Détails du produit
This Twin BNC Cable Series accommodates the need for low level signal patching and balanced line applications found in many test situations. Fittings have polarized, stepped keyways that look like, but do not mate with traditional BNC coaxial connectors. These Twin BNC connectors are constructed of machined brass with a non-tarnish nickel finish and gold plated contacts for resistance to corrosion and minimal signal loss. We stock these assemblies in 6 standard lengths from 1 to 10 ft.
Référence (MPN)
Impédance
78 Ohm
Interface
BNC Twinax
câble RF sur mesure depuis plan pour sourcing de production
câble RF sur mesure depuis plan orienté production avec revue de compatibilité, guidance MOQ et support de sourcing cost-down.
Quoi préparer avant le RFQ Des données claires réduisent les hypothèses et accélèrent la réponse. ⌄
- • Partagez le MPN de référence, la pièce homologue ou la marque source si c’est important pour la vérification.
- • Ajoutez le BOM, la répartition des quantités et la demande annuelle si le projet dépasse le volume prototype.
- • Joignez le plan, la fiche technique ou les exigences critiques d’impédance, fréquence, montage et revêtement.
Image
Cliquez pour agrandir.
Specifications
| Interface | Coaxial Cable Assemblies |
|---|---|
| Interface | BNC Twinax |
| Interface | BNC Twinax |
| Impédance | 78 Ohm |
| Impédance | 78 Ohm |
| Impédance | 78 Ohm |
| Genre | Plug |
| Genre | Plug |
| Orientation | Straight |
| Orientation | Straight |
| Connector 1 Body Material | Brass |
| Connector 1 Body Plating | Nickel |
Show 5 more specs
| Connector 1 Polarity | Standard |
|---|---|
| Connector 2 Polarity | Standard |
| Category | Coaxial Cable Assemblies |
| Application | Test and Measurement |
| Product Features | 78 Ohm low level signal patching and balance line applications; Available from stock in 6 lengths ranging from 1 to10 feet; Gold plated center contacts minimize signal loss; Nickel finish enhances corrosion resistance; Polarized interface assures proper connector mating |
Description
Données de référence actuelles pour CTC-3 : BNC Twinax · 78 Ohm · Straight. Le catalogue indique la configuration suivante : Straight. L’impédance est indiquée comme 78 Ohm. Si ce paramètre est critique, confirmez-le à nouveau dans le RFQ. Si le montage manque ici, confirmez-le à partir du plan ou de l’exigence d’accouplement. Le matériau est indiqué comme Brass. Cela aide la revue, mais ne remplace pas la confirmation de la structure complète du projet. Utilisez cette page pour présélectionner avant le RFQ, pas comme validation finale.
Utilisez cette page pour présélectionner avant le RFQ. Le parcours d’approvisionnement et la production sur mesure MOQ 200+ sont confirmés après examen du plan/de la spécification/du BOM.
Connecteurs similaires
Ces modèles peuvent aussi vous intéresser :
FMCA100036
Plenum Low Loss BNC Male to TNC Male Cable LMR-195-LLPX Coax
Telegartner: BNC Angle Plug Crimp G12
Telegartner: BNC Angle Plug Crimp G12, 75 Ohm, solder/crimp, A0504, G12 (0.315/1.95-3.7); TZC 75 24 (packed per 1)
FMC00338
MMCX Jack to BNC Male Cable RG-316 Coax
095-850-189-006
RF assemblage de câbles BNC ST fiche-BNC fiche Belden 4794R 2M
LCCA30304-FT4
L-com's LCCA30304-FT4 is a low loss BNC male to TNC male right angle cable assembly using LMR-400 coax, 4 FT with Times Microwave components and ships same-day. The LMR-400 coax of this BNC cable uses the PE (F) dielectric with a VoP of 85%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com BNC to TNC cable assembly has a male to male gender configuration with flexible LMR-400 series coax and operates to 6 GHz. The double shield of this BNC cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. This right angle TNC cable interface on the LMR-400 coax allows for easier connections in tight spaces. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this BNC male to BNC male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30304-FT4 L-com Low Loss BNC Male to TNC Male Right Angle Cable Assembly using LMR-400 Coax, 4 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
6274124-2
connecteurs RF / connecteurs coaxiaux prise BNC VERT PRESS FIT 75 Ω
Recherche MPN Prend en charge la correspondance exacte, par préfixe et partielle. ⌄
Avertissement
Les noms de fabricants, marques déposées, symboles et références de pièces sont utilisés uniquement à des fins d’identification et de référence croisée. Cstone Technology est un partenaire d’approvisionnement export basé en Chine pour des alternatives compatibles et n’est affilié à aucune marque d’origine. Les marques restent la propriété de leurs détenteurs respectifs. L’adéquation finale est confirmée par examen du plan/des spécifications lors du RFQ.