Détails du produit
TRB 3-Slot Straight Plug 78 Ohm
Référence (MPN)
Impédance
78 Ohm
Interface
TRB 3-Slot
câble RF sur mesure depuis plan pour sourcing de production
câble RF sur mesure depuis plan orienté production avec revue de compatibilité, guidance MOQ et support de sourcing cost-down.
Quoi préparer avant le RFQ Des données claires réduisent les hypothèses et accélèrent la réponse. ⌄
- • Partagez le MPN de référence, la pièce homologue ou la marque source si c’est important pour la vérification.
- • Ajoutez le BOM, la répartition des quantités et la demande annuelle si le projet dépasse le volume prototype.
- • Joignez le plan, la fiche technique ou les exigences critiques d’impédance, fréquence, montage et revêtement.
Image
Cliquez pour agrandir.
Specifications
| Interface | Coaxial Cable Assemblies |
|---|---|
| Interface | 30-02001-LC |
| Interface | TRB 3-Slot |
| Interface | TRB 3-Slot |
| Impédance | 78 Ohm |
| Impédance | 78 Ohm |
| Impédance | 78 Ohm |
| Genre | Plug |
| Genre | Plug |
| Orientation | Straight |
| Orientation | Straight |
| Connector 1 Body Material | Brass |
Show 6 more specs
| Connector 1 Body Plating | Nickel |
|---|---|
| Connector 1 Polarity | Standard |
| Connector 2 Polarity | Standard |
| Type de câble | 30-02001-LC |
| Length, Max | 24 inches |
| Category | Coaxial Cable Assemblies |
Description
Données de référence actuelles pour LC3MSA00540-24 : TRB 3-Slot · 78 Ohm · Straight. Le catalogue indique la configuration suivante : Straight. L’impédance est indiquée comme 78 Ohm. Si ce paramètre est critique, confirmez-le à nouveau dans le RFQ. Si le montage manque ici, confirmez-le à partir du plan ou de l’exigence d’accouplement. Le matériau est indiqué comme Brass. Cela aide la revue, mais ne remplace pas la confirmation de la structure complète du projet. Utilisez cette page pour présélectionner avant le RFQ, pas comme validation finale.
Utilisez cette page pour présélectionner avant le RFQ. Le parcours d’approvisionnement et la production sur mesure MOQ 200+ sont confirmés après examen du plan/de la spécification/du BOM.
Connecteurs similaires
Ces modèles peuvent aussi vous intéresser :
557E113NF230B
capots arrière D-Sub SOLID BANDING BKSHLL END BAND SUPPLIED
LCCA30335-FT6
L-com low loss 7/16 DIN male to N male right angle cable assembly using LMR-600 coax, 6 FT with Times Microwave components is available for same day shipping from our facility. This high quality 7/16 DIN cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30335-FT6 7/16 DIN cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF low loss coaxial cable assemblies are built with 7/16 DIN connection on one end and right angle N connection on the other. This low loss 7/16 DIN to right angle N cable from L-com has a male to male gender combination. Our 7/16 DIN male to N male coaxial assembly part number LCCA30335-FT6 can also be known as low loss 7/16 DIN plug to right angle N plug cable assembly when using alternate gender names. 7/16 DIN plug to N plug cable assembly LCCA30335-FT6 is manufactured with a flexible coax. These flexible 7/16 DIN to N cable assemblies use LMR-600 coax and are double shielded. L-com double shielded low loss 7/16 DIN male to N male right angle cable assembly using LMR-600 coax, 6 FT with Times Microwave components is built from quality components by skilled assemblers with many years of experience.Maximum frequency for these 7/16 DIN to N M/M cables is 5.8 GHz. Technical performance specifications on these 5.8 GHz 7/16 DIN male to N right angle male cables are located on the LCCA30335-FT6 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a low loss right angle N male to 7/16 DIN male cable assembly because it can be used in the opposite direction.Low loss 7/16 DIN male to N male right angle cable assembly using LMR-600 coax, 6 FT with Times Microwave components is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our 7/16 DIN to right angle N cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our low loss 7/16 DIN male to N male right angle cable assembly using LMR-600 coax, 6 FT with Times Microwave components.
85069656
SPUMA cables offer easier handling and installation due to their flexibility. They provide lowest loss with halogen-free materials, shielding and VSWR optimisation up to 6 GHz.
PE3C8281
4.1/9.5 Mini DIN Male to 4.3-10 Male Right Angle Low PIM Cable Using TFT-5G-402 Coax Using Times Microwave Components
LC3MSA00225-12
The L-com LC3MSA00225-12 MIL-STD-1553 flexible RF cable assembly is perfect for applications that need tight bends and flexible cable. This TRB 3-slot to blunt cut cable assembly is plug to blunt cut and made of 78 ohm flexible TWCH-78-2-LC twinax. Our 78 Ohm cable assembly is available with a HF POF jacket and a copper inner conductor with silver plating. We offer a blue, 0.57-inch OD TRB 3-slot to blunt cut cable that operates at 500 MHz.This blue RF cable assembly is the most commonly utilized cable assembly in wide connectivity applications such as bus couplers, avionics control boxes, and bus relay. L-com's LC3MSA00225-12 MIL-STD-1553 flexible RF cable assembly is available with PE dielectric. Our TRB 3-slot plug to blunt cut cable has bayonet coupling connectors made of brass with nickel plating. This RF flexible TWCH-78-2-LC twinax cable operates between -30 and 80 degrees Celsius.L-com has one of the largest in-stock selections of MIL-STD-1553 flexible RF cable assembly with same-day shipment for domestic and international orders. We are a global leader of wired and wireless connectivity products, offering a wide range of solutions across many key industries, including electronics, medical, industrial automation, military, and telecommunication. For further information on similar products, our expert technical support and trained sales team can get you the perfect TRB 3-slot plug to blunt cut cable as per your requirements.
PE91256
4.1/9.5 Mini DIN Female to N Male Adapter, IP67 UnMated
Recherche MPN Prend en charge la correspondance exacte, par préfixe et partielle. ⌄
Avertissement
Cstone est une usine professionnelle, et non une société de négoce, spécialisée dans les connecteurs RF et coaxiaux, les adaptateurs et les assemblages de câbles, notamment N-type, BNC, SMA, SMP, SSMB et MMCX. Nous fabriquons les connecteurs selon des plans 2D ou des échantillons ; l’adéquation, le MOQ, le délai et les détails de production sont confirmés par RFQ. Cstone Technology n’est pas affiliée aux marques d’origine. Les noms de fabricants, marques déposées, symboles et références de pièces sont utilisés uniquement à des fins d’identification et de référence croisée. Les marques restent la propriété de leurs détenteurs respectifs. L’adéquation finale est confirmée par examen du plan/des spécifications lors du RFQ.