CSTONE
Lista RFQ

Detalles del producto

TRB 3-Slot Straight Plug 78 Ohm

Alternativa compatible de origen chino — validamos el ajuste con su plano/especificación.

Número de parte (MPN)

LC3CA2014-36

Impedancia

78 Ohm

Interfaz

TRB 3-Slot

cable RF a medida desde plano para sourcing de producción

cable RF a medida desde plano orientado a producción con revisión de compatibilidad, guía de MOQ y soporte de reducción de coste.

Cable RF a medida desde plano →
WhatsApp — Respuesta rápida
Plazo: 3–6 sem. | MOQ: 200+ uds
Qué preparar antes del RFQ Los datos claros reducen las conjeturas y aceleran una respuesta útil.
  • Comparta el MPN de referencia, la pieza de acoplamiento o la marca de origen si es relevante para la revisión.
  • Agregue el BOM, la división de cantidad y la demanda anual si el proyecto supera el volumen de prototipo.
  • Adjunte el plano, la hoja de datos o los requisitos críticos de impedancia, frecuencia, montaje y recubrimiento.

Imagen

Haga clic para ampliar.

Imagen del producto

LC3CA2014-36 product photo

LC3CA2014-36 product photo

Specifications

Specifications for LC3CA2014-36
InterfazCoaxial Cable Assemblies
Interfaz30-02003-LC
InterfazTRB 3-Slot
InterfazTRB 3-Slot
Impedancia78 Ohm
Impedancia78 Ohm
Impedancia78 Ohm
GéneroPlug
GéneroPlug
OrientaciónStraight
OrientaciónStraight
Connector 1 Body MaterialBrass
Show 6 more specs
Connector 1 Body PlatingNickel
Connector 1 PolarityStandard
Connector 2 PolarityStandard
Tipo de cable30-02003-LC
Length, Max36 inches
CategoryCoaxial Cable Assemblies

Descripción

Los datos de referencia para LC3CA2014-36 incluyen actualmente: TRB 3-Slot · 78 Ohm · Straight. El catálogo muestra actualmente la configuración como: Straight. La impedancia se indica como 78 Ohm. Si es un parámetro crítico, confírmelo en el RFQ. Si faltan datos de montaje en el catálogo, confíe en el plano o requisito de acoplamiento. El material se indica como Brass. Es útil para revisión, pero no sustituye la confirmación completa del proyecto. Esta página es para revisión y preselección. La confirmación final de ajuste, MOQ y plazo viene tras la revisión del plano, especificación o BOM.

Use esta página para filtrar antes del RFQ. La ruta de suministro y la producción personalizada MOQ 200+ se confirman tras revisar plano/especificación/BOM.

Conectores similares

También podrían interesarle estos modelos:

LCCA30204-FT10

L-com's LCCA30204-FT10 is a low loss N male to N female cable assembly using LMR-400-DB coax, 10 FT with Times Microwave components and ships same-day. The LMR-400-DB coax of this N cable uses the PE (F) dielectric with a VoP of 85%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com N to N cable assembly has a male to female gender configuration with flexible LMR-400-DB series coax and operates to 6 GHz. The double shield of this N cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this N male to N female cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30204-FT10 L-com Low Loss N Male to N Female Cable Assembly using LMR-400-DB Coax, 10 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.

Ver detalles →

LC3MSA00436-12

The L-com LC3MSA00436-12 MIL-STD-1553 flexible RF cable assembly is perfect for applications that need tight bends and flexible cable. This TRB 3-slot to TRB 3-slot cable assembly is plug to plug and made of 78 ohm flexible M17-176-00002-LC twinax. Our 78 Ohm cable assembly is available with a PFA jacket and a copper inner conductor with silver plating. We offer a blue, 0.57-inch OD TRB 3-slot to TRB 3-slot cable that operates at 10 MHz.This blue RF cable assembly is the most commonly utilized cable assembly in wide connectivity applications such as bus couplers, avionics control boxes, and bus relay. L-com's LC3MSA00436-12 MIL-STD-1553 flexible RF cable assembly is available with PTFE dielectric. Our TRB 3-slot plug to TRB 3-slot plug cable has bayonet coupling connectors made of brass with nickel plating. This RF flexible M17-176-00002-LC twinax cable operates between -55 and 200 degrees Celsius.L-com has one of the largest in-stock selections of MIL-STD-1553 flexible RF cable assembly with same-day shipment for domestic and international orders. We are a global leader of wired and wireless connectivity products, offering a wide range of solutions across many key industries, including electronics, medical, industrial automation, military, and telecommunication. For further information on similar products, our expert technical support and trained sales team can get you the perfect TRB 3-slot plug to TRB 3-slot plug cable as per your requirements.

Ver detalles →

LCCA30217-FT1

L-com's LCCA30217-FT1 is a low loss 7/16 DIN male to 7/16 DIN male cable assembly using LMR-600-DB coax, 1 FT with Times Microwave components and ships same-day. The LMR-600-DB coax of this 7/16 DIN cable uses the PE (F) dielectric with a VoP of 87%, resulting in very low insertion loss compared to solid dielectrics. These flexible RF cable assemblies are ideal for applications where flexure is required. Our L-com 7/16 DIN to 7/16 DIN cable assembly has a male to male gender configuration with flexible LMR-600-DB series coax and operates to 5.8 GHz. The double shield of this 7/16 DIN cable is layered by tinned copper braid over aluminum tape providing shielding effectiveness greater than 90dB. *LMR™ is a trademark of Times Microwave Systems. Custom versions of this 7/16 DIN male to 7/16 DIN male cable, along with the rest of L-com's other RF assemblies, can also be built and shipped same day. Other available RF cable assembly value added services from L-com include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. Contact a sales representative for testing or custom RF cable quotes. Part number LCCA30217-FT1 L-com Low Loss 7/16 DIN Male to 7/16 DIN Male Cable Assembly using LMR-600-DB Coax, 1 FT with Times Microwave Components data sheet PDF includes details of the RF product specifications, CAD drawing(s) and dimensions below.

Ver detalles →

611-0510

Circular DIN conectores enchufe 5P 60 DEG BLK

Ver detalles →

L17HTNEP4F4R

conectores D-Sub estándar Dsub Stamped Signal 3A en ángulo recto PCB montaje pasante alta Temp Std densidad FP=8.08 mm (.318in) 09 pin Bright estaño Shell+Grounding Dimples 0.76 m (30 in) oro 4-40 Removable Front Screwlock Ground Tab y Boardlock Tape y carrete Closed Back

Ver detalles →

T3379-502

Circular DIN conectores macho cable conector 5 WAY

Ver detalles →
Búsqueda por MPN Admite coincidencia exacta, por prefijo y parcial.

Admite coincidencia exacta, por prefijo y parcial.

Aviso legal

Cstone es una fábrica profesional, no una empresa comercial, especializada en conectores RF y coaxiales, adaptadores y conjuntos de cable, incluidos N-type, BNC, SMA, SMP, SSMB y MMCX. Fabricamos conectores según planos 2D o muestras; el ajuste, MOQ, plazo y detalles de producción se confirman por RFQ. Cstone Technology no está afiliada a las marcas originales. Los nombres de fabricantes, marcas registradas, símbolos y números de pieza se utilizan solo con fines de identificación y referencia cruzada. Las marcas registradas son propiedad de sus respectivos dueños. La idoneidad final se confirma mediante revisión de plano/especificación durante el RFQ.