN Male Right Angle Low PIM Cable Using TFT-402 Coax Using Times Microwave Components
पार्ट नंबर (MPN)
प्रतिबाधा
50 Ohm
इंटरफ़ेस
4.1/9.5 Mini DIN
drawing से custom RF cable assembly के लिए production sourcing
Compatibility review, MOQ guidance और cost-down sourcing support के साथ production-oriented drawing से custom RF cable assembly।
RFQ से पहले क्या तैयार करें स्पष्ट इनपुट अनुमान कम करते हैं और उपयोगी उत्तर को तेज़ करते हैं। ⌄
- • समीक्षा के लिए प्रासंगिक हो तो संदर्भ MPN, मिलान वाला पार्ट या स्रोत ब्रांड साझा करें।
- • यदि परियोजना प्रोटोटाइप मात्रा से आगे है तो BOM, मात्रा विभाजन और वार्षिक मांग जोड़ें।
- • ड्रॉइंग, डेटा शीट या प्रतिबाधा, आवृत्ति, माउंटिंग और प्लेटिंग की महत्वपूर्ण आवश्यकताएँ संलग्न करें।
चित्र
बड़ा करने के लिए क्लिक करें।
Specifications
| इंटरफ़ेस | Cable Assemblies |
|---|---|
| इंटरफ़ेस | TFT-402 |
| इंटरफ़ेस | 4.1/9.5 Mini DIN |
| इंटरफ़ेस | 7/16 DIN |
| प्रतिबाधा | 50 Ohm |
| प्रतिबाधा | 50 Ohm |
| प्रतिबाधा | 50 Ohm |
| जेंडर | Female |
| जेंडर | Male |
| ओरिएंटेशन | Straight |
| ओरिएंटेशन | Right Angle |
| Connector Polarity 1 | Standard |
Show 5 more specs
| माउंटिंग | None |
|---|---|
| Connector Polarity 2 | Standard |
| माउंटिंग | None |
| केबल प्रकार | TFT-402 |
| Category | Cable Assemblies |
विवरण
PE3C8230 के लिए मौजूदा संदर्भ डेटा: 4.1/9.5 Mini DIN · 50 Ohm · Straight। कैटलॉग में कॉन्फ़िगरेशन इस प्रकार दिया गया है: Straight। प्रतिबाधा 50 Ohm दी गई है। यदि यह पैरामीटर महत्वपूर्ण है, तो RFQ में फिर से पुष्टि करें। यदि यहाँ माउंटिंग जानकारी नहीं है, तो उसे ड्रॉइंग या मिलान आवश्यकता से पुष्टि करें। इस पृष्ठ का उपयोग RFQ से पहले चयन सूची बनाने के लिए करें; यह अंतिम स्वीकृति नहीं है।
RFQ से पहले उम्मीदवार चुनने के लिए इस पृष्ठ का उपयोग करें। MOQ 200+ आपूर्ति मार्ग और कस्टम उत्पादन मार्ग ड्रॉइंग/विनिर्देश/BOM समीक्षा के बाद पुष्टि होते हैं।
समान कनेक्टर
आपको ये मॉडल भी रुचिकर लग सकते हैं:
T3486-018
Circular DIN कनेक्टर पुरुष रीसेप्टेकल 7 WAY
LCCA30202-FT1
L-com's LCCA30202-FT1 is a low loss N male to N male cable assembly using LMR-400-DB coax, 1 FT with Times Microwave components and ships same-day. The LMR-400-DB coax of this N cable uses the PE (F) dielectric with a VoP of 85%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com N to N cable assembly has a male to male gender configuration with flexible LMR-400-DB series coax and operates to 6 GHz. The double shield of this N cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N male to N male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30202-FT1 L-com Low Loss N Male to N Male Cable Assembly using LMR-400-DB Coax, 1 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
1212080083
Circular DIN कनेक्टर प्रकार B IND TRANSPARENT C4 230V
LCCA30174-FT6
L-com's LCCA30174-FT6 is a low loss N male to N female bulkhead cable assembly using LMR-240 coax, 6 FT with Times Microwave components and ships same-day. The LMR-240 coax of this N cable uses the PE (F) dielectric with a VoP of 84%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com N to N cable assembly has a male to female gender configuration with flexible LMR-240 series coax and operates to 5.8 GHz. The double shield of this N cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. L-com's RF cable assembly with N bulkhead interface enables system designers to have external connections on their product enclosures or to be used for other rack mount and panel mount applications. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N male to N female cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30174-FT6 L-com Low Loss N Male to N Female Bulkhead Cable Assembly using LMR-240 Coax, 6 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
LCCA30202-FT4
L-com's LCCA30202-FT4 is a low loss N male to N male cable assembly using LMR-400-DB coax, 4 FT with Times Microwave components and ships same-day. The LMR-400-DB coax of this N cable uses the PE (F) dielectric with a VoP of 85%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com N to N cable assembly has a male to male gender configuration with flexible LMR-400-DB series coax and operates to 6 GHz. The double shield of this N cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N male to N male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30202-FT4 L-com Low Loss N Male to N Male Cable Assembly using LMR-400-DB Coax, 4 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
PE6209
25 Watt RF Load Up To 8 GHz With 7/16 DIN Male Input Round Body Black Anodized Aluminum Heatsink
MPN खोज Exact, prefix और partial matching समर्थित है। ⌄
अस्वीकरण
निर्माता के नाम, ट्रेडमार्क, प्रतीक और पार्ट नंबर केवल पहचान और क्रॉस-रेफ़रेंस के लिए उपयोग किए जाते हैं। Cstone Technology संगत विकल्पों के लिए चीन स्थित निर्यात सोर्सिंग पार्टनर है और मूल ब्रांडों से संबद्ध नहीं है। ट्रेडमार्क उनके संबंधित स्वामियों की संपत्ति बने रहते हैं। अंतिम उपयुक्तता RFQ के दौरान ड्रॉइंग/स्पेसिफ़िकेशन समीक्षा से पुष्टि की जाती है।