CSTONE
فهرست RFQ

جزئیات محصول

L-com's LCCA30306-FT10 is a low loss N male right angle to TNC male cable assembly using LMR-400 coax, 10 FT with Times Microwave components and ships same-day. The LMR-400 coax of this N cable uses the PE (F) dielectric with a VoP of 85%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com N to TNC cable assembly has a male to male gender configuration with flexible LMR-400 series coax and operates to 6 GHz. The double shield of this N cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. This right angle N cable interface on the LMR-400 coax allows for easier connections in tight spaces. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N male to N male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30306-FT10 L-com Low Loss N Male Right Angle to TNC Male Cable Assembly using LMR-400 Coax, 10 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.

جایگزین سازگار تأمین‌شده از چین — سازگاری با بررسی نقشه/مشخصات تأیید می‌شود.

شماره قطعه (MPN)

LCCA30306-FT10

Impedance

50 Ohm

Interface

N

مجموعه کابل سفارشی RF از روی نقشه برای تأمین تولیدی

مجموعه کابل سفارشی RF از روی نقشه برای تأمین تولیدی با بررسی سازگاری، راهنمای MOQ و پشتیبانی کاهش هزینه.

کابل RF سفارشی از روی نقشه →
WhatsApp — پاسخ سریع
زمان تحویل: ۳–۶ هفته | MOQ: 200+ عدد
پیش از RFQ ورودی‌های واضح بررسی را سریع‌تر می‌کند.
  • اگر برند یا خانواده قطعه مهم است، MPN مرجع و برند منبع را ارسال کنید.
  • برای پروژه‌های تولیدی، BOM و تفکیک حجم را اضافه کنید.
  • نقشه یا نیازهای کلیدی سازگاری را پیوست کنید.

تصویر

برای بزرگ‌نمایی روی تصویر کلیک کنید.

تصویر محصول

LCCA30306-FT10 product photo

LCCA30306-FT10 product photo

مشخصات

مشخصات LCCA30306-FT10
اینترفیسCoaxial Cable Assemblies
اینترفیسLMR-400
اینترفیسN
اینترفیسTNC
امپدانس50 Ohm
امپدانس50 Ohm
امپدانس50 Ohm
جنسیتMale
جنسیتMale
جهت‌گیریRight Angle
جهت‌گیریStraight
Connector 1 Body MaterialBrass
نمایش 5 مشخصه بیشتر
Connector 1 Body PlatingTri-Metal
Connector 1 PolarityStandard
Connector 2 PolarityStandard
نوع کابلLMR-400
CategoryCoaxial Cable Assemblies

توضیح

داده مرجع فعلی برای LCCA30306-FT10: N · 50 Ohm · Right Angle. کاتالوگ فعلاً این پیکربندی را نشان می‌دهد: Right Angle. امپدانس به‌صورت 50 Ohm ثبت شده است. اگر حیاتی است، دوباره در RFQ تأیید کنید. اگر نصب اینجا نیست، آن را از روی نقشه یا نیاز اتصال تأیید کنید. جنس به‌صورت Brass ثبت شده است. برای بررسی مفید است، اما جایگزین تأیید کامل چیدمان پروژه نیست. از این صفحه برای تهیه فهرست کوتاه پیش از RFQ استفاده کنید، نه تأیید نهایی.

از این صفحه برای تهیه فهرست کوتاه پیش از RFQ استفاده کنید. مسیر تأمین و تولید سفارشی MOQ 200+ پس از بررسی نقشه/مشخصات/BOM تأیید می‌شود؛ موجودی آماده فرض نمی‌شود.

کانکتورهای مشابه

مدل‌های مرتبط:

031-71063

TNC Straight PCB Jack Through Hole 75 Ohm

مشاهده جزئیات →

N80T30-5005-18G

18GHz RL-17.7dB test cable: N jack to TNC plug using 5005

مشاهده جزئیات →

PE44898

TNC Female Bulkhead Mount Connector Solder Attachment for PE-SR405AL, PE-SR405FL, PE-SR405FLJ, PE-SR405TN, RG405, IP67 Rated

مشاهده جزئیات →

R412511124

Attenuators - Interconnects ATT TNC 11dB 3GHZ 1W

مشاهده جزئیات →

LCCA30271-FT10

L-com's LCCA30271-FT10 is a low loss N female bulkhead to TNC male right angle cable assembly using LMR-240 coax, 10 FT with Times Microwave components and ships same-day. The LMR-240 coax of this N cable uses the PE (F) dielectric with a VoP of 84%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com N to TNC cable assembly has a female to male gender configuration with flexible LMR-240 series coax and operates to 5.8 GHz. The double shield of this N cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. L-com's RF cable assembly with N bulkhead interface enables system designers to have external connections on their product enclosures or to be used for other rack mount and panel mount applications. This right angle TNC cable interface on the LMR-240 coax allows for easier connections in tight spaces. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N female to N male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30271-FT10 L-com Low Loss N Female Bulkhead to TNC Male Right Angle Cable Assembly using LMR-240 Coax, 10 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.

مشاهده جزئیات →

PE9219

Precision TNC Male to 7mm Adapter

مشاهده جزئیات →
جستجوی MPN جستجوی دقیق، پیشوندی و جزئی پشتیبانی می‌شود.

جستجوی دقیق، پیشوندی و جزئی پشتیبانی می‌شود.

سلب مسئولیت

Cstone یک کارخانه تخصصی، نه شرکت بازرگانی، برای کانکتورهای RF و کواکسیال، آداپتورها و مجموعه‌های کابل از جمله N-type، BNC، SMA، SMP، SSMB و MMCX است. کانکتورها را بر اساس نقشه‌های 2D یا نمونه تولید می‌کنیم و سازگاری، MOQ، زمان تحویل و جزئیات تولید از طریق RFQ تأیید می‌شود. Cstone Technology با برندهای اصلی وابستگی ندارد. نام سازندگان، علائم تجاری، نمادها و شماره قطعات فقط برای شناسایی و تطبیق مرجع استفاده می‌شوند. علائم تجاری متعلق به مالکان مربوطه هستند. مناسب بودن نهایی در مرحله RFQ با بررسی نقشه/مشخصات تأیید می‌شود.