Détails du produit
N Male Right Angle to TNC Male Right Angle Low Loss Cable Using LMR-240 Coax
Référence (MPN)
Impédance
50 Ohm
Interface
N
câble RF sur mesure depuis plan pour sourcing de production
câble RF sur mesure depuis plan orienté production avec revue de compatibilité, guidance MOQ et support de sourcing cost-down.
Quoi préparer avant le RFQ Des données claires réduisent les hypothèses et accélèrent la réponse. ⌄
- • Partagez le MPN de référence, la pièce homologue ou la marque source si c’est important pour la vérification.
- • Ajoutez le BOM, la répartition des quantités et la demande annuelle si le projet dépasse le volume prototype.
- • Joignez le plan, la fiche technique ou les exigences critiques d’impédance, fréquence, montage et revêtement.
Image
Cliquez pour agrandir.
Specifications
| Interface | Cable Assemblies |
|---|---|
| Interface | LMR-240 |
| Interface | N |
| Interface | TNC |
| Impédance | 50 Ohm |
| Impédance | 50 Ohm |
| Impédance | 50 Ohm |
| Genre | Male |
| Genre | Male |
| Orientation | Right Angle |
| Orientation | Right Angle |
| Connector 1 Body Material | Brass |
Show 5 more specs
| Connector 1 Body Plating | Tri-Metal |
|---|---|
| Connector 1 Polarity | Standard |
| Connector 2 Polarity | Standard |
| Type de câble | LMR-240 |
| Category | Cable Assemblies |
Description
Données de référence actuelles pour PE3W00815 : N · 50 Ohm · Right Angle. Le catalogue indique la configuration suivante : Right Angle. L’impédance est indiquée comme 50 Ohm. Si ce paramètre est critique, confirmez-le à nouveau dans le RFQ. Si le montage manque ici, confirmez-le à partir du plan ou de l’exigence d’accouplement. Le matériau est indiqué comme Brass. Cela aide la revue, mais ne remplace pas la confirmation de la structure complète du projet. Utilisez cette page pour présélectionner avant le RFQ, pas comme validation finale.
Utilisez cette page pour présélectionner avant le RFQ. Le parcours d’approvisionnement et la production sur mesure MOQ 200+ sont confirmés après examen du plan/de la spécification/du BOM.
Connecteurs similaires
Ces modèles peuvent aussi vous intéresser :
LCCA30691-FT4
L-com N female bulkhead to TNC male cable assembly using RG58 coax, 4 FT is available for same day shipping from our facility. This high quality N cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30691-FT4 N cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF coaxial cable assemblies are built with N bulkhead connection on one end and TNC connection on the other. This N to TNC cable from L-com has a female to male gender combination. Our N female to TNC male coaxial assembly part number LCCA30691-FT4 can also be known as N jack to TNC plug cable assembly when using alternate gender names. N jack to TNC plug cable assembly LCCA30691-FT4 is manufactured with a flexible coax. These flexible N to TNC cable assemblies use RG58 coax and are single shielded. L-com single shielded N female bulkhead to TNC male cable assembly using RG58 coax, 4 FT is built from quality components by skilled assemblers with many years of experience.Maximum frequency for these N to TNC F/M cables is 1 GHz. Technical performance specifications on these 1 GHz N femalebulkhead to TNC male cables are located on the LCCA30691-FT4 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a TNC male to N female bulkhead cable assembly because it can be used in the opposite direction.N female bulkhead to TNC male cable assembly using RG58 coax, 4 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our N to TNC cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our N female bulkhead to TNC male cable assembly using RG58 coax, 4 FT.
LCCA30652-FT1
L-com N female to TNC female cable assembly using LC085TBJ coax, 1 FT is available for same day shipping from our facility. This high quality N cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30652-FT1 N cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF coaxial cable assemblies are built with N connection on one end and TNC connection on the other. This N to TNC cable from L-com has a female to female gender combination. Our N female to TNC female coaxial assembly part number LCCA30652-FT1 can also be known as N jack to TNC jack cable assembly when using alternate gender names. N jack to TNC jack cable assembly LCCA30652-FT1 is manufactured with a formable coax. These formable N to TNC cable assemblies use LC085TBJ coax and are single shielded. L-com single shielded N female to TNC female cable assembly using LC085TBJ coax, 1 FT is built from quality components by skilled assemblers with many years of experience.Maximum frequency for these N to TNC F/F cables is 6 GHz. Technical performance specifications on these 6 GHz N female to TNC female cables are located on the LCCA30652-FT1 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a TNC female to N female cable assembly because it can be used in the opposite direction.N female to TNC female cable assembly using LC085TBJ coax, 1 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our N to TNC cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our N female to TNC female cable assembly using LC085TBJ coax, 1 FT.
ALS-N8T8-18-1.35
N prise vers TNC prise coudé 18 GHz VSWR1.35
LCCA30271-FT10
L-com's LCCA30271-FT10 is a low loss N female bulkhead to TNC male right angle cable assembly using LMR-240 coax, 10 FT with Times Microwave components and ships same-day. The LMR-240 coax of this N cable uses the PE (F) dielectric with a VoP of 84%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com N to TNC cable assembly has a female to male gender configuration with flexible LMR-240 series coax and operates to 5.8 GHz. The double shield of this N cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. L-com's RF cable assembly with N bulkhead interface enables system designers to have external connections on their product enclosures or to be used for other rack mount and panel mount applications. This right angle TNC cable interface on the LMR-240 coax allows for easier connections in tight spaces. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N female to N male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30271-FT10 L-com Low Loss N Female Bulkhead to TNC Male Right Angle Cable Assembly using LMR-240 Coax, 10 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
LCCA30083-FT5
L-com TNC male to TNC male cable assembly using LC141TB coax, 5 FT is available for same day shipping from our facility. This high quality TNC cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30083-FT5 TNC cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF coaxial cable assemblies are built with TNC connection on one end and TNC connection on the other. This TNC to TNC cable from L-com has a male to male gender combination. Our TNC male to TNC male coaxial assembly part number LCCA30083-FT5 can also be known as TNC plug to TNC plug cable assembly when using alternate gender names. TNC plug to TNC plug cable assembly LCCA30083-FT5 is manufactured with a formable coax.Maximum frequency for these TNC to TNC M/M cables is 6 GHz. Technical performance specifications on these 6 GHz TNC male to TNC male cables are located on the LCCA30083-FT5 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day.TNC male to TNC male cable assembly using LC141TB coax, 5 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our TNC to TNC cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our TNC male to TNC male cable assembly using LC141TB coax, 5 FT.
T30T39-L240-
TNC fiche vers TNC fiche coudé using JBY240
Recherche MPN Prend en charge la correspondance exacte, par préfixe et partielle. ⌄
Avertissement
Cstone est une usine professionnelle, et non une société de négoce, spécialisée dans les connecteurs RF et coaxiaux, les adaptateurs et les assemblages de câbles, notamment N-type, BNC, SMA, SMP, SSMB et MMCX. Nous fabriquons les connecteurs selon des plans 2D ou des échantillons ; l’adéquation, le MOQ, le délai et les détails de production sont confirmés par RFQ. Cstone Technology n’est pas affiliée aux marques d’origine. Les noms de fabricants, marques déposées, symboles et références de pièces sont utilisés uniquement à des fins d’identification et de référence croisée. Les marques restent la propriété de leurs détenteurs respectifs. L’adéquation finale est confirmée par examen du plan/des spécifications lors du RFQ.