جزئیات محصول
TNC Male to Male Radius Right Angle Adapter, VSWR 1.2 Max. DC-18GHz
شماره قطعه (MPN)
Impedance
50 Ohm
Frequency
DC
Interface
TNC
مجموعه کابل سفارشی RF از روی نقشه برای تأمین تولیدی
مجموعه کابل سفارشی RF از روی نقشه برای تأمین تولیدی با بررسی سازگاری، راهنمای MOQ و پشتیبانی کاهش هزینه.
پیش از RFQ ورودیهای واضح بررسی را سریعتر میکند. ⌄
- • اگر برند یا خانواده قطعه مهم است، MPN مرجع و برند منبع را ارسال کنید.
- • برای پروژههای تولیدی، BOM و تفکیک حجم را اضافه کنید.
- • نقشه یا نیازهای کلیدی سازگاری را پیوست کنید.
تصویر
برای بزرگنمایی روی تصویر کلیک کنید.
مشخصات
| اینترفیس | Adapters |
|---|---|
| اینترفیس | TNC |
| اینترفیس | TNC |
| امپدانس | 50 Ohm |
| امپدانس | 50 Ohm |
| فرکانس (حداکثر) | DC |
| فرکانس (حداکثر) | 18 GHz |
| جنسیت | Plug |
| جنسیت | Plug |
| Adapter Body Style | Radius Right Angle |
| Connector Body Material 1 | Passivated Stainless Steel |
| Connector Body Material 2 | Passivated Stainless Steel |
نمایش 3 مشخصه بیشتر
| Connector Polarity 1 | Standard |
|---|---|
| Connector Polarity 2 | Standard |
| Category | Adapters |
توضیح
داده مرجع فعلی برای PE91790: TNC · 50 Ohm · DC. امپدانس بهصورت 50 Ohm ثبت شده است. اگر حیاتی است، دوباره در RFQ تأیید کنید. فرکانس بهصورت DC ثبت شده است. حد واقعی هنوز به مجموعه، جفت اتصال و کاربرد وابسته است. اگر نصب اینجا نیست، آن را از روی نقشه یا نیاز اتصال تأیید کنید. جنس بهصورت Passivated Stainless Steel ثبت شده است. برای بررسی مفید است، اما جایگزین تأیید کامل چیدمان پروژه نیست. از این صفحه برای تهیه فهرست کوتاه پیش از RFQ استفاده کنید، نه تأیید نهایی.
از این صفحه برای تهیه فهرست کوتاه پیش از RFQ استفاده کنید. مسیر تأمین و تولید سفارشی MOQ 200+ پس از بررسی نقشه/مشخصات/BOM تأیید میشود؛ موجودی آماده فرض نمیشود.
کانکتورهای مشابه
مدلهای مرتبط:
LCCA30280-FT3
L-com's LCCA30280-FT3 is a low loss N male to TNC male right angle cable assembly using LMR-240-DB coax, 3 FT with Times Microwave components and ships same-day. The LMR-240-DB coax of this N cable uses the PE (F) dielectric with a VoP of 84%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com N to TNC cable assembly has a male to male gender configuration with flexible LMR-240-DB series coax and operates to 5.8 GHz. The double shield of this N cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. This right angle TNC cable interface on the LMR-240-DB coax allows for easier connections in tight spaces. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N male to N male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30280-FT3 L-com Low Loss N Male to TNC Male Right Angle Cable Assembly using LMR-240-DB Coax, 3 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
122413RP-10
RP-TNC Jack Bulkhead Rear Mount 50 Ohm
CCNTN2-MM-LL335-26
RF Cable Assemblies 26in N/TNC RA RA M/M Loss.20dB/ft at18GHz
CA-TMNMA004
High quality fully tested TNC Male to N-Male cable assemblies featuring high performance low loss 195-series coax cable. Not exactly what you are looking for? Build your own cable assembly with our Custom Product Configurator. Not sure what connector your radio has. Use our Radio to Connector-Type Cross-Reference.
LCCA30233-FT6
L-com's LCCA30233-FT6 is a low loss N male to TNC male cable assembly using LMR-195-FR coax, 6 FT with Times Microwave components and ships same-day. The LMR-195-FR coax of this N cable uses the PE dielectric with a VoP of 76%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com N to TNC cable assembly has a male to male gender configuration with flexible LMR-195-FR series coax and operates to 5.8 GHz. The double shield of this N cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N male to N male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30233-FT6 L-com Low Loss N Male to TNC Male Cable Assembly using LMR-195-FR Coax, 6 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
FMAT7449-20
20dB DC Bias Attenuator 50 Ohm TNC Male (Plug) to 50 Ohm TNC Female (Jack) Up to 3 GHz Rated to 2 Watts Brass Tri-Metal Body, 1.35:1 VSWR
جستجوی MPN جستجوی دقیق، پیشوندی و جزئی پشتیبانی میشود. ⌄
سلب مسئولیت
نام سازندگان، علائم تجاری، نمادها و شماره قطعات فقط برای شناسایی و تطبیق مرجع استفاده میشوند. Cstone Technology شریک تأمین صادراتی مستقر در چین برای جایگزینهای سازگار است و به برندهای اصلی وابسته نیست. علائم تجاری متعلق به مالکان مربوطه هستند. مناسب بودن نهایی در مرحله RFQ با بررسی نقشه/مشخصات تأیید میشود.