CSTONE
Liste RFQ

Détails du produit

Fire Rated 4.3-10 Female to 7/16 DIN Male Low PIM Cable Using SPF-250 Coax Using Times Microwave Parts

Alternative compatible sourcée en Chine — nous confirmons l’adéquation à partir de votre plan/spécification.

Référence (MPN)

PE3C6350

Impédance

50 Ohm

Interface

4.3-10

câble RF sur mesure depuis plan pour sourcing de production

câble RF sur mesure depuis plan orienté production avec revue de compatibilité, guidance MOQ et support de sourcing cost-down.

Câble RF sur plan →
WhatsApp — Réponse rapide
Délai : 3–6 sem. | MOQ : 200+ pcs
Quoi préparer avant le RFQ Des données claires réduisent les hypothèses et accélèrent la réponse.
  • Partagez le MPN de référence, la pièce homologue ou la marque source si c’est important pour la vérification.
  • Ajoutez le BOM, la répartition des quantités et la demande annuelle si le projet dépasse le volume prototype.
  • Joignez le plan, la fiche technique ou les exigences critiques d’impédance, fréquence, montage et revêtement.

Image

Cliquez pour agrandir.

Image du produit

PE3C6350 product photo

PE3C6350 product photo

Specifications

Specifications for PE3C6350
InterfaceCable Assemblies
InterfaceSPF-250
Interface4.3-10
Interface7/16 DIN
Impédance50 Ohm
Impédance50 Ohm
Impédance50 Ohm
GenreFemale
GenreMale
OrientationStraight
OrientationStraight
Connector Polarity 1Standard
Show 5 more specs
MontageNone
Connector Polarity 2Standard
MontageNone
Type de câbleSPF-250
CategoryCable Assemblies

Description

Données de référence actuelles pour PE3C6350 : 4.3-10 · 50 Ohm · Straight. Le catalogue indique la configuration suivante : Straight. L’impédance est indiquée comme 50 Ohm. Si ce paramètre est critique, confirmez-le à nouveau dans le RFQ. Si le montage manque ici, confirmez-le à partir du plan ou de l’exigence d’accouplement. Utilisez cette page pour présélectionner avant le RFQ, pas comme validation finale.

Utilisez cette page pour présélectionner avant le RFQ. Le parcours d’approvisionnement et la production sur mesure MOQ 200+ sont confirmés après examen du plan/de la spécification/du BOM.

Connecteurs similaires

Ces modèles peuvent aussi vous intéresser :

VN01 016 0004 1

Circular DIN connecteurs Cmp M 1.6 mm 16-20awg Pack of 100

Voir les détails →

LCCN3230

The L-com LCCN3230 is NEX10 Male low PIM coaxial connector which has excellent low passive intermodulation performance providing user strong signals with more bandwidth. This radio frequency connector operates at 6 GHz maximum frequency. This RF connector is Threaded to fasten easily with Straight body style making it the right choice for RF interconnect applications. L-com’s NEX10 low PIM coaxial connector has a Brass body insulated with excellent dielectric PTFE material making it sturdy and durable. This connector comes with Brass Contact material and coupling nut with Silver plating. The coaxial connector has LC141TB interface type that ensures easy installation with hand formable coaxial cables. This RF connector has an operating temperature range from -40 deg C to 155 deg C. The LCCN3230 coaxial connector with Solder/Solder attachment method offers fully customizable configurations and lengths fulfilling customer requirements. The use of standardized 50 Ohms impedance with 0.47 Inch hex size coupling makes RF low PIM coaxial connector design much more practical and efficient. L-com’s low PIM connector is designed to conform RoHS and Reach compliances making it the most trusted and reliable product. The LCCN3230 coaxial connector from L-com is in stock and available for same-day shipping. This low PIM coaxial connector with 50 Ohms impedance is ideal for typical applications such as cable assemblies with PIM requirements, wireless deployments, and to connect system components including antennas, amplifiers, and switches. For further information on similar products, our expert technical support and trained sales team can get you to the perfect NEX10 Male RF low PIM coaxial connector as per your requirement.

Voir les détails →

L777SDE09PACCH4R

connecteurs D-Sub D-Sub standard, Stamped Signal 3A, coudé PCB traversant, FP=1.2 mm (.0.047in), 9 broche, 0.38 m (15 in) or, Bright étain Shell+Grounding Dimples, 4-40 Rear Insert, Ground Tab avec Boardlock

Voir les détails →

1210640661

Circular DIN connecteurs DIN43650A TRAN PG11 12V LED

Voir les détails →

LCCA30221-FT4

L-com's LCCA30221-FT4 is a low loss N male to N female cable assembly using LMR-600-DB coax, 4 FT with Times Microwave components and ships same-day. The LMR-600-DB coax of this N cable uses the PE (F) dielectric with a VoP of 87%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com N to N cable assembly has a male to female gender configuration with flexible LMR-600-DB series coax and operates to 5.8 GHz. The double shield of this N cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N male to N female cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30221-FT4 L-com Low Loss N Male to N Female Cable Assembly using LMR-600-DB Coax, 4 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.

Voir les détails →

1210640996

Circular DIN connecteurs connecteur 532 PG11 TRASP.H12

Voir les détails →
Recherche MPN Prend en charge la correspondance exacte, par préfixe et partielle.

Prend en charge la correspondance exacte, par préfixe et partielle.

Avertissement

Les noms de fabricants, marques déposées, symboles et références de pièces sont utilisés uniquement à des fins d’identification et de référence croisée. Cstone Technology est un partenaire d’approvisionnement export basé en Chine pour des alternatives compatibles et n’est affilié à aucune marque d’origine. Les marques restent la propriété de leurs détenteurs respectifs. L’adéquation finale est confirmée par examen du plan/des spécifications lors du RFQ.