Detalles del producto
SMA hembra Bulkhead montaje Commercial Grade conector soldadura Attachment .068 inch End Launch PCB
Número de parte (MPN)
Interfaz
SMA
cable RF a medida desde plano para sourcing de producción
cable RF a medida desde plano orientado a producción con revisión de compatibilidad, guía de MOQ y soporte de reducción de coste.
Qué preparar antes del RFQ Los datos claros reducen las conjeturas y aceleran una respuesta útil. ⌄
- • Comparta el MPN de referencia, la pieza de acoplamiento o la marca de origen si es relevante para la revisión.
- • Agregue el BOM, la división de cantidad y la demanda anual si el proyecto supera el volumen de prototipo.
- • Adjunte el plano, la hoja de datos o los requisitos críticos de impedancia, frecuencia, montaje y recubrimiento.
Imagen
Haga clic para ampliar.
Specifications
| Interfaz | .068 inch End Launch |
|---|---|
| Interfaz | SMA |
| Género | hembra |
| Polaridad | estándar |
| Impedancia | 50 Ω |
| Estilo de cuerpo | recto |
| Attachment Method | soldadura |
| Montaje | Bulkhead |
| Frecuencia mínima | DC |
| Frecuencia máxima | 18 GHz |
| Grado IP | conectores |
| Category | conectores |
Show 1 more specs
| Orientación | recto |
|---|
Descripción
Los datos de referencia para PE51714 incluyen actualmente: SMA · Bulkhead. El montaje se indica como Bulkhead. Si importan restricciones de panel, bulkhead o brida, envíe las dimensiones con el RFQ. Esta página es para revisión y preselección. La confirmación final de ajuste, MOQ y plazo viene tras la revisión del plano, especificación o BOM.
Use esta página para filtrar antes del RFQ. La ruta de suministro y la producción personalizada MOQ 200+ se confirman tras revisar plano/especificación/BOM.
Conectores similares
También podrían interesarle estos modelos:
Telegartner: R-SMA Surge Suppressor
Telegartner: R-SMA Surge Suppressor m-f con gas discharge frequency range up a 6 GHz bulkhead tipo Z03 150-250V DC oro (packed per 1)
LCCA30015-FT4
L-com low loss SMA macho a TNC hembra bulkhead ensamblaje de cable con heavy duty heat shrink boot using LL142 coax 4 FT is available para same day shipping from our facility. This alta quality SMA cable is part of a large selection of in-stock commercial-off-the-shelf y custom-built coaxial ensamblaje de cable para RF / microwave that all ship the same business day as they are ordered. LCCA30015-FT4 SMA cables from L-com are a great choice para solutions requiring alta quality y rapid shipping. These alta-quality RF coax ensamblaje de cable can be used para telecom military / defense laboratory test y measurement industrial / commercial y many other applications. Our expert technical support y knowledgeable sales teams are ready a help answer your RF coaxial ensamblaje de cable questions.These RF low loss coaxial ensamblaje de cable are built con SMA connection on one end y TNC bulkhead connection on the other. This low loss SMA a TNC cable from L-com has a macho a hembra género combination. Our SMA macho a TNC hembra coaxial ensamblaje part number LCCA30015-FT4 can also be known as low loss SMA enchufe a TNC jack ensamblaje de cable when using alternate género names. SMA enchufe a TNC jack ensamblaje de cable LCCA30015-FT4 is manufactured con a flexible coax. These flexible SMA a TNC ensamblaje de cable use LL142 coax y are triple blindado. L-com triple blindado low loss SMA macho a TNC hembra bulkhead ensamblaje de cable con heavy duty heat shrink boot using LL142 coax 4 FT is built from quality components by skilled assemblers con many years of experience.Maximum frequency para these SMA a TNC M/F cables is 18 GHz. Technical performance specifications on these 18 GHz SMA macho a TNC hembra bulkhead cables are located on the LCCA30015-FT4 datasheet PDF along con CAD drawing y dimensions. The L-Com RF ensamblaje de cable data sheet con specs drawing dimensions can be found on this product page just above. Our Custom cable Configurator is where a find y build customized versions of this RF coaxial ensamblaje or many other conectores y coax combinations that all ship the same-day. This product can also be called a low loss TNC hembra bulkhead a SMA macho ensamblaje de cable because it can be used in the opposite direction.Low loss SMA macho a TNC hembra bulkhead ensamblaje de cable con heavy duty heat shrink boot using LL142 coax 4 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf y custom versions of our SMA a TNC ensamblaje de cable available para same-day shipping but we also have thousands of other products that have same day shipping. Because of all these reasons y more L-com should be your number one source para wired y wireless connectivity products like our low loss SMA macho a TNC hembra bulkhead ensamblaje de cable con heavy duty heat shrink boot using LL142 coax 4 FT.
0SR01R01072.0
RF ensamblaje de cable 18 GHz 72"L Mini-CP EndA SMA EndB SMA
LCCA30354-FT1.5
L-com SMA macho a SMA macho ensamblaje de cable using RG223 coax 1.5 FT is available para same day shipping from our facility. This alta quality SMA cable is part of a large selection of in-stock commercial-off-the-shelf y custom-built coaxial ensamblaje de cable para RF / microwave that all ship the same business day as they are ordered. LCCA30354-FT1.5 SMA cables from L-com are a great choice para solutions requiring alta quality y rapid shipping. These alta-quality RF coax ensamblaje de cable can be used para telecom military / defense laboratory test y measurement industrial / commercial y many other applications. Our expert technical support y knowledgeable sales teams are ready a help answer your RF coaxial ensamblaje de cable questions.These RF coaxial ensamblaje de cable are built con SMA connection on one end y SMA connection on the other. This SMA a SMA cable from L-com has a macho a macho género combination. Our SMA macho a SMA macho coaxial ensamblaje part number LCCA30354-FT1.5 can also be known as SMA enchufe a SMA enchufe ensamblaje de cable when using alternate género names. SMA enchufe a SMA enchufe ensamblaje de cable LCCA30354-FT1.5 is manufactured con a flexible coax. These flexible SMA a SMA ensamblaje de cable use RG223 coax y are double blindado. L-com double blindado SMA macho a SMA macho ensamblaje de cable using RG223 coax 1.5 FT is built from quality components by skilled assemblers con many years of experience.Maximum frequency para these SMA a SMA M/M cables is 12.4 GHz. Technical performance specifications on these 12.4 GHz SMA macho a SMA macho cables are located on the LCCA30354-FT1.5 datasheet PDF along con CAD drawing y dimensions. The L-Com RF ensamblaje de cable data sheet con specs drawing dimensions can be found on this product page just above. Our Custom cable Configurator is where a find y build customized versions of this RF coaxial ensamblaje or many other conectores y coax combinations that all ship the same-day.SMA macho a SMA macho ensamblaje de cable using RG223 coax 1.5 FT is just one of a large selection of in-stock RF products available. L-com not only has this off-the-shelf y custom versions of our SMA a SMA ensamblaje de cable available para same-day shipping but we also have thousands of other products that have same day shipping. Because of all these reasons y more L-com should be your number one source para wired y wireless connectivity products like our SMA macho a SMA macho ensamblaje de cable using RG223 coax 1.5 FT.
RFSMAEP
Our SMA conector range are semi-precision y offer a 50 Ω impedance y a 0.25 - 36 threaded coupling. Offering alta performance all within a compact SMA (Sub Miniature version A) conector design frequently used as estándar para antennas devices y various medical applications.
A80D80-316-
SMA jack a MCX jack using RG316
Búsqueda por MPN Admite coincidencia exacta, por prefijo y parcial. ⌄
Aviso legal
Cstone es una fábrica profesional, no una empresa comercial, especializada en conectores RF y coaxiales, adaptadores y conjuntos de cable, incluidos N-type, BNC, SMA, SMP, SSMB y MMCX. Fabricamos conectores según planos 2D o muestras; el ajuste, MOQ, plazo y detalles de producción se confirman por RFQ. Cstone Technology no está afiliada a las marcas originales. Los nombres de fabricantes, marcas registradas, símbolos y números de pieza se utilizan solo con fines de identificación y referencia cruzada. Las marcas registradas son propiedad de sus respectivos dueños. La idoneidad final se confirma mediante revisión de plano/especificación durante el RFQ.