Détails du produit
FMCN1748 — SMA femelle Bulkhead montage connecteur à sertir/à souder Attachment pour RG55, RG142, RG223, RG141, .235 inch D Hole
Référence (MPN)
Fréquence
DC vers 12.4 GHz
câble RF sur mesure depuis plan pour sourcing de production
câble RF sur mesure depuis plan orienté production avec revue de compatibilité, guidance MOQ et support de sourcing cost-down.
Quoi préparer avant le RFQ Des données claires réduisent les hypothèses et accélèrent la réponse. ⌄
- • Partagez le MPN de référence, la pièce homologue ou la marque source si c’est important pour la vérification.
- • Ajoutez le BOM, la répartition des quantités et la demande annuelle si le projet dépasse le volume prototype.
- • Joignez le plan, la fiche technique ou les exigences critiques d’impédance, fréquence, montage et revêtement.
Image
Cliquez pour agrandir.
Specifications
| Interface | coaxial connecteurs |
|---|---|
| Fréquence (max) | DC vers 12.4 GHz |
| Signal Performance | 1.3: 1 |
| Electrical Rating | 500 Vrms |
| Terminaison | 1.005 in [25.53 mm] |
| Operating Temperature | -65 vers +165 deg C |
| Category | coaxial connecteurs |
Description
Données de référence actuelles pour FMCN1748 : DC vers 12.4 GHz. La fréquence est indiquée comme DC vers 12.4 GHz. La limite réelle dépend toujours de l’assemblage, de la pièce homologue et du contexte d’application. Pour les projets haute fréquence, joignez le plan, le chemin de câble et les exigences critiques dès le premier RFQ. Si le montage manque ici, confirmez-le à partir du plan ou de l’exigence d’accouplement. Utilisez cette page pour présélectionner avant le RFQ, pas comme validation finale.
Utilisez cette page pour présélectionner avant le RFQ. Le parcours d’approvisionnement et la production sur mesure MOQ 200+ sont confirmés après examen du plan/de la spécification/du BOM.
Connecteurs similaires
Ces modèles peuvent aussi vous intéresser :
LCCA30478-FT3
L-com SMA male right angle to N male right angle cable assembly using LC141TBJ coax, 3 FT is available for same day shipping from our facility. This high quality SMA cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30478-FT3 SMA cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF coaxial cable assemblies are built with right angle SMA connection on one end and right angle N connection on the other. This right angle SMA to right angle N cable from L-com has a male to male gender combination. Our SMA male to N male coaxial assembly part number LCCA30478-FT3 can also be known as right angle SMA plug to right angle N plug cable assembly when using alternate gender names. SMA plug to N plug cable assembly LCCA30478-FT3 is manufactured with a formable coax. These formable SMA to N cable assemblies use LC141TBJ coax and are single shielded. L-com single shielded SMA male right angle to N male right angle cable assembly using LC141TBJ coax, 3 FT is built from quality components by skilled assemblers with many years of experience.Maximum frequency for these SMA to N M/M cables is 10 GHz. Technical performance specifications on these 10 GHz SMA right angle male to N right angle male cables are located on the LCCA30478-FT3 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a right angle N male to right angle SMA male cable assembly because it can be used in the opposite direction.SMA male right angle to N male right angle cable assembly using LC141TBJ coax, 3 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our right angle SMA to right angle N cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our SMA male right angle to N male right angle cable assembly using LC141TBJ coax, 3 FT.
LCCA30273-FT6
L-com's LCCA30273-FT6 is a low loss SMA male to N female bulkhead cable assembly using LMR-240-DB coax, 6 FT with Times Microwave components and ships same-day. The LMR-240-DB coax of this SMA cable uses the PE (F) dielectric with a VoP of 84%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com SMA to N cable assembly has a male to female gender configuration with flexible LMR-240-DB series coax and operates to 5.8 GHz. The double shield of this SMA cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. L-com's RF cable assembly with N bulkhead interface enables system designers to have external connections on their product enclosures or to be used for other rack mount and panel mount applications. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this SMA male to SMA female cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30273-FT6 L-com Low Loss SMA Male to N Female Bulkhead Cable Assembly using LMR-240-DB Coax, 6 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
AXA-NMRSP
This N-Male to Reverse Polarity SMA Plug (RP-SMA) coaxial adapter provides the ability to connect between a N-Female and RP-SMA Jack interface. Interconnection of these interfaces is often found in test lab or in field environments where devices of differing interface types are interconnected.
MA-JJ-19
The MA-JJ-19 is an M adaptor connector. This connector is suitable for various high-frequency applications. It features a impedance Mismatch, operates up to 200MHz, and has a rated voltage of AC 500V, ensures a high insulation resistance (100MΩ(Min.) at DC 500V), a low contact resistance (3 mΩ(Max.). Withstanding temperatures from -40 to +85°C. The contact is made of Brass/Silver Plating, while the body is Brass/Nickel Plating. We can customize our products for you. We offer total customization, including changes to a product's shape, length, material, surface treatment, and packaging. Available from 1 piece for in-stock items.
RFC-NM-SMR-150
RF Cable Assemblies Low loss RF Cable, Cable length 1.5m, N Male to SMA Male RS connector
R191394027
SMA FEMALE - MMT FEMALE STRAIGHT ADAPTER
Recherche MPN Prend en charge la correspondance exacte, par préfixe et partielle. ⌄
Avertissement
Cstone est une usine professionnelle, et non une société de négoce, spécialisée dans les connecteurs RF et coaxiaux, les adaptateurs et les assemblages de câbles, notamment N-type, BNC, SMA, SMP, SSMB et MMCX. Nous fabriquons les connecteurs selon des plans 2D ou des échantillons ; l’adéquation, le MOQ, le délai et les détails de production sont confirmés par RFQ. Cstone Technology n’est pas affiliée aux marques d’origine. Les noms de fabricants, marques déposées, symboles et références de pièces sont utilisés uniquement à des fins d’identification et de référence croisée. Les marques restent la propriété de leurs détenteurs respectifs. L’adéquation finale est confirmée par examen du plan/des spécifications lors du RFQ.