Détails du produit
The 2.40mm series from the RF connector range form part of the wide ranging Radio Frequency interconnect mechanisms, with the 2.40mm connectors being more robust than the traditional SMA.
Référence (MPN)
Impédance
50Ohm
câble RF sur mesure depuis plan pour sourcing de production
câble RF sur mesure depuis plan orienté production avec revue de compatibilité, guidance MOQ et support de sourcing cost-down.
Quoi préparer avant le RFQ Des données claires réduisent les hypothèses et accélèrent la réponse. ⌄
- • Partagez le MPN de référence, la pièce homologue ou la marque source si c’est important pour la vérification.
- • Ajoutez le BOM, la répartition des quantités et la demande annuelle si le projet dépasse le volume prototype.
- • Joignez le plan, la fiche technique ou les exigences critiques d’impédance, fréquence, montage et revêtement.
Image
Cliquez pour agrandir.
Specifications
| Interface | RF Connectors |
|---|---|
| Interface | 2.40mm Series |
| Impédance | 50Ohm |
| Body Material | Stainless Steel Passivation |
| Terminaison | Beryllium Copper |
| Indice IP | 2.4mm Plug End Launch RF Connector |
| Maximum Voltage | 150V |
| Temperature range | -55°C to +125°C |
| Frecuency range | 0GHz - 50GHz |
| VSWR | <1.60 |
| Dielectric withstanding Voltage | >500V |
| Category | RF Connectors |
Show 8 more specs
| Product Features | 2.40mm Series End Launch Connector; range_code: RF240E Range |
|---|---|
| Part Number | RF240EP |
| Lifecycle | New From This Manufacturer |
| Delivery | DHL、UPS、FedEx、Registered Mail |
| Payment | T/T Paypal Visa MoneyGram Western Union |
| More Information | RF240EP More Information |
| ECAD | Request Free CAD Models |
| Model Number | RF240EP |
Description
Données de référence actuelles pour RF240EP : 50Ohm. L’impédance est indiquée comme 50Ohm. Si ce paramètre est critique, confirmez-le à nouveau dans le RFQ. Si le montage manque ici, confirmez-le à partir du plan ou de l’exigence d’accouplement. Le matériau est indiqué comme Stainless Steel Passivation. Cela aide la revue, mais ne remplace pas la confirmation de la structure complète du projet. Utilisez cette page pour présélectionner avant le RFQ, pas comme validation finale.
Utilisez cette page pour présélectionner avant le RFQ. Le parcours d’approvisionnement et la production sur mesure MOQ 200+ sont confirmés après examen du plan/de la spécification/du BOM.
Connecteurs similaires
Ces modèles peuvent aussi vous intéresser :
135103-03-18.00
RF assemblage de câbles SMA coudé fiche vers droit fiche RG-316 DB 18in
R191300800~
SMA femelle FLANGE TEST PROBE pour SMA femelle connecteurs MEASUREMENT
1-core (Single) OM1 SC-SC
This product is an optical fiber cable pre-terminated with optical connectors. The standard cable color varies depending on the fiber mode. This is a 1-core (Single) cable, multimode (OM1), with SC-SC connectors.Example model: TFC-1C-OM1-SC-SC-1mYou can select the fiber count (1-core/2-core/4-core), mode (single-mode (SM) / multimode (OM1–OM5), and connector type (SC/LC/ST/FC/MU/SMA905), and specify the overall length. Please refer to the specifications.Delivery is typically 2 to 5 weeks after order placement. Please contact us for details.
LCCA30470-FT5
L-com BNC female to SMA female cable assembly using LC141TBJ coax, 5 FT is available for same day shipping from our facility. This high quality BNC cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30470-FT5 BNC cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF coaxial cable assemblies are built with BNC connection on one end and SMA connection on the other. This BNC to SMA cable from L-com has a female to female gender combination. Our BNC female to SMA female coaxial assembly part number LCCA30470-FT5 can also be known as BNC jack to SMA jack cable assembly when using alternate gender names. BNC jack to SMA jack cable assembly LCCA30470-FT5 is manufactured with a formable coax.Maximum frequency for these BNC to SMA F/F cables is 2 GHz. Technical performance specifications on these 2 GHz BNC female to SMA female cables are located on the LCCA30470-FT5 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a SMA female to BNC female cable assembly because it can be used in the opposite direction.BNC female to SMA female cable assembly using LC141TBJ coax, 5 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our BNC to SMA cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our BNC female to SMA female cable assembly using LC141TBJ coax, 5 FT.
LCCA30614-FT5
L-com N male right angle to SMA female cable assembly using LC085TBJ coax, 5 FT is available for same day shipping from our facility. This high quality N cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30614-FT5 N cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF coaxial cable assemblies are built with right angle N connection on one end and SMA connection on the other. This right angle N to SMA cable from L-com has a male to female gender combination. Our N male to SMA female coaxial assembly part number LCCA30614-FT5 can also be known as right angle N plug to SMA jack cable assembly when using alternate gender names. N plug to SMA jack cable assembly LCCA30614-FT5 is manufactured with a formable coax. These formable N to SMA cable assemblies use LC085TBJ coax and are single shielded. L-com single shielded N male right angle to SMA female cable assembly using LC085TBJ coax, 5 FT is built from quality components by skilled assemblers with many years of experience.Maximum frequency for these N to SMA M/F cables is 10 GHz. Technical performance specifications on these 10 GHz N right angle male to SMA female cables are located on the LCCA30614-FT5 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a SMA female to right angle N male cable assembly because it can be used in the opposite direction.N male right angle to SMA female cable assembly using LC085TBJ coax, 5 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our right angle N to SMA cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our N male right angle to SMA female cable assembly using LC085TBJ coax, 5 FT.
PE3C2185-HS
N Male to SMA Male Low Loss Cable Using LMR-240-DB Coax with HeatShrink
Recherche MPN Prend en charge la correspondance exacte, par préfixe et partielle. ⌄
Avertissement
Les noms de fabricants, marques déposées, symboles et références de pièces sont utilisés uniquement à des fins d’identification et de référence croisée. Cstone Technology est un partenaire d’approvisionnement export basé en Chine pour des alternatives compatibles et n’est affilié à aucune marque d’origine. Les marques restent la propriété de leurs détenteurs respectifs. L’adéquation finale est confirmée par examen du plan/des spécifications lors du RFQ.