جزئیات محصول
L-com's LCCA30189-FT4 is a low loss 4.3-10 male to 4.3-10 male cable assembly using LMR-400 coax, 4 FT with Times Microwave components and ships same-day. The LMR-400 coax of this 4.3-10 cable uses the PE (F) dielectric with a VoP of 85%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com 4.3-10 to 4.3-10 cable assembly has a male to male gender configuration with flexible LMR-400 series coax and operates to 6 GHz. The double shield of this 4.3-10 cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this 4.3-10 male to 4.3-10 male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30189-FT4 L-com Low Loss 4.3-10 Male to 4.3-10 Male Cable Assembly using LMR-400 Coax, 4 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
شماره قطعه (MPN)
Impedance
50 Ohm
Interface
4.3-10
مجموعه کابل سفارشی RF از روی نقشه برای تأمین تولیدی
مجموعه کابل سفارشی RF از روی نقشه برای تأمین تولیدی با بررسی سازگاری، راهنمای MOQ و پشتیبانی کاهش هزینه.
پیش از RFQ ورودیهای واضح بررسی را سریعتر میکند. ⌄
- • اگر برند یا خانواده قطعه مهم است، MPN مرجع و برند منبع را ارسال کنید.
- • برای پروژههای تولیدی، BOM و تفکیک حجم را اضافه کنید.
- • نقشه یا نیازهای کلیدی سازگاری را پیوست کنید.
تصویر
برای بزرگنمایی روی تصویر کلیک کنید.
مشخصات
| اینترفیس | Coaxial Cable Assemblies |
|---|---|
| اینترفیس | LMR-400 |
| اینترفیس | 4.3-10 |
| اینترفیس | 4.3-10 |
| امپدانس | 50 Ohm |
| امپدانس | 50 Ohm |
| امپدانس | 50 Ohm |
| جنسیت | Male |
| جنسیت | Male |
| جهتگیری | Straight |
| جهتگیری | Straight |
| Connector 1 Body Material | Brass |
نمایش 5 مشخصه بیشتر
| Connector 1 Body Plating | Tri-Metal |
|---|---|
| Connector 1 Polarity | Standard |
| Connector 2 Polarity | Standard |
| نوع کابل | LMR-400 |
| Category | Coaxial Cable Assemblies |
توضیح
داده مرجع فعلی برای LCCA30189-FT4: 4.3-10 · 50 Ohm · Straight. کاتالوگ فعلاً این پیکربندی را نشان میدهد: Straight. امپدانس بهصورت 50 Ohm ثبت شده است. اگر حیاتی است، دوباره در RFQ تأیید کنید. اگر نصب اینجا نیست، آن را از روی نقشه یا نیاز اتصال تأیید کنید. جنس بهصورت Brass ثبت شده است. برای بررسی مفید است، اما جایگزین تأیید کامل چیدمان پروژه نیست. از این صفحه برای تهیه فهرست کوتاه پیش از RFQ استفاده کنید، نه تأیید نهایی.
از این صفحه برای تهیه فهرست کوتاه پیش از RFQ استفاده کنید. مسیر تأمین و تولید سفارشی MOQ 200+ پس از بررسی نقشه/مشخصات/BOM تأیید میشود؛ موجودی آماده فرض نمیشود.
کانکتورهای مشابه
مدلهای مرتبط:
CA4NFLPNM002
The CA4NFLPNF series are high performance low loss 400-series cable assemblies that feature a N-Female connector to an in-line N-Male gas discharge tube lightning protector attached directly to the cable. This not only reduces the cost since a connector is eliminated, but helps reduce return loss and insertion loss. These cable assemblies feature L-com's CA-400 which is a UV resistant polyethylene jacketed high performance flexible low loss coaxial cable. Attached directly to the cable is L-com's AL6-NM-14-9 5.8 GHz coaxial lightning protector. With a replaceable gas tube element, multi-strike capability and fast response time, they are suitable for a wide range of applications. A ground lug and terminal is provided directly on the lightning protector housing, which provides superior grounding. Custom lengths and connectors are also available. Contact L-com sales for more information. For additional information and complete specification, please see the data sheet in the Downloads section. Note: The lightning protector can also be purchased separately, see AL6-NM-14-9.
85259496
MICROBEND features include 35 % lower loss than 0.047-inch semi-rigid cable, a minimum bend radius of 1.52 mm (0.060 inch) and triple shielding for high isolation. MICROBEND assemblies are available with a wide range of connector interfaces.
85076209
HUBER+SUHNER N connectors perform to a maximum frequency of up to 18 GHz, depending on the connector and cable type.
ST3D514
7/16 DIN Female (Jack) Termination (Load) 100 Watts High Power To 2.7 GHz, Low PIM Paint Plated Aluminum, 1.2 VSWR
TC-195-NMH-RA-D-LC
L-com's N Male connector for LMR-195, LMR-195-DB, LMR-195-FR and 195-Series coax uses a Crimp/Solder attachment method. This N connector is one of the many RF coaxial connectors in L-com’s product line up and like all our products, they will ship the same day. Our N Male connector operates up to a maximum frequency of 6 GHz. The specifications and a basic dimensional drawing for TC-195-NMH-RA-D-LC Male N connector can be found in this datasheet PDF. L-com's portfolio of RF and microwave connectors allows users to choose from a large number of options when building assemblies to fit their RF interconnect needs. RF cables can be created to fulfill many interconnect applications ranging from In the Box hookup, test equipment connectivity or as part of a system installation. In addition to an offering of RF connectors and coaxial cable L-com offers both standard and custom cable assemblies to fit a customer's specific needs.
LCCA30188-FT2
L-com's LCCA30188-FT2 is a low loss 7/16 DIN male to 7/16 DIN male right angle cable assembly using LMR-400 coax, 2 FT with Times Microwave components and ships same-day. The LMR-400 coax of this 7/16 DIN cable uses the PE (F) dielectric with a VoP of 85%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com 7/16 DIN to 7/16 DIN cable assembly has a male to male gender configuration with flexible LMR-400 series coax and operates to 6 GHz. The double shield of this 7/16 DIN cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. This right angle 7/16 DIN cable interface on the LMR-400 coax allows for easier connections in tight spaces. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this 7/16 DIN male to 7/16 DIN male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30188-FT2 L-com Low Loss 7/16 DIN Male to 7/16 DIN Male Right Angle Cable Assembly using LMR-400 Coax, 2 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
جستجوی MPN جستجوی دقیق، پیشوندی و جزئی پشتیبانی میشود. ⌄
سلب مسئولیت
نام سازندگان، علائم تجاری، نمادها و شماره قطعات فقط برای شناسایی و تطبیق مرجع استفاده میشوند. Cstone Technology شریک تأمین صادراتی مستقر در چین برای جایگزینهای سازگار است و به برندهای اصلی وابسته نیست. علائم تجاری متعلق به مالکان مربوطه هستند. مناسب بودن نهایی در مرحله RFQ با بررسی نقشه/مشخصات تأیید میشود.