Detalles del producto
L-com's LCCA30237-FT10 is a low loss SMA male to BNC male cable assembly using LMR-200 coax, 10 FT with Times Microwave components and ships same-day. The LMR-200 coax of this SMA cable uses the PE (F) dielectric with a VoP of 83%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com SMA to BNC cable assembly has a male to male gender configuration with flexible LMR-200 series coax and operates to 5.8 GHz. The double shield of this SMA cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this SMA male to SMA male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30237-FT10 L-com Low Loss SMA Male to BNC Male Cable Assembly using LMR-200 Coax, 10 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
Número de parte (MPN)
Impedancia
50 Ohm
Interfaz
SMA
cable RF a medida desde plano para sourcing de producción
cable RF a medida desde plano orientado a producción con revisión de compatibilidad, guía de MOQ y soporte de reducción de coste.
Qué preparar antes del RFQ Los datos claros reducen las conjeturas y aceleran una respuesta útil. ⌄
- • Comparta el MPN de referencia, la pieza de acoplamiento o la marca de origen si es relevante para la revisión.
- • Agregue el BOM, la división de cantidad y la demanda anual si el proyecto supera el volumen de prototipo.
- • Adjunte el plano, la hoja de datos o los requisitos críticos de impedancia, frecuencia, montaje y recubrimiento.
Imagen
Haga clic para ampliar.
Specifications
| Interfaz | Coaxial Cable Assemblies |
|---|---|
| Interfaz | LMR-200 |
| Interfaz | SMA |
| Interfaz | BNC |
| Impedancia | 50 Ohm |
| Impedancia | 50 Ohm |
| Impedancia | 50 Ohm |
| Género | Male |
| Género | Male |
| Orientación | Straight |
| Orientación | Straight |
| Connector 1 Body Material | Passivated Stainless Steel |
Show 4 more specs
| Connector 1 Polarity | Standard |
|---|---|
| Connector 2 Polarity | Standard |
| Tipo de cable | LMR-200 |
| Category | Coaxial Cable Assemblies |
Descripción
Los datos de referencia para LCCA30237-FT10 incluyen actualmente: SMA · 50 Ohm · Straight. El catálogo muestra actualmente la configuración como: Straight. La impedancia se indica como 50 Ohm. Si es un parámetro crítico, confírmelo en el RFQ. Si faltan datos de montaje en el catálogo, confíe en el plano o requisito de acoplamiento. El material se indica como Passivated Stainless Steel. Es útil para revisión, pero no sustituye la confirmación completa del proyecto. Esta página es para revisión y preselección. La confirmación final de ajuste, MOQ y plazo viene tras la revisión del plano, especificación o BOM.
Use esta página para filtrar antes del RFQ. La ruta de suministro y la producción personalizada MOQ 200+ se confirman tras revisar plano/especificación/BOM.
Conectores similares
También podrían interesarle estos modelos:
095-850-250-024
BNC Straight Plug to SMA Straight Plug RG-316DS 50 Ohm 24 Inches
R451533500
RF conectores / Coaxial conectores DET SMA M-SUBC M 0 01-8 POS
PE3706LF
SMA Female to SMA Male Cable Using RG188 Coax , LF Solder
LCCA30255-FT2
L-com's LCCA30255-FT2 is a low loss SMA male to N male cable assembly using LMR-240 coax, 2 FT with Times Microwave components and ships same-day. The LMR-240 coax of this SMA cable uses the PE (F) dielectric with a VoP of 84%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com SMA to N cable assembly has a male to male gender configuration with flexible LMR-240 series coax and operates to 5.8 GHz. The double shield of this SMA cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this SMA male to SMA male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30255-FT2 L-com Low Loss SMA Male to N Male Cable Assembly using LMR-240 Coax, 2 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
A85T60-141S-
SMA jack bulkhead IP67 mated a TNC polaridad inversa enchufe using .141 conformable
SMA864N-0032
SMA jack SQ 12.7 mm 4 hole flange con round contacto (Φ0.3L=1.5) PTFE L=3.2 18 GHz VSWR1.2
Búsqueda por MPN Admite coincidencia exacta, por prefijo y parcial. ⌄
Aviso legal
Los nombres de fabricantes, marcas registradas, símbolos y números de pieza se utilizan solo con fines de identificación y referencia cruzada. Cstone Technology es un socio de abastecimiento de exportación con sede en China para alternativas compatibles y no está afiliada a las marcas originales. Las marcas registradas son propiedad de sus respectivos dueños. La idoneidad final se confirma mediante revisión de plano/especificación durante el RFQ.