Détails du produit
The SMAJ-402 is an SMA Straight Jack connector, designed for semi-rigid cables. This connector is suitable for various high-frequency applications.Fits 0.141Semi-Rigid,RG-402/U cables. It features a impedance 50Ω, operates up to 12.4GHz, and has a rated voltage of AC 330V, ensures a high insulation resistance (1000MΩ(Min.) at DC 500V), a low contact resistance (3 mΩ(Max.), and an excellent V.S.W.R 1.2(Max.) at 0.1~7 GHz. Withstanding temperatures from -40 to +85°C. The contact is made of Beryllium Copper/Gold Plating/Soldering, while the body is Stainless Steel/Gold Plating/Soldering. We recommend using a SMAJ positioner for mounting. We can customize our products for you. We offer total customization, including changes to a product's shape, length, material, surface treatment, and packaging. Available from 1 piece for in-stock items.Learn more about the SMA RF connector in our technical guide.
Référence (MPN)
câble RF sur mesure depuis plan pour sourcing de production
câble RF sur mesure depuis plan orienté production avec revue de compatibilité, guidance MOQ et support de sourcing cost-down.
Quoi préparer avant le RFQ Des données claires réduisent les hypothèses et accélèrent la réponse. ⌄
- • Partagez le MPN de référence, la pièce homologue ou la marque source si c’est important pour la vérification.
- • Ajoutez le BOM, la répartition des quantités et la demande annuelle si le projet dépasse le volume prototype.
- • Joignez le plan, la fiche technique ou les exigences critiques d’impédance, fréquence, montage et revêtement.
Image
Cliquez pour agrandir.
Specifications
| Interface | SMA Jack |
|---|---|
| Indice IP | {'text': "The SMAJ-402 is an SMA Straight Jack connector, designed for semi-rigid cables. This connector is suitable for various high-frequency applications.Fits 0.141Semi-Rigid,RG-402/U cables. It features a impedance 50Ω, operates up to 12.4GHz, and has a rated voltage of AC 330V, ensures a high insulation resistance (1000MΩ(Min.) at DC 500V), a low contact resistance (3 mΩ(Max.), and an excellent V.S.W.R 1.2(Max.) at 0.1~7 GHz. Withstanding temperatures from -40 to +85°C. The contact is made of Beryllium Copper/Gold Plating/Soldering, while the body is Stainless Steel/Gold Plating/Soldering. We recommend using a SMAJ positioner for mounting. We can customize our products for you. We offer total customization, including changes to a product's shape, length, material, surface treatment, and packaging. Available from 1 piece for in-stock items.Learn more about the SMA RF connector in our technical guide."} |
| Specifications | {'Cable type': '0.141Semi-Rigid, RG-402/U', 'Connector Gender': 'Jack', 'Impedance (Ohms)': '50Ω', 'Rated Voltage AC': 'AC 330V', 'Operating Frequency Range': '12.4GHz', 'Insulation Resistance': '1000MΩ(Min.) at DC 500V', 'Withstand Voltage': 'AC 1000V(1 minute)', 'Contact Resistance': '3 mΩ(Max.)', 'V.S.W.R': '1.2(Max.) at 0.1~7 GHz', 'Operating Temperature Range': '-40 to +85°C'} |
| Material/Plating/Attachment | {'Contact': 'Beryllium Copper/Gold Plating/Soldering', 'Body': 'Stainless Steel/Gold Plating/Soldering'} |
| Category | SMA Jack |
| Product Features | 50Ω; Jack; Products in stock; RoHS2 |
Description
Un MPN de référence est indiqué pour SMAJ-402 ; la confirmation finale dépend du plan, de la spécification ou du BOM. Si le montage manque ici, confirmez-le à partir du plan ou de l’exigence d’accouplement. Le matériau est indiqué comme {'Contact': 'Beryllium Copper/Gold Plating/Soldering', 'Body': 'Stainless Steel/Gold Plating/Soldering'}. Cela aide la revue, mais ne remplace pas la confirmation de la structure complète du projet. Utilisez cette page pour présélectionner avant le RFQ, pas comme validation finale.
Utilisez cette page pour présélectionner avant le RFQ. Le parcours d’approvisionnement et la production sur mesure MOQ 200+ sont confirmés après examen du plan/de la spécification/du BOM.
Connecteurs similaires
Ces modèles peuvent aussi vous intéresser :
SA6-01
1 dB Fixed Attenuator SMA Male (Plug) to SMA Female (Jack) Up to 6 GHz Rated to 2 Watts, Passivated Stainless Steel Body, 1.3 VSWR
901-10656
connecteurs RF / connecteurs coaxiaux Quick Connect coudé SMA adaptateur 50 Ω
2151-DKF-0024
RF assemblage de câbles SMA fiche vers N fiche 24 Inches
RFPCB-SMA-F-S-18G-26
RFPCB-SMA-F-S-18G-26 SMA jack bulkhead PCB connector available from L-com has a 50 Ohm impedance. This RF connector has an end launch connector mount interface and is designed for a wide variety of Printed-Circuit Board (PCB) applications in RF and microwave systems. The SMA connector is available in a 0.70-inch length, 0.41-inch width, and 0.41-inch height.The L-com SMA jack PCB connector has a PTFE dielectric type. This SMA PCB connector has a brass body with Gold over Nickel over Copper plating. Our RFPCB-SMA-F-S-18G-26 SMA connector uses beryllium copper contact and Gold over Nickel over Copper plating material. The SMA jack bulkhead connector uses solder as an attachment method. Additional dimensions and specifications for this SMA jack PCB RF connector are on our downloadable PDF datasheet above.This L-com SMA jack bulkhead connector will ship the same day as purchased. Our bulkhead SMA jack connector is part of over 40,000 RF, microwave, and millimeter wave components in stock for worldwide shipment. We also build SMA custom connector cable assemblies that will ship the same day as well.This SMA jack connector with 50 Ohm impedance has a weight of 0.04 lbs. The RFPCB-SMA-F-S-18G-26 threaded RF connector has a high-quality construction. We currently have a variety of antenna, audio/video, Ethernet, fiber optic, and USB connectors in our portfolio that are ready to ship today. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the high-quality RF product that meets your requirements.
SMA864LS-0000
SMA prise SQ 12.7 mm 4 hole flange avec round contact (Φ1.27L=2.9), PTFE L=15 18 GHz VSWR1.2
R124464000
SMA / ADJUST. 2 HOLE FLANGE prise embase avec CYLINDRICAL contact
Recherche MPN Prend en charge la correspondance exacte, par préfixe et partielle. ⌄
Avertissement
Cstone est une usine professionnelle, et non une société de négoce, spécialisée dans les connecteurs RF et coaxiaux, les adaptateurs et les assemblages de câbles, notamment N-type, BNC, SMA, SMP, SSMB et MMCX. Nous fabriquons les connecteurs selon des plans 2D ou des échantillons ; l’adéquation, le MOQ, le délai et les détails de production sont confirmés par RFQ. Cstone Technology n’est pas affiliée aux marques d’origine. Les noms de fabricants, marques déposées, symboles et références de pièces sont utilisés uniquement à des fins d’identification et de référence croisée. Les marques restent la propriété de leurs détenteurs respectifs. L’adéquation finale est confirmée par examen du plan/des spécifications lors du RFQ.