Détails du produit
Plenum 7/16 DIN Male Right Angle to N Male Right Angle Low PIM Cable Using SPP-250-LLPL Coax Using Times Microwave Parts
Référence (MPN)
Impédance
50 Ohm
Interface
7/16 DIN
câble RF sur mesure depuis plan pour sourcing de production
câble RF sur mesure depuis plan orienté production avec revue de compatibilité, guidance MOQ et support de sourcing cost-down.
Quoi préparer avant le RFQ Des données claires réduisent les hypothèses et accélèrent la réponse. ⌄
- • Partagez le MPN de référence, la pièce homologue ou la marque source si c’est important pour la vérification.
- • Ajoutez le BOM, la répartition des quantités et la demande annuelle si le projet dépasse le volume prototype.
- • Joignez le plan, la fiche technique ou les exigences critiques d’impédance, fréquence, montage et revêtement.
Image
Cliquez pour agrandir.
Specifications
| Interface | Cable Assemblies |
|---|---|
| Interface | SPP-250-LLPL |
| Interface | 7/16 DIN |
| Interface | N |
| Impédance | 50 Ohm |
| Impédance | 50 Ohm |
| Impédance | 50 Ohm |
| Genre | Male |
| Genre | Male |
| Orientation | Right Angle |
| Orientation | Right Angle |
| Connector Polarity 1 | Standard |
Show 5 more specs
| Montage | None |
|---|---|
| Connector Polarity 2 | Standard |
| Montage | None |
| Type de câble | SPP-250-LLPL |
| Category | Cable Assemblies |
Description
Données de référence actuelles pour PE3C6199 : 7/16 DIN · 50 Ohm · Right Angle. Le catalogue indique la configuration suivante : Right Angle. L’impédance est indiquée comme 50 Ohm. Si ce paramètre est critique, confirmez-le à nouveau dans le RFQ. Si le montage manque ici, confirmez-le à partir du plan ou de l’exigence d’accouplement. Utilisez cette page pour présélectionner avant le RFQ, pas comme validation finale.
Utilisez cette page pour présélectionner avant le RFQ. Le parcours d’approvisionnement et la production sur mesure MOQ 200+ sont confirmés après examen du plan/de la spécification/du BOM.
Connecteurs similaires
Ces modèles peuvent aussi vous intéresser :
4.3/10P-7/16P
The 4.3/10P-7/16P is an In/Between Series Adaptors . This connector is suitable for various high-frequency applications. It features a impedance 50Ω, operates up to 6GHz, and has a rated voltage of AC 1.8kV, ensures a high insulation resistance (5000MΩ(Min.) at DC 500V), a low contact resistance (1 mΩ(Max.) (4.3/10),0.4 mΩ(Max.) (7/16), and an excellent V.S.W.R 1.2(Max.) at DC~6GHz. Withstanding temperatures from -40 to +85°C. The contact is made of Brass/Silver Plating, while the body is Brass/Ternary Plating. We can customize our products for you. We offer total customization, including changes to a product's shape, length, material, surface treatment, and packaging. Available from 1 piece for in-stock items.
LCCA30340-FT2
L-com's LCCA30340-FT2 is a low loss 4.3-10 male to N female cable assembly using LMR-600 coax, 2 FT with Times Microwave components and ships same-day. The LMR-600 coax of this 4.3-10 cable uses the PE (F) dielectric with a VoP of 87%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com 4.3-10 to N cable assembly has a male to female gender configuration with flexible LMR-600 series coax and operates to 5.8 GHz. The double shield of this 4.3-10 cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this 4.3-10 male to 4.3-10 female cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30340-FT2 L-com Low Loss 4.3-10 Male to N Female Cable Assembly using LMR-600 Coax, 2 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
MD-90
DIN connecteurs Mini Din connecteurs
LMR-LW195-LC-FT
LMR-LW195-LC-FT coax cable from L-com is only one of a large number of radio frequency coaxial cable types specifically stocked to be ready for quick shipment. L-com LMR-LW195-LC-FT coax cable is manufactured in a flexible design and has a 50 Ohm impedance. This low loss flexible 50 Ohm coax cable LMR-LW195-LC-FT is constructed with a 0.195 inch diameter and Black PE jacket. LMR-LW195-LC-FT flexible 50 Ohm coax cable with PVC jacket is rated for a 5.8 GHz maximum operating frequency. This 50 Ohm 0.195 inch diameter and low loss flexible coax cable is built with a double shield count and RF shielding of 90 dB. L-com LMR-LW195-LC-FT coax is constructed with Foam PE dielectric and a maximum operating temperature of +85 degrees C. Times Microwave LMR-LW195-LC-FT coax cable specs for this wire properties can be found on its RF coax cable LMR-LW195-LC-FT datasheet. LMR-LW195-LC-FT cable is part of more than one million RF, microwave parts in stock at L-com. This Times Microwave low loss LMR-LW195-LC-FT coax cable is ready to buy and can be shipped worldwide. L-com also maintains a wide selection of other radio frequency coaxial cable types that ship same-day from our warehouse as with the rest of our other RF/microwave components. * LMR™ is a trademark of Times Microwave Systems.
62PC8FS
DIN connecteurs 8P coudé SHLD connecteur
C09111H0040014U
Circular DIN connecteurs 4PIN 6-8 mm mâle à sertir TERMINATION
Recherche MPN Prend en charge la correspondance exacte, par préfixe et partielle. ⌄
Avertissement
Les noms de fabricants, marques déposées, symboles et références de pièces sont utilisés uniquement à des fins d’identification et de référence croisée. Cstone Technology est un partenaire d’approvisionnement export basé en Chine pour des alternatives compatibles et n’est affilié à aucune marque d’origine. Les marques restent la propriété de leurs détenteurs respectifs. L’adéquation finale est confirmée par examen du plan/des spécifications lors du RFQ.