CSTONE
فهرست RFQ

جزئیات محصول

L-com N male right angle to SMA female cable assembly using LC141TBJ coax, 6 FT is available for same day shipping from our facility. This high quality N cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30482-FT6 N cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF coaxial cable assemblies are built with right angle N connection on one end and SMA connection on the other. This right angle N to SMA cable from L-com has a male to female gender combination. Our N male to SMA female coaxial assembly part number LCCA30482-FT6 can also be known as right angle N plug to SMA jack cable assembly when using alternate gender names. N plug to SMA jack cable assembly LCCA30482-FT6 is manufactured with a formable coax.Maximum frequency for these N to SMA M/F cables is 10 GHz. Technical performance specifications on these 10 GHz N right angle male to SMA female cables are located on the LCCA30482-FT6 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a SMA female to right angle N male cable assembly because it can be used in the opposite direction.N male right angle to SMA female cable assembly using LC141TBJ coax, 6 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our right angle N to SMA cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our N male right angle to SMA female cable assembly using LC141TBJ coax, 6 FT.

جایگزین سازگار تأمین‌شده از چین — سازگاری با بررسی نقشه/مشخصات تأیید می‌شود.

شماره قطعه (MPN)

LCCA30482-FT6

Impedance

50 Ohm

Interface

N

مجموعه کابل سفارشی RF از روی نقشه برای تأمین تولیدی

مجموعه کابل سفارشی RF از روی نقشه برای تأمین تولیدی با بررسی سازگاری، راهنمای MOQ و پشتیبانی کاهش هزینه.

کابل RF سفارشی از روی نقشه →
WhatsApp — پاسخ سریع
زمان تحویل: ۳–۶ هفته | MOQ: 200+ عدد
پیش از RFQ ورودی‌های واضح بررسی را سریع‌تر می‌کند.
  • اگر برند یا خانواده قطعه مهم است، MPN مرجع و برند منبع را ارسال کنید.
  • برای پروژه‌های تولیدی، BOM و تفکیک حجم را اضافه کنید.
  • نقشه یا نیازهای کلیدی سازگاری را پیوست کنید.

تصویر

برای بزرگ‌نمایی روی تصویر کلیک کنید.

تصویر محصول

LCCA30482-FT6 product photo

LCCA30482-FT6 product photo

مشخصات

مشخصات LCCA30482-FT6
اینترفیسCoaxial Cable Assemblies
اینترفیسLC141TBJ
اینترفیسN
اینترفیسSMA
امپدانس50 Ohm
امپدانس50 Ohm
امپدانس50 Ohm
جنسیتMale
جنسیتFemale
جهت‌گیریRight Angle
جهت‌گیریStraight
Connector 1 Body MaterialBrass
نمایش 7 مشخصه بیشتر
Connector 1 Body PlatingNickel
Connector 1 PolarityStandard
Connector 2 PolarityStandard
نوع کابلLC141TBJ
CategoryCoaxial Cable Assemblies
ApplicationMax Frequency 10 GHz; Shielding Effectivity > 100dB; PTFE Dielectric with 69.9% VoP; Hand Formable; Tin Filled Copper Braid Outer Conductor
Product FeaturesGeneral Purpose; Laboratory Use; System Interconnect

توضیح

داده مرجع فعلی برای LCCA30482-FT6: N · 50 Ohm · Right Angle. کاتالوگ فعلاً این پیکربندی را نشان می‌دهد: Right Angle. امپدانس به‌صورت 50 Ohm ثبت شده است. اگر حیاتی است، دوباره در RFQ تأیید کنید. اگر نصب اینجا نیست، آن را از روی نقشه یا نیاز اتصال تأیید کنید. جنس به‌صورت Brass ثبت شده است. برای بررسی مفید است، اما جایگزین تأیید کامل چیدمان پروژه نیست. از این صفحه برای تهیه فهرست کوتاه پیش از RFQ استفاده کنید، نه تأیید نهایی.

از این صفحه برای تهیه فهرست کوتاه پیش از RFQ استفاده کنید. مسیر تأمین و تولید سفارشی MOQ 200+ پس از بررسی نقشه/مشخصات/BOM تأیید می‌شود؛ موجودی آماده فرض نمی‌شود.

کانکتورهای مشابه

مدل‌های مرتبط:

SMA6100-9142

SMA reverse polarity plug crimp right angle for RG142,RG400; 6GHz VSWR1.25

مشاهده جزئیات →

FMCA1567

Slide-On BMA Plug Bulkhead to SMA Male Cable FM-SR086TBJ Coax

مشاهده جزئیات →

A90N80-85S-

SMA reverse polarity jack to N jack using .085 conformable

مشاهده جزئیات →

PE51713

SMA Female Commercial Grade Connector Solder Attachment Thru Hole PCB

مشاهده جزئیات →

095-909-195-012

N-Type Straight Plug to SMA Straight Plug RG-142 50 Ohm 12 Inches

مشاهده جزئیات →

LCCA30380-FT3

L-com low loss SMA male to MCX plug cable assembly using 100 series coax, 3 FT is available for same day shipping from our facility. This high quality SMA cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30380-FT3 SMA cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF low loss coaxial cable assemblies are built with SMA connection on one end and MCX connection on the other. This low loss SMA to MCX cable from L-com has a male to plug gender combination. Our SMA male to MCX plug coaxial assembly part number LCCA30380-FT3 can also be known as low loss SMA plug to MCX male cable assembly when using alternate gender names. SMA plug to MCX male cable assembly LCCA30380-FT3 is manufactured with a flexible coax. These flexible SMA to MCX cable assemblies use 100 Series coax (CA-100 flexible) and are double shielded. L-com double shielded low loss SMA male to MCX plug cable assembly using 100 series coax, 3 FT is built from quality components by skilled assemblers with many years of experience.Maximum frequency for these SMA to MCX M/plug cables is 3 GHz. Technical performance specifications on these 3 GHz SMA male to MCX plug cables are located on the LCCA30380-FT3 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a low loss MCX plug to SMA male cable assembly because it can be used in the opposite direction.Low loss SMA male to MCX plug cable assembly using 100 series coax, 3 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our SMA to MCX cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our low loss SMA male to MCX plug cable assembly using 100 series coax, 3 FT.

مشاهده جزئیات →
جستجوی MPN جستجوی دقیق، پیشوندی و جزئی پشتیبانی می‌شود.

جستجوی دقیق، پیشوندی و جزئی پشتیبانی می‌شود.

سلب مسئولیت

Cstone یک کارخانه تخصصی، نه شرکت بازرگانی، برای کانکتورهای RF و کواکسیال، آداپتورها و مجموعه‌های کابل از جمله N-type، BNC، SMA، SMP، SSMB و MMCX است. کانکتورها را بر اساس نقشه‌های 2D یا نمونه تولید می‌کنیم و سازگاری، MOQ، زمان تحویل و جزئیات تولید از طریق RFQ تأیید می‌شود. Cstone Technology با برندهای اصلی وابستگی ندارد. نام سازندگان، علائم تجاری، نمادها و شماره قطعات فقط برای شناسایی و تطبیق مرجع استفاده می‌شوند. علائم تجاری متعلق به مالکان مربوطه هستند. مناسب بودن نهایی در مرحله RFQ با بررسی نقشه/مشخصات تأیید می‌شود.