Detalles del producto
The NP-SMAP-18G is an In/Between Series Adaptors . This connector is suitable for various high-frequency applications. It features a impedance 50Ω, operates up to 18.0 GHz, and has a rated voltage of AC 500V, ensures a high insulation resistance (5000MΩ(Min.) at DC 500V), a low contact resistance (3 mΩ(Max.), and an excellent V.S.W.R 1.15(Max.) at DC~9 GHz, 1.2(Max.) at 9~15 GHz, 1.3(Max.) at 15~18 GHz. Withstanding temperatures from -40 to +85°C. The contact is made of Brass/Gold Plating, while the body is Brass/Nickel Plating. We can customize our products for you. We offer total customization, including changes to a product's shape, length, material, surface treatment, and packaging. Available from 1 piece for in-stock items.
Número de parte (MPN)
cable RF a medida desde plano para sourcing de producción
cable RF a medida desde plano orientado a producción con revisión de compatibilidad, guía de MOQ y soporte de reducción de coste.
Qué preparar antes del RFQ Los datos claros reducen las conjeturas y aceleran una respuesta útil. ⌄
- • Comparta el MPN de referencia, la pieza de acoplamiento o la marca de origen si es relevante para la revisión.
- • Agregue el BOM, la división de cantidad y la demanda anual si el proyecto supera el volumen de prototipo.
- • Adjunte el plano, la hoja de datos o los requisitos críticos de impedancia, frecuencia, montaje y recubrimiento.
Imagen
Haga clic para ampliar.
Specifications
| Interfaz | Between Series Adaptors Adaptor |
|---|---|
| Grado IP | {'text': "The NP-SMAP-18G is an In/Between Series Adaptors . This connector is suitable for various high-frequency applications. It features a impedance 50Ω, operates up to 18.0 GHz, and has a rated voltage of AC 500V, ensures a high insulation resistance (5000MΩ(Min.) at DC 500V), a low contact resistance (3 mΩ(Max.), and an excellent V.S.W.R 1.15(Max.) at DC~9 GHz, 1.2(Max.) at 9~15 GHz, 1.3(Max.) at 15~18 GHz. Withstanding temperatures from -40 to +85°C. The contact is made of Brass/Gold Plating, while the body is Brass/Nickel Plating. We can customize our products for you. We offer total customization, including changes to a product's shape, length, material, surface treatment, and packaging. Available from 1 piece for in-stock items."} |
| Specifications | {'Connector Gender': 'Plug-Plug', 'Impedance (Ohms)': '50Ω', 'Rated Voltage AC': 'AC 500V', 'Operating Frequency Range': '18.0 GHz', 'Insulation Resistance': '5000MΩ(Min.) at DC 500V', 'Withstand Voltage': 'AC 1000V(1 minute)', 'Contact Resistance': '3 mΩ(Max.)', 'V.S.W.R': '1.15(Max.) at DC~9 GHz, 1.2(Max.) at 9~15 GHz, 1.3(Max.) at 15~18 GHz', 'Operating Temperature Range': '-40 to +85°C'} |
| Material/Plating/Attachment | {'Contact': 'Brass/Gold Plating', 'Body': 'Brass/Nickel Plating'} |
| Category | Between Series Adaptors Adaptor |
| Product Features | 50Ω; Adaptor; Products in stock; RoHS2 |
Descripción
Hay un MPN de referencia para NP-SMAP-18G; la confirmación final depende del plano, especificación o BOM. Si faltan datos de montaje en el catálogo, confíe en el plano o requisito de acoplamiento. El material se indica como {'Contact': 'Brass/Gold Plating', 'Body': 'Brass/Nickel Plating'}. Es útil para revisión, pero no sustituye la confirmación completa del proyecto. Esta página es para revisión y preselección. La confirmación final de ajuste, MOQ y plazo viene tras la revisión del plano, especificación o BOM.
Use esta página para filtrar antes del RFQ. La ruta de suministro y la producción personalizada MOQ 200+ se confirman tras revisar plano/especificación/BOM.
Conectores similares
También podrían interesarle estos modelos:
PE3W07712
SMA Male to MCX Plug Right Angle Cable Using RG174 Coax
ADS-A3B3
SMA enchufe a BNC enchufe 4 GHz VSWR1.2
LCCA30277-FT5
L-com's LCCA30277-FT5 is a low loss SMA male to TNC male right angle cable assembly using LMR-240-DB coax, 5 FT with Times Microwave components and ships same-day. The LMR-240-DB coax of this SMA cable uses the PE (F) dielectric with a VoP of 84%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com SMA to TNC cable assembly has a male to male gender configuration with flexible LMR-240-DB series coax and operates to 5.8 GHz. The double shield of this SMA cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. This right angle TNC cable interface on the LMR-240-DB coax allows for easier connections in tight spaces. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this SMA male to SMA male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30277-FT5 L-com Low Loss SMA Male to TNC Male Right Angle Cable Assembly using LMR-240-DB Coax, 5 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
9501-9593-010
SMA / recto enchufe macho soldadura abrazadera para .085''/50 SR PASSIVATED CAPTIVE contacto
A80T80-L400-
SMA jack a TNC jack using JBY400
FMCN5454
RA SMA Female Bulkhead Connector Crimp/Solder Attachment for LMR-100A-PVC, RG174, RG316, RG188 Cable
Búsqueda por MPN Admite coincidencia exacta, por prefijo y parcial. ⌄
Aviso legal
Cstone es una fábrica profesional, no una empresa comercial, especializada en conectores RF y coaxiales, adaptadores y conjuntos de cable, incluidos N-type, BNC, SMA, SMP, SSMB y MMCX. Fabricamos conectores según planos 2D o muestras; el ajuste, MOQ, plazo y detalles de producción se confirman por RFQ. Cstone Technology no está afiliada a las marcas originales. Los nombres de fabricantes, marcas registradas, símbolos y números de pieza se utilizan solo con fines de identificación y referencia cruzada. Las marcas registradas son propiedad de sus respectivos dueños. La idoneidad final se confirma mediante revisión de plano/especificación durante el RFQ.