Detalles del producto
TNC conector; configuration: jack recto; impedance 50 Ω; montaje Free Hanging (In-Line); cable RG-59
Número de parte (MPN)
Interfaz
TNC
cable RF a medida desde plano para sourcing de producción
cable RF a medida desde plano orientado a producción con revisión de compatibilidad, guía de MOQ y soporte de reducción de coste.
Qué preparar antes del RFQ Los datos claros reducen las conjeturas y aceleran una respuesta útil. ⌄
- • Comparta el MPN de referencia, la pieza de acoplamiento o la marca de origen si es relevante para la revisión.
- • Agregue el BOM, la división de cantidad y la demanda anual si el proyecto supera el volumen de prototipo.
- • Adjunte el plano, la hoja de datos o los requisitos críticos de impedancia, frecuencia, montaje y recubrimiento.
Imagen
Haga clic para ampliar.
Specifications
| Interfaz | TNC |
|---|---|
| Montaje | Free Hanging (In-Line) |
| Grado IP | estándar |
| Género | jack |
| Orientación | recto |
| Material del cuerpo | latón |
| Acabado del cuerpo | níquel |
| Impedancia | 50 Ω |
| Grado IP | RG-59 |
| Operating Temperature | -55°C~85°C |
| Signal Performance | 0.20dB |
Descripción
Los datos de referencia para VT30-2031 incluyen actualmente: TNC · Free Hanging (In-Line). El montaje se indica como Free Hanging (In-Line). Si importan restricciones de panel, bulkhead o brida, envíe las dimensiones con el RFQ. El material se indica como latón. Es útil para revisión, pero no sustituye la confirmación completa del proyecto. Esta página es para revisión y preselección. La confirmación final de ajuste, MOQ y plazo viene tras la revisión del plano, especificación o BOM.
Use esta página para filtrar antes del RFQ. La ruta de suministro y la producción personalizada MOQ 200+ se confirman tras revisar plano/especificación/BOM.
Conectores similares
También podrían interesarle estos modelos:
LCCA30254-FT2
L-com's LCCA30254-FT2 is a low loss TNC macho a polaridad inversa TNC hembra ensamblaje de cable using LMR-200-FR coax 2 FT con Times Microwave components y ships same-day. The LMR-200-FR coax of this TNC cable uses the PE dielectric con a VoP of 83% resulting in very low insertion loss compared a solid dielectrics. These flexible RF ensamblaje de cable are ideal para applications where flexure is required. Our L-com TNC a TNC ensamblaje de cable has a macho a hembra género configuration con flexible LMR-200-FR serie coax y operates a 3 GHz. The double blindaje of this TNC cable is layered by tinned cobre braid over aluminio tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this TNC macho a TNC hembra cable along con the rest of L-com's other RF ensamblajes can also be built y shipped same day. Other available RF ensamblaje de cable value added services from L-com include conector orientation or clocking heat shrink booting y custom labeling. RF testing can also be performed a document the electrical performance of your ensamblaje de cable. contacto a sales representative para testing or custom RF cable quotes. Part number LCCA30254-FT2 L-com Low Loss TNC macho a polaridad inversa TNC hembra ensamblaje de cable using LMR-200-FR Coax 2 FT con Times Microwave Components data sheet PDF includes details of the RF product specifications CAD drawing(s) y dimensions below.
22640551
TNC connectors are threaded RF connectors applicable from DC up to 11 GHz. 50 ohm TNC and 75 ohm TNC connectors are intermateable without restrictions.
LCCA30583-FT1.5
L-com N macho en ángulo recto a TNC hembra bulkhead ensamblaje de cable using LC085TB coax 1.5 FT is available para same day shipping from our facility. This alta quality N cable is part of a large selection of in-stock commercial-off-the-shelf y custom-built coaxial ensamblaje de cable para RF / microwave that all ship the same business day as they are ordered. LCCA30583-FT1.5 N cables from L-com are a great choice para solutions requiring alta quality y rapid shipping. These alta-quality RF coax ensamblaje de cable can be used para telecom military / defense laboratory test y measurement industrial / commercial y many other applications. Our expert technical support y knowledgeable sales teams are ready a help answer your RF coaxial ensamblaje de cable questions.These RF coaxial ensamblaje de cable are built con en ángulo recto N connection on one end y TNC bulkhead connection on the other. This en ángulo recto N a TNC cable from L-com has a macho a hembra género combination. Our N macho a TNC hembra coaxial ensamblaje part number LCCA30583-FT1.5 can also be known as en ángulo recto N enchufe a TNC jack ensamblaje de cable when using alternate género names. N enchufe a TNC jack ensamblaje de cable LCCA30583-FT1.5 is manufactured con a formable coax. These formable N a TNC ensamblaje de cable use LC085TB coax y are single blindado. L-com single blindado N macho en ángulo recto a TNC hembra bulkhead ensamblaje de cable using LC085TB coax 1.5 FT is built from quality components by skilled assemblers con many years of experience.Maximum frequency para these N a TNC M/F cables is 6 GHz. Technical performance specifications on these 6 GHz N en ángulo recto macho a TNC hembra bulkhead cables are located on the LCCA30583-FT1.5 datasheet PDF along con CAD drawing y dimensions. The L-Com RF ensamblaje de cable data sheet con specs drawing dimensions can be found on this product page just above. Our Custom cable Configurator is where a find y build customized versions of this RF coaxial ensamblaje or many other conectores y coax combinations that all ship the same-day. This product can also be called a TNC hembra bulkhead a en ángulo recto N macho ensamblaje de cable because it can be used in the opposite direction.N macho en ángulo recto a TNC hembra bulkhead ensamblaje de cable using LC085TB coax 1.5 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf y custom versions of our en ángulo recto N a TNC ensamblaje de cable available para same-day shipping but we also have thousands of other products that have same day shipping. Because of all these reasons y more L-com should be your number one source para wired y wireless connectivity products like our N macho en ángulo recto a TNC hembra bulkhead ensamblaje de cable using LC085TB coax 1.5 FT.
LCCA30585-FT10
L-com N hembra a TNC macho en ángulo recto ensamblaje de cable using LC085TB coax 10 FT is available para same day shipping from our facility. This alta quality N cable is part of a large selection of in-stock commercial-off-the-shelf y custom-built coaxial ensamblaje de cable para RF / microwave that all ship the same business day as they are ordered. LCCA30585-FT10 N cables from L-com are a great choice para solutions requiring alta quality y rapid shipping. These alta-quality RF coax ensamblaje de cable can be used para telecom military / defense laboratory test y measurement industrial / commercial y many other applications. Our expert technical support y knowledgeable sales teams are ready a help answer your RF coaxial ensamblaje de cable questions.These RF coaxial ensamblaje de cable are built con N connection on one end y en ángulo recto TNC connection on the other. This N a en ángulo recto TNC cable from L-com has a hembra a macho género combination. Our N hembra a TNC macho coaxial ensamblaje part number LCCA30585-FT10 can also be known as N jack a en ángulo recto TNC enchufe ensamblaje de cable when using alternate género names. N jack a TNC enchufe ensamblaje de cable LCCA30585-FT10 is manufactured con a formable coax. These formable N a TNC ensamblaje de cable use LC085TB coax y are single blindado. L-com single blindado N hembra a TNC macho en ángulo recto ensamblaje de cable using LC085TB coax 10 FT is built from quality components by skilled assemblers con many years of experience.Maximum frequency para these N a TNC F/M cables is 6 GHz. Technical performance specifications on these 6 GHz N hembra a TNC en ángulo recto macho cables are located on the LCCA30585-FT10 datasheet PDF along con CAD drawing y dimensions. The L-Com RF ensamblaje de cable data sheet con specs drawing dimensions can be found on this product page just above. Our Custom cable Configurator is where a find y build customized versions of this RF coaxial ensamblaje or many other conectores y coax combinations that all ship the same-day. This product can also be called a en ángulo recto TNC macho a N hembra ensamblaje de cable because it can be used in the opposite direction.N hembra a TNC macho en ángulo recto ensamblaje de cable using LC085TB coax 10 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf y custom versions of our N a en ángulo recto TNC ensamblaje de cable available para same-day shipping but we also have thousands of other products that have same day shipping. Because of all these reasons y more L-com should be your number one source para wired y wireless connectivity products like our N hembra a TNC macho en ángulo recto ensamblaje de cable using LC085TB coax 10 FT.
SD8264
50 ohm TNC plug to TNC jack DC Block inner from 50MHz to 18GHz rated 200 Volt in Stainless Steel
LCCA30511-FT3
L-com N macho a TNC macho en ángulo recto ensamblaje de cable using LC141TBJ coax 3 FT is available para same day shipping from our facility. This alta quality N cable is part of a large selection of in-stock commercial-off-the-shelf y custom-built coaxial ensamblaje de cable para RF / microwave that all ship the same business day as they are ordered. LCCA30511-FT3 N cables from L-com are a great choice para solutions requiring alta quality y rapid shipping. These alta-quality RF coax ensamblaje de cable can be used para telecom military / defense laboratory test y measurement industrial / commercial y many other applications. Our expert technical support y knowledgeable sales teams are ready a help answer your RF coaxial ensamblaje de cable questions.These RF coaxial ensamblaje de cable are built con N connection on one end y en ángulo recto TNC connection on the other. This N a en ángulo recto TNC cable from L-com has a macho a macho género combination. Our N macho a TNC macho coaxial ensamblaje part number LCCA30511-FT3 can also be known as N enchufe a en ángulo recto TNC enchufe ensamblaje de cable when using alternate género names. N enchufe a TNC enchufe ensamblaje de cable LCCA30511-FT3 is manufactured con a formable coax. These formable N a TNC ensamblaje de cable use LC141TBJ coax y are single blindado. L-com single blindado N macho a TNC macho en ángulo recto ensamblaje de cable using LC141TBJ coax 3 FT is built from quality components by skilled assemblers con many years of experience.Maximum frequency para these N a TNC M/M cables is 6 GHz. Technical performance specifications on these 6 GHz N macho a TNC en ángulo recto macho cables are located on the LCCA30511-FT3 datasheet PDF along con CAD drawing y dimensions. The L-Com RF ensamblaje de cable data sheet con specs drawing dimensions can be found on this product page just above. Our Custom cable Configurator is where a find y build customized versions of this RF coaxial ensamblaje or many other conectores y coax combinations that all ship the same-day. This product can also be called a en ángulo recto TNC macho a N macho ensamblaje de cable because it can be used in the opposite direction.N macho a TNC macho en ángulo recto ensamblaje de cable using LC141TBJ coax 3 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf y custom versions of our N a en ángulo recto TNC ensamblaje de cable available para same-day shipping but we also have thousands of other products that have same day shipping. Because of all these reasons y more L-com should be your number one source para wired y wireless connectivity products like our N macho a TNC macho en ángulo recto ensamblaje de cable using LC141TBJ coax 3 FT.
Búsqueda por MPN Admite coincidencia exacta, por prefijo y parcial. ⌄
Aviso legal
Cstone es una fábrica profesional, no una empresa comercial, especializada en conectores RF y coaxiales, adaptadores y conjuntos de cable, incluidos N-type, BNC, SMA, SMP, SSMB y MMCX. Fabricamos conectores según planos 2D o muestras; el ajuste, MOQ, plazo y detalles de producción se confirman por RFQ. Cstone Technology no está afiliada a las marcas originales. Los nombres de fabricantes, marcas registradas, símbolos y números de pieza se utilizan solo con fines de identificación y referencia cruzada. Las marcas registradas son propiedad de sus respectivos dueños. La idoneidad final se confirma mediante revisión de plano/especificación durante el RFQ.