رفتن به محتوای اصلی
CSTONE
فهرست RFQ

جزئیات محصول

RFSMAA2JEGFFGE — Our SMA connector range are semi-precision and offer a 50 ohms impedance and a 0.25 - 36 threaded coupling. Offering high performance all within a compact SMA (Sub Miniature version A) connector design, frequently used as standard for antennas, devices and various medical applications.

جایگزین سازگار تأمین‌شده از چین — سازگاری با بررسی نقشه/مشخصات تأیید می‌شود.

شماره قطعه (MPN)

RFSMAA2JEGFFGE

Impedance

50Ohm

Interface

SMA Series

مجموعه کابل سفارشی RF از روی نقشه برای تأمین تولیدی

مجموعه کابل سفارشی RF از روی نقشه برای تأمین تولیدی با بررسی سازگاری، راهنمای MOQ و پشتیبانی کاهش هزینه.

کابل RF سفارشی از روی نقشه →
WhatsApp — پاسخ سریع
زمان تحویل: ۳–۶ هفته | MOQ: 200+ عدد
پیش از RFQ ورودی‌های واضح بررسی را سریع‌تر می‌کند. ⌄
  • • اگر برند یا خانواده قطعه مهم است، MPN مرجع و برند منبع را ارسال کنید.
  • • برای پروژه‌های تولیدی، BOM و تفکیک حجم را اضافه کنید.
  • • نقشه یا نیازهای کلیدی سازگاری را پیوست کنید.

تصویر

برای بزرگ‌نمایی روی تصویر کلیک کنید.

تصویر محصول

RFSMAA2JEGFFGE product photo

RFSMAA2JEGFFGE product photo

1 / 4

مشخصات

مشخصات RFSMAA2JEGFFGE
اینترفیسSMA Series
اینترفیسRF Connectors
اینترفیسSMA Series
امپدانس50Ohm
نصبPanel Mount, Through Hole
Body MaterialStainless Steel Passivation
ترمینیشنBeryllium Copper
درجه IPSMA Straight Jack 2 Hole Flange RF Connector
Maximum Voltage335V
Temperature range-65°C to +165°C
Frecuency range0GHz - 26.5GHz
VSWR<1.30
نمایش 14 مشخصه بیشتر
Dielectric withstanding Voltage>750V
CategoryRF Connectors
Product FeaturesSMA Series Pin with Extended PTFE 2 Hole Flange
range codeRFSMAA2WEPTFE Range
Part NumberRFSMAA2JEGFFGE
LifecycleNew From This Manufacturer
DeliveryDHL、UPS、FedEx、Registered Mail
PaymentT/T Paypal Visa MoneyGram Western Union
More InformationRFSMAA2JEGFFGE More Information
ECADRequest Free CAD Models
Model NumberRFSMAA2JEGFFGE
Signal Performance<1.30
Operating Temperature-65°C~165°C
Electrical Rating335 V

توضیح

داده مرجع فعلی برای RFSMAA2JEGFFGE: SMA Series · 50Ohm · Panel Mount, Through Hole. امپدانس به‌صورت 50Ohm ثبت شده است. اگر حیاتی است، دوباره در RFQ تأیید کنید. نصب به‌صورت Panel Mount, Through Hole ثبت شده است. اگر محدودیت پنل، عبور از بدنه یا فلنج مهم است، ابعاد را با RFQ ارسال کنید. جنس به‌صورت Stainless Steel Passivation ثبت شده است. برای بررسی مفید است، اما جایگزین تأیید کامل چیدمان پروژه نیست. از این صفحه برای تهیه فهرست کوتاه پیش از RFQ استفاده کنید، نه تأیید نهایی.

از این صفحه برای تهیه فهرست کوتاه پیش از RFQ استفاده کنید. مسیر تأمین و تولید سفارشی MOQ 200+ پس از بررسی نقشه/مشخصات/BOM تأیید می‌شود؛ موجودی آماده فرض نمی‌شود.

کانکتورهای مشابه

مدل‌های مرتبط:

LCCA30633-FT1

L-com SMA female bulkhead to TNC male right angle cable assembly using LC085TBJ coax, 1 FT is available for same day shipping from our facility. This high quality SMA cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30633-FT1 SMA cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF coaxial cable assemblies are built with SMA bulkhead connection on one end and right angle TNC connection on the other. This SMA to right angle TNC cable from L-com has a female to male gender combination. Our SMA female to TNC male coaxial assembly part number LCCA30633-FT1 can also be known as SMA jack to right angle TNC plug cable assembly when using alternate gender names. SMA jack to TNC plug cable assembly LCCA30633-FT1 is manufactured with a formable coax. These formable SMA to TNC cable assemblies use LC085TBJ coax and are single shielded. L-com single shielded SMA female bulkhead to TNC male right angle cable assembly using LC085TBJ coax, 1 FT is built from quality components by skilled assemblers with many years of experience.Maximum frequency for these SMA to TNC F/M cables is 6 GHz. Technical performance specifications on these 6 GHz SMA femalebulkhead to TNC right angle male cables are located on the LCCA30633-FT1 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a right angle TNC male to SMA female bulkhead cable assembly because it can be used in the opposite direction.SMA female bulkhead to TNC male right angle cable assembly using LC085TBJ coax, 1 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our SMA to right angle TNC cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our SMA female bulkhead to TNC male right angle cable assembly using LC085TBJ coax, 1 FT.

مشاهده جزئیات →

CONSMA017

RF Connectors Coaxial Connectors SMA Jack 50 Ohm Panel Mount

مشاهده جزئیات →

095-902-475-024

RF Cable Assemblies SMA SP to SMA SP on LMR-195 Cbl 24in

مشاهده جزئیات →

LCCA30387-FT10

L-com low loss MMCX plug right angle to SMA male right angle cable assembly using 100 series coax, 10 FT is available for same day shipping from our facility. This high quality MMCX cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30387-FT10 MMCX cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF low loss coaxial cable assemblies are built with right angle MMCX connection on one end and right angle SMA connection on the other. This low lossright angle MMCX to right angle SMA cable from L-com has a plug to male gender combination. Our MMCX plug to SMA male coaxial assembly part number LCCA30387-FT10 can also be known as low loss right angle MMCX male to right angle SMA plug cable assembly when using alternate gender names. MMCX male to SMA plug cable assembly LCCA30387-FT10 is manufactured with a flexible coax. These flexible MMCX to SMA cable assemblies use 100 Series coax (CA-100 flexible) and are double shielded. L-com double shielded low loss MMCX plug right angle to SMA male right angle cable assembly using 100 series coax, 10 FT is built from quality components by skilled assemblers with many years of experience.Maximum frequency for these MMCX to SMA plug/M cables is 5.8 GHz. Technical performance specifications on these 5.8 GHz MMCX right angle plug to SMA right angle male cables are located on the LCCA30387-FT10 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a low loss right angle SMA male to right angle MMCX plug cable assembly because it can be used in the opposite direction.Low loss MMCX plug right angle to SMA male right angle cable assembly using 100 series coax, 10 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our right angle MMCX to right angle SMA cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our low loss MMCX plug right angle to SMA male right angle cable assembly using 100 series coax, 10 FT.

مشاهده جزئیات →

LCCA30380-FT6

L-com low loss SMA male to MCX plug cable assembly using 100 series coax, 6 FT is available for same day shipping from our facility. This high quality SMA cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30380-FT6 SMA cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF low loss coaxial cable assemblies are built with SMA connection on one end and MCX connection on the other. This low loss SMA to MCX cable from L-com has a male to plug gender combination. Our SMA male to MCX plug coaxial assembly part number LCCA30380-FT6 can also be known as low loss SMA plug to MCX male cable assembly when using alternate gender names. SMA plug to MCX male cable assembly LCCA30380-FT6 is manufactured with a flexible coax. These flexible SMA to MCX cable assemblies use 100 Series coax (CA-100 flexible) and are double shielded. L-com double shielded low loss SMA male to MCX plug cable assembly using 100 series coax, 6 FT is built from quality components by skilled assemblers with many years of experience.Maximum frequency for these SMA to MCX M/plug cables is 3 GHz. Technical performance specifications on these 3 GHz SMA male to MCX plug cables are located on the LCCA30380-FT6 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a low loss MCX plug to SMA male cable assembly because it can be used in the opposite direction.Low loss SMA male to MCX plug cable assembly using 100 series coax, 6 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our SMA to MCX cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our low loss SMA male to MCX plug cable assembly using 100 series coax, 6 FT.

مشاهده جزئیات →

2-core (Zipcord) OM4 LC-FC

This product is an optical fiber cable pre-terminated with optical connectors. The standard cable color varies depending on the fiber mode. This is a 2-core (Zipcord) cable, multimode (OM4), with LC-FC connectors.Example model: TFC-2C-OM4-LC-FC-1mYou can select the fiber count (1-core/2-core/4-core), mode (single-mode (SM) / multimode (OM1–OM5), and connector type (SC/LC/ST/FC/MU/SMA905), and specify the overall length. Please refer to the specifications.Delivery is typically 2 to 5 weeks after order placement. Please contact us for details.

مشاهده جزئیات →
جستجوی MPN جستجوی دقیق، پیشوندی و جزئی پشتیبانی می‌شود. ⌄

جستجوی دقیق، پیشوندی و جزئی پشتیبانی می‌شود.

سلب مسئولیت

Cstone یک کارخانه تخصصی، نه شرکت بازرگانی، برای کانکتورهای RF و کواکسیال، آداپتورها و مجموعه‌های کابل از جمله N-type، BNC، SMA، SMP، SSMB و MMCX است. کانکتورها را بر اساس نقشه‌های 2D یا نمونه تولید می‌کنیم و سازگاری، MOQ، زمان تحویل و جزئیات تولید از طریق RFQ تأیید می‌شود. Cstone Technology با برندهای اصلی وابستگی ندارد. نام سازندگان، علائم تجاری، نمادها و شماره قطعات فقط برای شناسایی و تطبیق مرجع استفاده می‌شوند. علائم تجاری متعلق به مالکان مربوطه هستند. مناسب بودن نهایی در مرحله RFQ با بررسی نقشه/مشخصات تأیید می‌شود.