جزئیات محصول
High quality fully tested NMO/TAD Mobile Mount to Reverse Polarity SMA Plug cable assemblies featuring high performance low loss 195-series coax cable. The NMO-Series mounts are well suited for applications where mobility is required. Constructed with a solid brass threaded mount with gold plated center contact. Mounts include an O-ring to seal the mounting hole from moisture. Not exactly what you are looking for? Build your own cable assembly with our Custom Product Configurator. Not sure what connector your radio has. Use our Radio to Connector-Type Cross-Reference.
شماره قطعه (MPN)
Impedance
50 Ohm
Interface
SMA
مجموعه کابل سفارشی RF از روی نقشه برای تأمین تولیدی
مجموعه کابل سفارشی RF از روی نقشه برای تأمین تولیدی با بررسی سازگاری، راهنمای MOQ و پشتیبانی کاهش هزینه.
پیش از RFQ ورودیهای واضح بررسی را سریعتر میکند. ⌄
- • اگر برند یا خانواده قطعه مهم است، MPN مرجع و برند منبع را ارسال کنید.
- • برای پروژههای تولیدی، BOM و تفکیک حجم را اضافه کنید.
- • نقشه یا نیازهای کلیدی سازگاری را پیوست کنید.
تصویر
برای بزرگنمایی روی تصویر کلیک کنید.
مشخصات
| اینترفیس | Coaxial Cable Assemblies |
|---|---|
| اینترفیس | 195 Series |
| اینترفیس | SMA |
| اینترفیس | NMO Mount |
| امپدانس | 50 Ohm |
| امپدانس | 50 Ohm |
| امپدانس | 50 Ohm |
| جنسیت | Plug |
| جنسیت | Hermaphroditic |
| جهتگیری | Straight |
| جهتگیری | Right Angle |
| Connector 1 Polarity | Reverse Polarity |
نمایش 4 مشخصه بیشتر
| Connector 2 Polarity | Standard |
|---|---|
| Category | Coaxial Cable Assemblies |
| Application | Mobile Wireless Applications; Wi-Fi Radios; Wireless LAN Devices; RF Voice/Video/Data |
| Product Features | Custom cable lengths available; Each assembly is fully tested ensuring the highest quality; Made with high performance, high quality 195-series coax cable; Excellent low loss characteristics |
توضیح
داده مرجع فعلی برای CA-AM1RSPA010: SMA · 50 Ohm · Straight. کاتالوگ فعلاً این پیکربندی را نشان میدهد: Straight. امپدانس بهصورت 50 Ohm ثبت شده است. اگر حیاتی است، دوباره در RFQ تأیید کنید. اگر نصب اینجا نیست، آن را از روی نقشه یا نیاز اتصال تأیید کنید. از این صفحه برای تهیه فهرست کوتاه پیش از RFQ استفاده کنید، نه تأیید نهایی.
از این صفحه برای تهیه فهرست کوتاه پیش از RFQ استفاده کنید. مسیر تأمین و تولید سفارشی MOQ 200+ پس از بررسی نقشه/مشخصات/BOM تأیید میشود؛ موجودی آماده فرض نمیشود.
کانکتورهای مشابه
مدلهای مرتبط:
R302255000180
MML / PLUG H2.5 - SMA BULKHEAD JACK CABLE ASSEMBLY 1.37/50/S LGTH 180CM
SMA362NS-0032
SMA plug, Dia16mm 2 hole flange with round contact (Φ0.3L=1.5), PTFE L=3.2 18GHz VSWR1.2 and 27GHz VSWR1.3
SMA31SN-9223
SMA plug crimp right angle for RG223 with semi-Hex Nut; 7GHz VSWR1.2
LCCA30623-FT4
L-com SMA male to TNC female bulkhead semi-flexible cable assembly using LC085TBJ coax, 4 FT , LF solder is available for same day shipping from our facility. This high quality SMA cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30623-FT4 SMA cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF coaxial cable assemblies are built with SMA connection on one end and TNC bulkhead connection on the other. This SMA to TNC cable from L-com has a male to female gender combination. Our SMA male to TNC female coaxial assembly part number LCCA30623-FT4 can also be known as SMA plug to TNC jack cable assembly when using alternate gender names. SMA plug to TNC jack cable assembly LCCA30623-FT4 is manufactured with a formable coax. These formable SMA to TNC cable assemblies use LC085TBJ coax and are single shielded. L-com single shielded SMA male to TNC female bulkhead semi-flexible cable assembly using LC085TBJ coax, 4 FT , LF solder is built from quality components by skilled assemblers with many years of experience.Maximum frequency for these SMA to TNC M/F cables is 6 GHz. Technical performance specifications on these 6 GHz SMA male to TNC female bulkhead cables are located on the LCCA30623-FT4 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a TNC female bulkhead to SMA male cable assembly because it can be used in the opposite direction.SMA male to TNC female bulkhead semi-flexible cable assembly using LC085TBJ coax, 4 FT , LF solder is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our SMA to TNC cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our SMA male to TNC female bulkhead semi-flexible cable assembly using LC085TBJ coax, 4 FT , LF solder.
FMCA2115
RA SMA Male to SMA Female Bulkhead Cable FM-SR141TB Coax with LF Solder
LCCA30467-FT2
L-com BNC female bulkhead to SMA male cable assembly using LC141TBJ coax, 2 FT is available for same day shipping from our facility. This high quality BNC cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30467-FT2 BNC cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF coaxial cable assemblies are built with BNC bulkhead connection on one end and SMA connection on the other. This BNC to SMA cable from L-com has a female to male gender combination. Our BNC female to SMA male coaxial assembly part number LCCA30467-FT2 can also be known as BNC jack to SMA plug cable assembly when using alternate gender names. BNC jack to SMA plug cable assembly LCCA30467-FT2 is manufactured with a formable coax.Maximum frequency for these BNC to SMA F/M cables is 1 GHz. Technical performance specifications on these 1 GHz BNC femalebulkhead to SMA male cables are located on the LCCA30467-FT2 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a SMA male to BNC female bulkhead cable assembly because it can be used in the opposite direction.BNC female bulkhead to SMA male cable assembly using LC141TBJ coax, 2 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our BNC to SMA cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our BNC female bulkhead to SMA male cable assembly using LC141TBJ coax, 2 FT.
جستجوی MPN جستجوی دقیق، پیشوندی و جزئی پشتیبانی میشود. ⌄
سلب مسئولیت
نام سازندگان، علائم تجاری، نمادها و شماره قطعات فقط برای شناسایی و تطبیق مرجع استفاده میشوند. Cstone Technology شریک تأمین صادراتی مستقر در چین برای جایگزینهای سازگار است و به برندهای اصلی وابسته نیست. علائم تجاری متعلق به مالکان مربوطه هستند. مناسب بودن نهایی در مرحله RFQ با بررسی نقشه/مشخصات تأیید میشود.