CSTONE
فهرست RFQ

جزئیات محصول

L-com's LCCA30337-FT5 is a low loss 7/16 DIN male to N female bulkhead cable assembly using LMR-600 coax, 5 FT with Times Microwave components and ships same-day. The LMR-600 coax of this 7/16 DIN cable uses the PE (F) dielectric with a VoP of 87%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com 7/16 DIN to N cable assembly has a male to female gender configuration with flexible LMR-600 series coax and operates to 5.8 GHz. The double shield of this 7/16 DIN cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. L-com's RF cable assembly with N bulkhead interface enables system designers to have external connections on their product enclosures or to be used for other rack mount and panel mount applications. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this 7/16 DIN male to 7/16 DIN female cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30337-FT5 L-com Low Loss 7/16 DIN Male to N Female Bulkhead Cable Assembly using LMR-600 Coax, 5 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.

جایگزین سازگار تأمین‌شده از چین — سازگاری با بررسی نقشه/مشخصات تأیید می‌شود.

شماره قطعه (MPN)

LCCA30337-FT5

Impedance

50 Ohm

Interface

7/16 DIN

مجموعه کابل سفارشی RF از روی نقشه برای تأمین تولیدی

مجموعه کابل سفارشی RF از روی نقشه برای تأمین تولیدی با بررسی سازگاری، راهنمای MOQ و پشتیبانی کاهش هزینه.

کابل RF سفارشی از روی نقشه →
WhatsApp — پاسخ سریع
زمان تحویل: ۳–۶ هفته | MOQ: 200+ عدد
پیش از RFQ ورودی‌های واضح بررسی را سریع‌تر می‌کند.
  • اگر برند یا خانواده قطعه مهم است، MPN مرجع و برند منبع را ارسال کنید.
  • برای پروژه‌های تولیدی، BOM و تفکیک حجم را اضافه کنید.
  • نقشه یا نیازهای کلیدی سازگاری را پیوست کنید.

تصویر

برای بزرگ‌نمایی روی تصویر کلیک کنید.

تصویر محصول

LCCA30337-FT5 product photo

LCCA30337-FT5 product photo

مشخصات

مشخصات LCCA30337-FT5
اینترفیسCoaxial Cable Assemblies
اینترفیسLMR-600
اینترفیس7/16 DIN
اینترفیسN
امپدانس50 Ohm
امپدانس50 Ohm
امپدانس50 Ohm
جنسیتMale
جنسیتFemale
جهت‌گیریStraight
جهت‌گیریStraight
Connector 1 Body MaterialBrass
نمایش 6 مشخصه بیشتر
Connector 1 Body PlatingTri-Metal
Connector 1 PolarityStandard
Connector 2 PolarityStandard
نصبBulkhead
نوع کابلLMR-600
CategoryCoaxial Cable Assemblies

توضیح

داده مرجع فعلی برای LCCA30337-FT5: 7/16 DIN · 50 Ohm · Bulkhead. کاتالوگ فعلاً این پیکربندی را نشان می‌دهد: Straight. امپدانس به‌صورت 50 Ohm ثبت شده است. اگر حیاتی است، دوباره در RFQ تأیید کنید. نصب به‌صورت Bulkhead ثبت شده است. اگر محدودیت پنل، عبور از بدنه یا فلنج مهم است، ابعاد را با RFQ ارسال کنید. جنس به‌صورت Brass ثبت شده است. برای بررسی مفید است، اما جایگزین تأیید کامل چیدمان پروژه نیست. از این صفحه برای تهیه فهرست کوتاه پیش از RFQ استفاده کنید، نه تأیید نهایی.

از این صفحه برای تهیه فهرست کوتاه پیش از RFQ استفاده کنید. مسیر تأمین و تولید سفارشی MOQ 200+ پس از بررسی نقشه/مشخصات/BOM تأیید می‌شود؛ موجودی آماده فرض نمی‌شود.

کانکتورهای مشابه

مدل‌های مرتبط:

02K150-G300

RF Connectors / Coaxial Connectors SLIDING LOAD

مشاهده جزئیات →

L717DB25PAM4B

D-Sub Standard Connectors Dsub, Machined signal 7.5A, Right Angle PCB Thru Hole, FP=14.84mm, Cnt Tail 0.6mm, 25 Pin, Bright Tin Shell+Grounding Dimples, Flash Gold, 3.1mm (.122 in) Clear Hole, Metal R/A Bracket Without Boardlock

مشاهده جزئیات →

MD-80SMK

DIN Connectors Mini Din Connectors

مشاهده جزئیات →

PE3C8247

4.3-10 Male to 7/16 DIN Male Low PIM Cable Using TFT-402 Coax Using Times Microwave Components

مشاهده جزئیات →

CA-6DMDM125

High quality fully tested 7/16 DIN Male to 7/16 DIN Male cable assemblies featuring high performance 600-Series coax cable. These coax cables have excellent low loss characteristics. Not exactly what you are looking for? Build your own cable assembly with our Custom Product Configurator.

مشاهده جزئیات →

LCCA30218-FT4

L-com's LCCA30218-FT4 is a low loss 4.3-10 male to 4.3-10 male cable assembly using LMR-600-DB coax, 4 FT with Times Microwave components and ships same-day. The LMR-600-DB coax of this 4.3-10 cable uses the PE (F) dielectric with a VoP of 87%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com 4.3-10 to 4.3-10 cable assembly has a male to male gender configuration with flexible LMR-600-DB series coax and operates to 5.8 GHz. The double shield of this 4.3-10 cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this 4.3-10 male to 4.3-10 male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30218-FT4 L-com Low Loss 4.3-10 Male to 4.3-10 Male Cable Assembly using LMR-600-DB Coax, 4 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.

مشاهده جزئیات →
جستجوی MPN جستجوی دقیق، پیشوندی و جزئی پشتیبانی می‌شود.

جستجوی دقیق، پیشوندی و جزئی پشتیبانی می‌شود.

سلب مسئولیت

نام سازندگان، علائم تجاری، نمادها و شماره قطعات فقط برای شناسایی و تطبیق مرجع استفاده می‌شوند. Cstone Technology شریک تأمین صادراتی مستقر در چین برای جایگزین‌های سازگار است و به برندهای اصلی وابسته نیست. علائم تجاری متعلق به مالکان مربوطه هستند. مناسب بودن نهایی در مرحله RFQ با بررسی نقشه/مشخصات تأیید می‌شود.