Detalles del producto
Plenum N Male to 7/16 DIN Male Right Angle Low PIM Cable Using SPP-250-LLPL Coax , LF Solder
Número de parte (MPN)
Impedancia
50 Ohm
Interfaz
N
cable RF a medida desde plano para sourcing de producción
cable RF a medida desde plano orientado a producción con revisión de compatibilidad, guía de MOQ y soporte de reducción de coste.
Qué preparar antes del RFQ Los datos claros reducen las conjeturas y aceleran una respuesta útil. ⌄
- • Comparta el MPN de referencia, la pieza de acoplamiento o la marca de origen si es relevante para la revisión.
- • Agregue el BOM, la división de cantidad y la demanda anual si el proyecto supera el volumen de prototipo.
- • Adjunte el plano, la hoja de datos o los requisitos críticos de impedancia, frecuencia, montaje y recubrimiento.
Imagen
Haga clic para ampliar.
Specifications
| Interfaz | Cable Assemblies |
|---|---|
| Interfaz | SPP-250-LLPL |
| Interfaz | N |
| Interfaz | 7/16 DIN |
| Impedancia | 50 Ohm |
| Impedancia | 50 Ohm |
| Impedancia | 50 Ohm |
| Género | Male |
| Género | Male |
| Orientación | Straight |
| Orientación | Right Angle |
| Connector Polarity 1 | Standard |
Show 5 more specs
| Montaje | None |
|---|---|
| Connector Polarity 2 | Standard |
| Montaje | None |
| Tipo de cable | SPP-250-LLPL |
| Category | Cable Assemblies |
Descripción
Los datos de referencia para PE3C4136 incluyen actualmente: N · 50 Ohm · Straight. El catálogo muestra actualmente la configuración como: Straight. La impedancia se indica como 50 Ohm. Si es un parámetro crítico, confírmelo en el RFQ. Si faltan datos de montaje en el catálogo, confíe en el plano o requisito de acoplamiento. Esta página es para revisión y preselección. La confirmación final de ajuste, MOQ y plazo viene tras la revisión del plano, especificación o BOM.
Use esta página para filtrar antes del RFQ. La ruta de suministro y la producción personalizada MOQ 200+ se confirman tras revisar plano/especificación/BOM.
Conectores similares
También podrían interesarle estos modelos:
T3475-013
Circular DIN conectores macho cable conector 7 WAY
L717DEG09P1APNRM6
conectores D-Sub estándar Dsub Machined signal 7.5A en ángulo recto PCB montaje pasante FP=10.3 mm Cnt Row Spacing 2.54 mm Cnt Tail 0.6 mm 09 pin Bright estaño Shell+Grounding Dimples Flash oro M3 Threaded Rear Insert Plastic R/A Bracket con Boardlock
LCCA30213-FT1
L-com's LCCA30213-FT1 is a low loss N male to N male right angle cable assembly using LMR-600 coax, 1 FT with Times Microwave components and ships same-day. The LMR-600 coax of this N cable uses the PE (F) dielectric with a VoP of 87%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com N to N cable assembly has a male to male gender configuration with flexible LMR-600 series coax and operates to 5.8 GHz. The double shield of this N cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. This right angle N cable interface on the LMR-600 coax allows for easier connections in tight spaces. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N male to N male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30213-FT1 L-com Low Loss N Male to N Male Right Angle Cable Assembly using LMR-600 Coax, 1 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
CA-DMDMH002
High quality fully tested 7/16 DIN Male to 7/16 DIN Male cable assemblies featuring high performance 400-Series Ultra Flex coax cable. These cables are ideal for indoor or outdoor applications that require maximum flexibility due to curves, bends and twists. In addition these cables have excellent low loss characteristics.
CADIN1IG
conectores modulares / conectores Ethernet DIN rail montaje adaptador con label
LC3MSA00477-36
The L-com LC3MSA00477-36 MIL-STD-1553 flexible RF cable assembly is perfect for applications that need tight bends and flexible cable. This TRB 3-slot to TRB 3-lug cable assembly is plug to jack and made of 78 ohm flexible 30-02003-LC twinax. Our 78 Ohm cable assembly is available with a PVC jacket and a copper inner conductor with silver plating. We offer a blue, 0.57-inch OD TRB 3-slot to TRB 3-lug cable that operates at 500 MHz.This blue RF cable assembly is the most commonly utilized cable assembly in wide connectivity applications such as bus couplers, avionics control boxes, and bus relay. L-com's LC3MSA00477-36 MIL-STD-1553 flexible RF cable assembly is available with PE dielectric. Our TRB 3-slot plug to TRB 3-lug jack cable has bayonet coupling connectors made of brass with nickel plating. This RF flexible 30-02003-LC twinax cable operates between -20 and 75 degrees Celsius.L-com has one of the largest in-stock selections of MIL-STD-1553 flexible RF cable assembly with same-day shipment for domestic and international orders. We are a global leader of wired and wireless connectivity products, offering a wide range of solutions across many key industries, including electronics, medical, industrial automation, military, and telecommunication. For further information on similar products, our expert technical support and trained sales team can get you the perfect TRB 3-slot plug to TRB 3-lug jack cable as per your requirements.
Búsqueda por MPN Admite coincidencia exacta, por prefijo y parcial. ⌄
Aviso legal
Los nombres de fabricantes, marcas registradas, símbolos y números de pieza se utilizan solo con fines de identificación y referencia cruzada. Cstone Technology es un socio de abastecimiento de exportación con sede en China para alternativas compatibles y no está afiliada a las marcas originales. Las marcas registradas son propiedad de sus respectivos dueños. La idoneidad final se confirma mediante revisión de plano/especificación durante el RFQ.