Detalles del producto
TRB 3-Slot Straight Plug 78 Ohm
Número de parte (MPN)
Impedancia
78 Ohm
Interfaz
TRB 3-Slot
cable RF a medida desde plano para sourcing de producción
cable RF a medida desde plano orientado a producción con revisión de compatibilidad, guía de MOQ y soporte de reducción de coste.
Qué preparar antes del RFQ Los datos claros reducen las conjeturas y aceleran una respuesta útil. ⌄
- • Comparta el MPN de referencia, la pieza de acoplamiento o la marca de origen si es relevante para la revisión.
- • Agregue el BOM, la división de cantidad y la demanda anual si el proyecto supera el volumen de prototipo.
- • Adjunte el plano, la hoja de datos o los requisitos críticos de impedancia, frecuencia, montaje y recubrimiento.
Imagen
Haga clic para ampliar.
Specifications
| Interfaz | Coaxial Cable Assemblies |
|---|---|
| Interfaz | 30-02001-LC |
| Interfaz | TRB 3-Slot |
| Interfaz | TRB 3-Lug |
| Impedancia | 78 Ohm |
| Impedancia | 78 Ohm |
| Impedancia | 78 Ohm |
| Género | Plug |
| Género | Jack |
| Orientación | Straight |
| Orientación | Straight |
| Connector 1 Body Material | Brass |
Show 6 more specs
| Connector 1 Body Plating | Nickel |
|---|---|
| Connector 1 Polarity | Standard |
| Connector 2 Polarity | Standard |
| Tipo de cable | 30-02001-LC |
| Length, Max | 60 inches |
| Category | Coaxial Cable Assemblies |
Descripción
Los datos de referencia para LC3MP2177-60 incluyen actualmente: TRB 3-Slot · 78 Ohm · Straight. El catálogo muestra actualmente la configuración como: Straight. La impedancia se indica como 78 Ohm. Si es un parámetro crítico, confírmelo en el RFQ. Si faltan datos de montaje en el catálogo, confíe en el plano o requisito de acoplamiento. El material se indica como Brass. Es útil para revisión, pero no sustituye la confirmación completa del proyecto. Esta página es para revisión y preselección. La confirmación final de ajuste, MOQ y plazo viene tras la revisión del plano, especificación o BOM.
Use esta página para filtrar antes del RFQ. La ruta de suministro y la producción personalizada MOQ 200+ se confirman tras revisar plano/especificación/BOM.
Conectores similares
También podrían interesarle estos modelos:
LCCA30155-FT3
L-com's LCCA30155-FT3 is a low loss N male right angle to N male right angle cable assembly using LMR-195 coax, 3 FT with Times Microwave components and ships same-day. The LMR-195 coax of this N cable uses the PE (F) dielectric with a VoP of 80%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com N to N cable assembly has a male to male gender configuration with flexible LMR-195 series coax and operates to 5.8 GHz. The double shield of this N cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. This right angle N cable interface on the LMR-195 coax allows for easier connections in tight spaces. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N male to N male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30155-FT3 L-com Low Loss N Male Right Angle to N Male Right Angle Cable Assembly using LMR-195 Coax, 3 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
LCCA30265-FT10
L-com's LCCA30265-FT10 is a low loss 4.3-10 male to N male cable assembly using LMR-240 coax, 10 FT with Times Microwave components and ships same-day. The LMR-240 coax of this 4.3-10 cable uses the PE (F) dielectric with a VoP of 84%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com 4.3-10 to N cable assembly has a male to male gender configuration with flexible LMR-240 series coax and operates to 5.8 GHz. The double shield of this 4.3-10 cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this 4.3-10 male to 4.3-10 male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30265-FT10 L-com Low Loss 4.3-10 Male to N Male Cable Assembly using LMR-240 Coax, 10 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.
L17HTHEP3F1CO
conectores D-Sub estándar Dsub Stamped Signal 3A en ángulo recto PCB montaje pasante alta Temp alta densidad FP=8.89 mm (.350in) 15 pin Bright estaño Shell+Grounding Dimples Flash oro M3 Removable Front Screwlock Ground Tab y Boardlock Plastic bandeja Open Back
L17HTHAP4F1CO
conectores D-Sub estándar Dsub Stamped Signal 3A en ángulo recto PCB montaje pasante alta Temp alta densidad FP=8.89 mm (.350in) 26 pin Bright estaño Shell+Grounding Dimples Flash oro 4-40 Removable Front Screwlock Ground Tab y Boardlock Plastic bandeja Open Back
SMD5FRA110
DIN conectores 3C MINI DIN RA PC MT UNSHLD no SNAP-IN
T3376-550
Circular DIN conectores macho receptáculo 5 WAY
Búsqueda por MPN Admite coincidencia exacta, por prefijo y parcial. ⌄
Aviso legal
Los nombres de fabricantes, marcas registradas, símbolos y números de pieza se utilizan solo con fines de identificación y referencia cruzada. Cstone Technology es un socio de abastecimiento de exportación con sede en China para alternativas compatibles y no está afiliada a las marcas originales. Las marcas registradas son propiedad de sus respectivos dueños. La idoneidad final se confirma mediante revisión de plano/especificación durante el RFQ.