Détails du produit
TRB 3-Slot Straight Plug 78 Ohm
Référence (MPN)
Impédance
78 Ohm
Interface
TRB 3-Slot
câble RF sur mesure depuis plan pour sourcing de production
câble RF sur mesure depuis plan orienté production avec revue de compatibilité, guidance MOQ et support de sourcing cost-down.
Quoi préparer avant le RFQ Des données claires réduisent les hypothèses et accélèrent la réponse. ⌄
- • Partagez le MPN de référence, la pièce homologue ou la marque source si c’est important pour la vérification.
- • Ajoutez le BOM, la répartition des quantités et la demande annuelle si le projet dépasse le volume prototype.
- • Joignez le plan, la fiche technique ou les exigences critiques d’impédance, fréquence, montage et revêtement.
Image
Cliquez pour agrandir.
Specifications
| Interface | Coaxial Cable Assemblies |
|---|---|
| Interface | TWCH-78-2-LC |
| Interface | TRB 3-Slot |
| Interface | TRB 3-Lug |
| Impédance | 78 Ohm |
| Impédance | 78 Ohm |
| Impédance | 78 Ohm |
| Genre | Plug |
| Genre | Jack |
| Orientation | Straight |
| Orientation | Straight |
| Connector 1 Body Material | Brass |
Show 6 more specs
| Connector 1 Body Plating | Nickel |
|---|---|
| Connector 1 Polarity | Standard |
| Connector 2 Polarity | Standard |
| Type de câble | TWCH-78-2-LC |
| Length, Max | 36 inches |
| Category | Coaxial Cable Assemblies |
Description
Données de référence actuelles pour LC3MSA00577-36 : TRB 3-Slot · 78 Ohm · Straight. Le catalogue indique la configuration suivante : Straight. L’impédance est indiquée comme 78 Ohm. Si ce paramètre est critique, confirmez-le à nouveau dans le RFQ. Si le montage manque ici, confirmez-le à partir du plan ou de l’exigence d’accouplement. Le matériau est indiqué comme Brass. Cela aide la revue, mais ne remplace pas la confirmation de la structure complète du projet. Utilisez cette page pour présélectionner avant le RFQ, pas comme validation finale.
Utilisez cette page pour présélectionner avant le RFQ. Le parcours d’approvisionnement et la production sur mesure MOQ 200+ sont confirmés après examen du plan/de la spécification/du BOM.
Connecteurs similaires
Ces modèles peuvent aussi vous intéresser :
2.4-A-PP
The 2.4-A-PP is an 2.4mm adaptor connector. This connector is suitable for various high-frequency applications. It features a impedance 50Ω, operates up to 50GHz, and has a rated voltage of AC 160V, ensures a high insulation resistance (1000MΩ(Min.) at DC 500V), a low contact resistance (Between inner conductors: 4 mΩ(Max.),between outer conductors: 2.5 mΩ(Max.), and an excellent V.S.W.R 1.25(Max.) at DC~50GHz. The contact is made of Beryllium Copper/Gold Plating, while the body is Stainless/Passivate Treatment. We can customize our products for you. We offer total customization, including changes to a product's shape, length, material, surface treatment, and packaging. Available from 1 piece for in-stock items.
L717SDE09PABCH4F
connecteurs D-Sub D-Sub standard, Stamped Signal 3A, coudé PCB traversant, FP=14.84 mm (.584in), Row Pitch 2.84 mm, 09 broche, Flash or, Bright étain Shell+Grounding Dimples, 4-40 Front Screwlock, Ground Tab avec Boardlock
LC3MP2310-24
The L-com LC3MP2310-24 MIL-STD-1553 flexible RF cable assembly is perfect for applications that need tight bends and flexible cable. This TRB 3-slot to TRB 3-lug cable assembly is plug to jack and made of 78 ohm flexible 30-02003-LC twinax. Our 78 Ohm cable assembly is available with a PVC jacket and a copper inner conductor with silver plating. We offer a blue, 0.8-inch long TRB 3-slot to TRB 3-lug cable that operates at 500 MHz.This blue RF cable assembly is the most commonly utilized cable assembly in wide connectivity applications such as bus couplers, avionics control boxes, and bus relay. L-com's LC3MP2310-24 MIL-STD-1553 flexible RF cable assembly is available with PE dielectric. Our TRB 3-slot plug to TRB 3-lug jack cable has bayonet coupling connectors made of brass with nickel plating. This RF flexible 30-02003-LC twinax cable operates between -20 and 75 degrees Celsius.L-com has one of the largest in-stock selections of MIL-STD-1553 flexible RF cable assembly with same-day shipment for domestic and international orders. We are a global leader of wired and wireless connectivity products, offering a wide range of solutions across many key industries, including electronics, medical, industrial automation, military, and telecommunication. For further information on similar products, our expert technical support and trained sales team can get you the perfect TRB 3-slot plug to TRB 3-lug jack cable as per your requirements.
LC3MSA00456-60
The L-com LC3MSA00456-60 MIL-STD-1553 flexible RF cable assembly is perfect for applications that need tight bends and flexible cable. This TRB 3-slot to TRS subminiature cable assembly is plug to plug and made of 78 ohm flexible M17-176-00002-LC twinax. Our 78 Ohm cable assembly is available with a PFA jacket and a copper inner conductor with silver plating. We offer a blue, 0.57-inch OD TRB 3-slot to TRS subminiature cable that operates at 10 MHz.This blue RF cable assembly is the most commonly utilized cable assembly in wide connectivity applications such as bus couplers, avionics control boxes, and bus relay. L-com's LC3MSA00456-60 MIL-STD-1553 flexible RF cable assembly is available with PTFE dielectric. Our TRB 3-slot plug to TRS subminiature plug cable has bayonet coupling connectors made of brass with nickel plating. This RF flexible M17-176-00002-LC twinax cable operates between -55 and 200 degrees Celsius.L-com has one of the largest in-stock selections of MIL-STD-1553 flexible RF cable assembly with same-day shipment for domestic and international orders. We are a global leader of wired and wireless connectivity products, offering a wide range of solutions across many key industries, including electronics, medical, industrial automation, military, and telecommunication. For further information on similar products, our expert technical support and trained sales team can get you the perfect TRB 3-slot plug to TRS subminiature plug cable as per your requirements.
LCCA30340-FT4
L-com's LCCA30340-FT4 is a low loss 4.3-10 male to N female cable assembly using LMR-600 coax, 4 FT with Times Microwave components and ships same-day. The LMR-600 coax of this 4.3-10 cable uses the PE (F) dielectric with a VoP of 87%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com 4.3-10 to N cable assembly has a male to female gender configuration with flexible LMR-600 series coax and operates to 5.8 GHz. The double shield of this 4.3-10 cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this 4.3-10 male to 4.3-10 female cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30340-FT4 L-com Low Loss 4.3-10 Male to N Female Cable Assembly using LMR-600 Coax, 4 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
05GM3MX
Circular DIN connecteurs 3 broche mâle fiche
Recherche MPN Prend en charge la correspondance exacte, par préfixe et partielle. ⌄
Avertissement
Cstone est une usine professionnelle, et non une société de négoce, spécialisée dans les connecteurs RF et coaxiaux, les adaptateurs et les assemblages de câbles, notamment N-type, BNC, SMA, SMP, SSMB et MMCX. Nous fabriquons les connecteurs selon des plans 2D ou des échantillons ; l’adéquation, le MOQ, le délai et les détails de production sont confirmés par RFQ. Cstone Technology n’est pas affiliée aux marques d’origine. Les noms de fabricants, marques déposées, symboles et références de pièces sont utilisés uniquement à des fins d’identification et de référence croisée. Les marques restent la propriété de leurs détenteurs respectifs. L’adéquation finale est confirmée par examen du plan/des spécifications lors du RFQ.