جزئیات محصول
BNC Straight PCB Jack End Launch Bulkhead Rear Mount 75 Ohm
شماره قطعه (MPN)
Impedance
75
Frequency
4
مجموعه کابل سفارشی RF از روی نقشه برای تأمین تولیدی
مجموعه کابل سفارشی RF از روی نقشه برای تأمین تولیدی با بررسی سازگاری، راهنمای MOQ و پشتیبانی کاهش هزینه.
پیش از RFQ ورودیهای واضح بررسی را سریعتر میکند. ⌄
- • اگر برند یا خانواده قطعه مهم است، MPN مرجع و برند منبع را ارسال کنید.
- • برای پروژههای تولیدی، BOM و تفکیک حجم را اضافه کنید.
- • نقشه یا نیازهای کلیدی سازگاری را پیوست کنید.
تصویر
برای بزرگنمایی روی تصویر کلیک کنید.
مشخصات
| اینترفیس | Not Applicable |
|---|---|
| امپدانس | 75 |
| فرکانس (حداکثر) | 4 |
| جنسیت | Jack |
| جهتگیری | Straight |
| ترمینیشن | Solder |
| ترمینیشن | PCB - End Launch |
| نصب | Bulkhead - Rear Mount |
| Body Material | Brass |
| ترمینیشن | Phosphor Bronze |
| Body Finish | Gold |
| ترمینیشن | Gold |
نمایش 13 مشخصه بیشتر
| مکانیزم کوپلینگ | Bayonet |
|---|---|
| Export Control Classification Number | EAR99 |
| درجه IP | Not Rated |
| Insulator Material | PTFE |
| Isolated | No |
| Low PIM | No |
| Mil Qualified | Not Mil Qualified |
| Non Magnetic | No |
| PCB Thickness (Max) | 0.084 Inches (2.13 mm) |
| Ports | 1 (Single Port) |
| Size Category | Miniature |
| Temp (Max Degrees Celsius) | 85 |
| Temp (Min Degrees Celsius) | -40 |
توضیح
داده مرجع فعلی برای 112740-16: 75 · 4 · Bulkhead - Rear Mount. کاتالوگ فعلاً این پیکربندی را نشان میدهد: Straight · Solder. امپدانس بهصورت 75 ثبت شده است. اگر حیاتی است، دوباره در RFQ تأیید کنید. فرکانس بهصورت 4 ثبت شده است. حد واقعی هنوز به مجموعه، جفت اتصال و کاربرد وابسته است. نصب بهصورت Bulkhead - Rear Mount ثبت شده است. اگر محدودیت پنل، عبور از بدنه یا فلنج مهم است، ابعاد را با RFQ ارسال کنید. جنس بهصورت Brass ثبت شده است. برای بررسی مفید است، اما جایگزین تأیید کامل چیدمان پروژه نیست. کاتالوگ مقدار آببندی یا حفاظت را نیز Not Rated نشان میدهد. آن را با شرایط واقعی محیط در RFQ مقایسه کنید. از این صفحه برای تهیه فهرست کوتاه پیش از RFQ استفاده کنید، نه تأیید نهایی.
از این صفحه برای تهیه فهرست کوتاه پیش از RFQ استفاده کنید. مسیر تأمین و تولید سفارشی MOQ 200+ پس از بررسی نقشه/مشخصات/BOM تأیید میشود؛ موجودی آماده فرض نمیشود.
کانکتورهای مشابه
مدلهای مرتبط:
115101-20-06.00
RF Cable Assemblies BNC St Plug-BNC St Plug RG-59 6 in
095-850-192-060
RF Cable Assemblies BNC Str Jck - HD-BNC Str Plg 4794R 60inch
CC174-12
These versatile 50 Ohm BNC plug coaxial cable assemblies feature fully molded strain reliefs and nickel plated bodies for a cable assembly that can withstand harsh conditions. Gold plated center contacts help minimize attenuation and provide corrosion resistance. These cable assemblies are stocked in 12 standard lengths from 1 to 25 feet to satisfy your immediate needs.
LCCA30678-FT1.5
L-com N male to BNC female bulkhead cable assembly using RG58 coax, 1.5 FT is available for same day shipping from our facility. This high quality N cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30678-FT1.5 N cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF coaxial cable assemblies are built with N connection on one end and BNC bulkhead connection on the other. This N to BNC cable from L-com has a male to female gender combination. Our N male to BNC female coaxial assembly part number LCCA30678-FT1.5 can also be known as N plug to BNC jack cable assembly when using alternate gender names. N plug to BNC jack cable assembly LCCA30678-FT1.5 is manufactured with a flexible coax. These flexible N to BNC cable assemblies use RG58 coax and are single shielded. L-com single shielded N male to BNC female bulkhead cable assembly using RG58 coax, 1.5 FT is built from quality components by skilled assemblers with many years of experience.Maximum frequency for these N to BNC M/F cables is 1 GHz. Technical performance specifications on these 1 GHz N male to BNC female bulkhead cables are located on the LCCA30678-FT1.5 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a BNC female bulkhead to N male cable assembly because it can be used in the opposite direction.N male to BNC female bulkhead cable assembly using RG58 coax, 1.5 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our N to BNC cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our N male to BNC female bulkhead cable assembly using RG58 coax, 1.5 FT.
LCCA30569-FT2
L-com BNC female to N male cable assembly using LC085TB coax, 2 FT is available for same day shipping from our facility. This high quality BNC cable is part of a large selection of in-stock, commercial-off-the-shelf and custom-built coaxial cable assemblies for RF / microwave that all ship the same business day as they are ordered. LCCA30569-FT2 BNC cables from L-com are a great choice for solutions requiring high quality and rapid shipping. These high-quality RF coax cable assemblies can be used for telecom, military / defense, laboratory test & measurement, industrial / commercial and many other applications. Our expert technical support and knowledgeable sales teams are ready to help answer your RF coaxial cable assembly questions.These RF coaxial cable assemblies are built with BNC connection on one end and N connection on the other. This BNC to N cable from L-com has a female to male gender combination. Our BNC female to N male coaxial assembly part number LCCA30569-FT2 can also be known as BNC jack to N plug cable assembly when using alternate gender names. BNC jack to N plug cable assembly LCCA30569-FT2 is manufactured with a formable coax. These formable BNC to N cable assemblies use LC085TB coax and are single shielded. L-com single shielded BNC female to N male cable assembly using LC085TB coax, 2 FT is built from quality components by skilled assemblers with many years of experience.Maximum frequency for these BNC to N F/M cables is 1 GHz. Technical performance specifications on these 1 GHz BNC female to N male cables are located on the LCCA30569-FT2 datasheet PDF along with CAD drawing and dimensions. The L-Com RF cable assembly data sheet with specs, drawing dimensions can be found on this product page just above. Our Custom Cable Configurator is where to find and build customized versions of this RF coaxial assembly or many other connectors and coax combinations that all ship the same-day. This product can also be called a N male to BNC female cable assembly because it can be used in the opposite direction.BNC female to N male cable assembly using LC085TB coax, 2 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf and custom versions of our BNC to N cable assembly available for same-day shipping, but we also have thousands of other products that have same day shipping. Because of all these reasons and more, L-com should be your number one source for wired and wireless connectivity products like our BNC female to N male cable assembly using LC085TB coax, 2 FT.
UPLR220-020
RF Connectors / Coaxial Connectors BNC Plug 75 Ohm Full CRMP R/A
جستجوی MPN جستجوی دقیق، پیشوندی و جزئی پشتیبانی میشود. ⌄
سلب مسئولیت
Cstone یک کارخانه تخصصی، نه شرکت بازرگانی، برای کانکتورهای RF و کواکسیال، آداپتورها و مجموعههای کابل از جمله N-type، BNC، SMA، SMP، SSMB و MMCX است. کانکتورها را بر اساس نقشههای 2D یا نمونه تولید میکنیم و سازگاری، MOQ، زمان تحویل و جزئیات تولید از طریق RFQ تأیید میشود. Cstone Technology با برندهای اصلی وابستگی ندارد. نام سازندگان، علائم تجاری، نمادها و شماره قطعات فقط برای شناسایی و تطبیق مرجع استفاده میشوند. علائم تجاری متعلق به مالکان مربوطه هستند. مناسب بودن نهایی در مرحله RFQ با بررسی نقشه/مشخصات تأیید میشود.