Detalles del producto
L-com’s LCAD9802 75 ohm BNC female to BNC female adapter is part of our full line of RF components available for sameday shipping. Our BNC to BNC adapter has a female to female gender configuration. LCAD9802 BNC female to BNC female adapter operates to 1 GHz. The L-com RF adapter provides good VSWR of 1.3:1 maximum. RF adapters are often used to enable connections between two connector types that would otherwise not mate. Certain adapter configurations can also be used to protect connectors on expensive equipment where the number of connect/ disconnect cycles is high. An RF, microwave or millimeter wave adapter is connected to the equipment, and the commonly changed connection is made with the adapter which can be easily replaced when it wears out after high usage; such adapters are referred to as connector savers. L-com also offers bulkhead, panel mount, hermetically sealed, reverse polarity, and isolated ground adapter varieties to serve all of your RF, microwave and millimeter wave needs.
Número de parte (MPN)
Impedancia
75 Ohm
Frecuencia
DC
Interfaz
BNC
cable RF a medida desde plano para sourcing de producción
cable RF a medida desde plano orientado a producción con revisión de compatibilidad, guía de MOQ y soporte de reducción de coste.
Qué preparar antes del RFQ Los datos claros reducen las conjeturas y aceleran una respuesta útil. ⌄
- • Comparta el MPN de referencia, la pieza de acoplamiento o la marca de origen si es relevante para la revisión.
- • Agregue el BOM, la división de cantidad y la demanda anual si el proyecto supera el volumen de prototipo.
- • Adjunte el plano, la hoja de datos o los requisitos críticos de impedancia, frecuencia, montaje y recubrimiento.
Imagen
Haga clic para ampliar.
Specifications
| Interfaz | Coaxial Adapters |
|---|---|
| Interfaz | BNC |
| Interfaz | BNC |
| Impedancia | 75 Ohm |
| Impedancia | 75 Ohm |
| Frecuencia (máx.) | DC |
| Frecuencia (máx.) | 1 GHz |
| Género | Female |
| Género | Female |
| Adapter Body Style | Straight |
| Connector Polarity 1 | Standard |
| Connector Polarity 2 | Standard |
Show 5 more specs
| Montaje | None |
|---|---|
| Montaje | None |
| Category | Coaxial Adapters |
| Application | General Purpose Test; CATV |
| Product Features | Max VSWR of 1.3:1 up to 1 GHz; BNC interface compliant with MIL-STD-348A; 30 µin minimum contact plating; Gold Plated Brass Contact |
Descripción
Los datos de referencia para LCAD9802 incluyen actualmente: BNC · 75 Ohm · DC. La impedancia se indica como 75 Ohm. Si es un parámetro crítico, confírmelo en el RFQ. La frecuencia se indica como DC. El límite real depende del ensamblaje, par de acoplamiento y contexto. Si faltan datos de montaje en el catálogo, confíe en el plano o requisito de acoplamiento. Esta página es para revisión y preselección. La confirmación final de ajuste, MOQ y plazo viene tras la revisión del plano, especificación o BOM.
Use esta página para filtrar antes del RFQ. La ruta de suministro y la producción personalizada MOQ 200+ se confirman tras revisar plano/especificación/BOM.
Conectores similares
También podrían interesarle estos modelos:
LCCA30299-FT1
L-com's LCCA30299-FT1 is a low loss BNC male to N male cable assembly using LMR-400 coax, 1 FT with Times Microwave components and ships same-day. The LMR-400 coax of this BNC cable uses the PE (F) dielectric with a VoP of 85%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com BNC to N cable assembly has a male to male gender configuration with flexible LMR-400 series coax and operates to 6 GHz. The double shield of this BNC cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this BNC male to BNC male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30299-FT1 L-com Low Loss BNC Male to N Male Cable Assembly using LMR-400 Coax, 1 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
095-850-300-036
HD-BNC Straight Bulkhead Jack IP67 to HD-BNC Straight Plug B4855R 75 Ohm 36 inches 12G
B60T60-L240-
BNC polaridad inversa enchufe a TNC polaridad inversa enchufe using JBY240
B60T39-85T-
BNC polaridad inversa enchufe a TNC enchufe en ángulo recto using .085 semi-rigid
112418WH
BNC Right Angle PCB Jack Through Hole Bulkhead Rear Mount 50 Ohm
BNC8550-0000
BNC jack bulkhead con soldadura cup contacto 4 GHz VSWR1.2
Búsqueda por MPN Admite coincidencia exacta, por prefijo y parcial. ⌄
Aviso legal
Los nombres de fabricantes, marcas registradas, símbolos y números de pieza se utilizan solo con fines de identificación y referencia cruzada. Cstone Technology es un socio de abastecimiento de exportación con sede en China para alternativas compatibles y no está afiliada a las marcas originales. Las marcas registradas son propiedad de sus respectivos dueños. La idoneidad final se confirma mediante revisión de plano/especificación durante el RFQ.