Détails du produit
78 Ohm TRB 3-Slot Solder/Clamp Plug to 3-Lug Solder/Clamp Non-Insulated Bulkhead Jack for PE-30-02001 Twinax (.242 O.D.) Cable
Référence (MPN)
Impédance
78 Ohm
Interface
TRB
câble RF sur mesure depuis plan pour sourcing de production
câble RF sur mesure depuis plan orienté production avec revue de compatibilité, guidance MOQ et support de sourcing cost-down.
Quoi préparer avant le RFQ Des données claires réduisent les hypothèses et accélèrent la réponse. ⌄
- • Partagez le MPN de référence, la pièce homologue ou la marque source si c’est important pour la vérification.
- • Ajoutez le BOM, la répartition des quantités et la demande annuelle si le projet dépasse le volume prototype.
- • Joignez le plan, la fiche technique ou les exigences critiques d’impédance, fréquence, montage et revêtement.
Image
Cliquez pour agrandir.
Specifications
| Interface | Cable Assemblies |
|---|---|
| Interface | 30-02001 |
| Interface | TRB |
| Interface | TRB |
| Impédance | 78 Ohm |
| Impédance | 78 Ohm |
| Impédance | 78 Ohm |
| Genre | Plug |
| Genre | Jack |
| Orientation | Straight |
| Orientation | Straight |
| Connector 1 Body Material | Brass |
Show 6 more specs
| Connector 1 Body Plating | Nickel |
|---|---|
| Connector 1 Polarity | Standard |
| Connector 2 Polarity | Standard |
| Montage | Bulkhead |
| Type de câble | PE-30-02001 |
| Category | Cable Assemblies |
Description
Données de référence actuelles pour PE3MP2268 : TRB · 78 Ohm · Bulkhead. Le catalogue indique la configuration suivante : Straight. L’impédance est indiquée comme 78 Ohm. Si ce paramètre est critique, confirmez-le à nouveau dans le RFQ. Le montage est indiqué comme Bulkhead. Si les contraintes de panneau, de traversée ou de bride comptent, envoyez les dimensions avec le RFQ. Le matériau est indiqué comme Brass. Cela aide la revue, mais ne remplace pas la confirmation de la structure complète du projet. Utilisez cette page pour présélectionner avant le RFQ, pas comme validation finale.
Utilisez cette page pour présélectionner avant le RFQ. Le parcours d’approvisionnement et la production sur mesure MOQ 200+ sont confirmés après examen du plan/de la spécification/du BOM.
Connecteurs similaires
Ces modèles peuvent aussi vous intéresser :
LC3MSA00587-12
L-com’s LC3MSA00587-12 is a Twinax LSZH TRB jack bulkhead to TRB jack bulkhead 1553, 12-inch length using 78 ohm TWCH-78-2 coax cable. These cable assemblies have popular TRB plug and jack connectors with 3-lug bayonet coupling designs as well as TRB plugs with threaded designs. These MIL-STD-1553 Twinaxial cable assemblies with TRB and TRS connector interfaces are the most popular cable assemblies used in wide interconnect applications to be used with bus couplers, avionics control boxes, and bus relays.The LC3MSA00587-12 Twinax LSZH TRB jack bulkhead to TRB jack bulkhead 1553, 12-inch length using 78 ohm TWCH-78-2 coax MIL-STD-1553 cable assemblies are bend/strain relief. These cable assemblies have Twinax connectivity and are suitable for aerospace avionics system designers and builders, military, aerospace, and aircraft avionics, and test labs. These cable assemblies can withstand severe shocks and vibrations, making them critical avionics components. The 78 ohms Twinax LSZH TRB jack bulkhead to TRB jack bulkhead 1553, 12-inch length using 78 ohm TWCH-78-2 coax cable assemblies have a robust design and are easy to use. L-com has one of the largest in-stock selections of LSZH TRB jack bulkhead to TRB jack bulkhead 1553, 12-inch length using 78 ohm TWCH-78-2 coax cable assemblies with same-day shipment. Make your online purchase right now to take advantage of our same-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal LSZH TRB jack bulkhead to TRB jack bulkhead 1553, 12-inch length using 78 ohm TWCH-78-2 coax MIL-STD-1553 cable assemblies for your requirements.
CA-TRBP-PR025
These high-temperature cable assemblies feature M17/176-00002 twinax cable and high quality Trompeter TRB straight plug to right angle connectors. Available in lengths from 1' to 50'. These cables are typically used for MIL-STD-1553B bus applications.
LC3MP2540-12
L-com’s LC3MP2540-12 is a Twinax bend relief 3-lug TRB jack to jack for 78 ohm 30-02001-LC, 12-inch cable. These cable assemblies have popular TRB plug and jack connectors with 3-lug bayonet coupling designs as well as TRB plugs with threaded designs. These MIL-STD-1553 Twinaxial cable assemblies with TRB and TRS connector interfaces are the most popular cable assemblies used in wide interconnect applications to be used with bus couplers, avionics control boxes, and bus relays.The LC3MP2540-12 Twinax bend relief 3-lug TRB jack to jack for 78 ohm 30-02001-LC, 12-inch MIL-STD-1553 cable assemblies are bend/strain relief. These cable assemblies have Twinax connectivity and are suitable for aerospace avionics system designers and builders, military, aerospace, and aircraft avionics, and test labs. These cable assemblies can withstand severe shocks and vibrations, making them critical avionics components. The 78 ohms Twinax bend relief 3-lug TRB jack to jack for 78 ohm 30-02001-LC, 12-inch cable assemblies have a robust design and are easy to use. L-com has one of the largest in-stock selections of bend relief 3-lug TRB jack to jack for 78 ohm 30-02001-LC, 12-inch cable assemblies with same-day shipment. Make your online purchase right now to take advantage of our same-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal bend relief 3-lug TRB jack to jack for 78 ohm 30-02001-LC, 12-inch MIL-STD-1553 cable assemblies for your requirements.
C28S-06.00-SPS8-SPS8
RF assemblage de câbles Circular RF blindé Twisted Pair Twinax assemblage de câbles 28 AWG
CJT-T-P-HH-ST-TH1
connecteurs RF / connecteurs coaxiaux Circular RF Twinax prise, Bulkhead Through-hole
LC3MSA00596-60
L-com’s LC3MSA00596-60 is a Twinax LSZH bend relief 3-lug TRB non-insulated bulkhead jack with blunt cut 1553, 60-inch using 78 ohm TWCH-78-2 cable. These cable assemblies have popular TRB plug and jack connectors with 3-lug bayonet coupling designs as well as TRB plugs with threaded designs. These MIL-STD-1553 Twinaxial cable assemblies with TRB and TRS connector interfaces are the most popular cable assemblies used in wide interconnect applications to be used with bus couplers, avionics control boxes, and bus relays.The LC3MSA00596-60 Twinax LSZH bend relief 3-lug TRB non-insulated bulkhead jack with blunt cut 1553, 60-inch using 78 ohm TWCH-78-2 MIL-STD-1553 cable assemblies are bend/strain relief. These cable assemblies have Twinax connectivity and are suitable for aerospace avionics system designers and builders, military, aerospace, and aircraft avionics, and test labs. These cable assemblies can withstand severe shocks and vibrations, making them critical avionics components. The 78 ohms Twinax LSZH bend relief 3-lug TRB non-insulated bulkhead jack with blunt cut 1553, 60-inch using 78 ohm TWCH-78-2 cable assemblies have a robust design and are easy to use. L-com has one of the largest in-stock selections of LSZH bend relief 3-lug TRB non-insulated bulkhead jack with blunt cut 1553, 60-inch using 78 ohm TWCH-78-2 cable assemblies with same-day shipment. Make your online purchase right now to take advantage of our same-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal LSZH bend relief 3-lug TRB non-insulated bulkhead jack with blunt cut 1553, 60-inch using 78 ohm TWCH-78-2 MIL-STD-1553 cable assemblies for your requirements.
Recherche MPN Prend en charge la correspondance exacte, par préfixe et partielle. ⌄
Avertissement
Les noms de fabricants, marques déposées, symboles et références de pièces sont utilisés uniquement à des fins d’identification et de référence croisée. Cstone Technology est un partenaire d’approvisionnement export basé en Chine pour des alternatives compatibles et n’est affilié à aucune marque d’origine. Les marques restent la propriété de leurs détenteurs respectifs. L’adéquation finale est confirmée par examen du plan/des spécifications lors du RFQ.